Description
The X-NUCLEO-OUT10A1 industrial digital output expansion board for STM32 Nucleo provides an affordable and easy-to-use solution for the development of 0.5 A (typ.) digital output modules, letting you easily evaluate the IPS161HF driving and diagnostic capabilities with industrial loads. The X-NUCLEO-OUT10A1 interfaces with the microcontroller on the STM32 Nucleo via 3 kV optocouplers driven by GPIO pins and Arduino™ UNO R3 (default configuration) and ST morpho (optional, not mounted) connectors. The expansion board should be connected to either a NUCLEO-F401RE or NUCLEO-G431RB development board, and can be stacked with another XNUCLEO-OUT10A1 or an X-NUCLEO-OUT08A1 . Two X-NUCLEO-OUT10A1 expansion boards allows you to evaluate a dual channel digital output module with 0.5 A (typ.) capability each, or a 0.5 A (typ.) single channel safety digital output module. In the second scenario, the first shield output is connected to the supply of the second one. Dedicated on-board hardware can be enabled or disabled to activate fast discharge of high capacitive loads, output voltage sensing and additional surge pulse output line protection. Product summary Industrial digital output expansion board based on IPS161HF for STM32 Nucleo X-NUCLEOOUT10A1 Single high-side switch IPS161HF

Features
■ Based on IPS161HF single high-side switch with the following main features: – Operating range up to 60 V/0.7 A – Low power dissipation (RON(MAX) = 120 mΩ) – Fast decay for inductive loads – Open load detection and diagnostics – Overload and overheating protections with thermal shut-down and cut-off – PowerSSO-12L package
■ Application board operating range: 12 - 33 V, 0 to 0.7 A
■ Extended voltage operating range (J1 open) up to 60 V
■ Green LED for output ON/OFF status
■ Red LED for diagnostics (open load, cut-off and overheating)
■ 3 kV galvanic isolation
■ Supply rail reverse polarity protection
■ Ready for Safety Digital Output Architecture
■ EMC compliance according to IEC61000-4-2, IEC61000-4-3, IEC61000-4-5
■ Wide application development potential in STM32 Nucleo development environment
■ Equipped with Arduino™ UNO R3 connectors
■ CE certified
■ RoHS and China RoHS compliant