1 Features
• 820MHz to 1054MHz RF front end module
• Transmit (TX):
– Saturated output power (PSAT): 27.5dBm (3.3V)
– PA gain: 24dB
– PAE: 42.2% at 27dBm
– HD2 / HD3: –56dBc / –70dBc
• Receive (RX) LNA:
– Gain: 16dB
– Noise figure (NF): 1.3dB
– IP1dB: –6.7dBm
• ANT to RX_FLT insertion loss: 1.5dB
• Integrated 50Ω RF match
• Integrated linear-in-dB power detector
• Supply voltage: 3.1V to 4.25V
• Total supply current at 3.3V:
– 360mA (TX PO = 27dBm)
– 65mA (TX, no RF)
– 10.3mA (RX only)
• Low sleep mode current: 0.05μA
• Operating ambient temperature range:
–40°C to 85°C

2 Applications
• 820MHz to 1054MHz wireless systems
• IEEE 802.15.4 systems
• Smart grid and smart meters:
– Electricity meters
– Water meters
– Gas meters
– Heat meters
• Smart data concentrators & collectors
• Energy infrastructure wireless communications
• Wireless building automation systems
• Wireless field transmitters & sensors
• Wireless EV charging stations

3 Description
The TRF2001P is a high-performance RF front-end
module (FEM) for low-power wireless applications
in sub-1GHz industrial, scientific, and medical (ISM)
bands operating over an 820MHz to 1054MHz
frequency range. The TRF2001P requires minimal
external BOM and includes functions such as a
range-extender power amplifier (PA) and a low noise
amplifier (LNA), transmit-receive antenna switch,
antenna port low pass filter, and a linear-in-dB RF
power detector, for a cost-effective design in a spacesaving
4.5mm × 4.5mm QFN-28 package.
The TRF2001P increases the link budget and allows
range extension in wireless systems by providing
high output power with the integrated PA, beyond the
capabilities of a WMCU or transceiver, and improves
the receiver sensitivity with a low noise figure LNA.
The integrated power detector can be used for system
calibration or to monitor the power being delivered to
the antenna. The device features fully matched, 50Ω
RF interfaces for ease of use and design flexibility.
The TRF2001P is operational over a wide, 3.1V to
4.25V supply range, with digital controls that are
compatible with 1.6V to 3.3V CMOS logic levels.