MP1113-A-RV
AI

The **MP1113-A-RV** belongs to a series of high-performance, miniaturized power modules or integrated circuits, typically used in industrial and consumer electronics for voltage regulation and signal conditioning.
Below is a detailed breakdown of its electronic characteristics and technical specifications.
---
## 1. Component Overview
The MP1113 series is often associated with **Monolithic Power Systems (MPS)** or specialized power management manufacturers. These components are designed to provide high efficiency in a compact footprint.
### Key Specifications
| Feature | Description |
| :--- | :--- |
| **Type** | Power Management IC (PMIC) / Step-Down Converter |
| **Package** | Surface Mount (SMD) |
| **Input Voltage Range** | Typically 4V to 28V (depending on specific sub-variant) |
| **Output Current** | Up to 3A continuous |
| **Efficiency** | Up to 95% |
| **Switching Frequency** | High Frequency (500kHz - 1.2MHz) for smaller inductors |
---
## 2. Internal Electronic Architecture
The "RV" suffix usually denotes a specific revision or a "Reflow-able" version meant for automated assembly. The internal structure includes:
1. **MOSFET Switches:** Integrated high-side and low-side power MOSFETs to minimize external component count.
2. **Control Loop:** A Current Mode Control architecture that provides fast transient response and eases loop stabilization.
3. **Protection Circuits:**
* **OCP (Over-Current Protection):** Prevents damage during short circuits.
* **OTP (Over-Temperature Protection):** Thermal shutdown if the die temperature exceeds safety limits (usually ~150°C).
* **UVLO (Under-Voltage Lockout):** Ensures the chip only operates when the input voltage is high enough to be stable.
---
## 3. Typical Application Circuit
To use the MP1113-A-RV, a standard buck converter configuration is required.
```markdown
Vin ----[ C_in ]----+----[ MP1113 ]----+----[ L1 ]----+---- Vout
| | | |
GND EN/SS SW [ C_out ]
| |
[ D1 ]* GND
|
GND
(*Note: D1 is only required if the IC is non-synchronous)
```
---
## 4. Pin Configuration Functions
The "A" variant typically features specific pin assignments optimized for noise reduction:
* **VIN:** Input supply pin.
* **SW (Switch):** Output node of the internal power switches connected to the inductor.
* **FB (Feedback):** Input to the error amplifier; used to set the output voltage via a resistor divider.
* **EN (Enable):** Logic level input to turn the device on or off.
* **BST (Bootstrap):** Used to provide the gate drive voltage for the high-side MOSFET.
---
- ⤷
What is the exact pinout diagram for the MP1113-A-RV?
- ⤷ What are the recommended values for the output inductor and capacitor?
- ⤷ Does this part have a direct equivalent or cross-reference from another manufacturer?