1. Input/Output & General Performance

️· VIN – VOUT: Test condition commonly used (5V)
️· IOUT: Test current (0.5A)
️· PMAX: Maximum Power Dissipation (20W)
️· IMAX: Maximum Output Current (1.5A)
️· VMAX: Maximum Input Voltage (40V standard, 50V for HV series)

2. Regulation (Voltage Stability)

️· Temperature Stability: 0.6% - 1.5% change in output voltage over 0-125°C
️· Long-Term Stability: 0.3% - 1% change over 1000 hours
️· Load Regulation (Information is limited in the excerpt but points to testing done at a specific current)

3. Noise & Ripple

️· RMS Output Noise: 0.003% of VOUT (measured 10Hz – 10kHz, 25°C)
️· Ripple Rejection:
- 60-80 dB (VOUT = 10V, f = 120Hz, CADJ varies)

4. Current Related Parameters

️· Adjust Pin Current (IADJ): 65-100mA
️· Adjust Pin Current Change (DIADJ): Up to 6mA (depending on temperature and VIN-VOUT)
️· Minimum Load Current (IMIN): 1.2-10mA (depending on conditions and series)
️· Current Limit (ICL): Varies with conditions. Examples: 1.5-3.5A (VIN-VOUT <= 15V), 0.15-1A (VIN-VOUT = 40/50V)

5. Thermal Resistance

️· RqJC (Junction-to-Case Thermal Resistance):
- K Package: 2.3-3 °C/W
- T Package: 4 °C/W

6. Key Specs / Highlights
️· Dropout Voltage: (Not explicitly stated in this excerpt, but is an important characteristic).
️· HV Series: A high voltage variant exists with a maximum input voltage of 50V.



Important Notes:

️· This is a partial summary. The datasheet likely contains more detailed specifications and graphs.
️· Values often depend on the test conditions (temperature, input voltage, load current).
️· Pay attention to the series (standard vs. HV) as specifications differ.
️· The parameters have variations depending on package type (K, T etc.)