1 Features
1• (For 5V Supply, Typ Unless Noted)
• Rail-to-Rail Input CMVR −0.25 V to 5.25 V
• Rail-to-Rail Output Swing 0.01V to 4.99V
• High Gain-Bandwidth, 10 MHz at 20 kHz
• Slew Rate 12 V/μs
• Low Supply Current 360 μA/Amp
• Wide Supply Range 2.7 V to over 24 V
• CMRR 100 dB
• Gain 100 dB with RL = 10 k
• PSRR 82 dB

2 Applications
• Battery Operated Instrumentation
• Instrumentation Amplifiers
• Portable Scanners
• Wireless Communications
• Flat Panel Display Driver

3 Description
The LM6132/34 provides new levels of speed vs.
power performance in applications where low voltage supplies or power limitations previously made
compromise necessary. With only 360 μA/amp supply
current, the 10 MHz gain-bandwidth of this device
supports new portable applications where higher power devices unacceptably drain battery life.
The LM6132/34 can be driven by voltages that exceed both power supply rails, thus eliminating
concerns over exceeding the common-mode voltage
range. The rail-to-rail output swing capability provides
the maximum possible dynamic range at the output.
This is particularly important when operating on low
supply voltages. The LM6132/34 can also drive large capacitive loads without oscillating.
Operating on supplies from 2.7 V to over 24 V, the
LM6132/34 is excellent for a very wide range of
applications, from battery operated systems with
large bandwidth requirements to high speed
instrumentation.