|
Features:
Analog Inputs:
Used in the Oscilloscope, Network Analyzer,
Spectrum Analyzer, Voltmeter, Impedance
Analyzer, and Data Logger
Two analog input channels, accessible
through BNC or MTE connectors
Channel type: differential (with MTE) or
single‐ended (with BNC)
Analog bandwidth with BNC cables: 30+
MHz @ 3dB
Analog bandwidth with MTE flywires: 9 MHz
@ 3dB
Input range ±25 V (±50 V diff)
Input protected to ±50 V
14‐bit resolution
Operate at 100 MS/s
Analog Outputs:
Used in the Waveform Generator and
Network Analyzer
Two arbitrary waveform generator
channels, accessible through BNC or MTE
connectors
AC amplitude (max): ±5 V
Analog bandwidth (BNC or MTE connectors:
8 MHz @ 3dB)
Operate at 100 MS/s
Digital Inputs and Outputs:
Used in the Logic Analyzer, Pattern
Generator, Protocol Analyzer, and Digital
I/O
Channels: 16
Input logic standard: LVCMOS (1.8/3.3V, 5V
tolerant)
Output logic standard: LVCMOS (3.3V,
12mA)
Power Supplies:
12 volt supply: 12V ±5%; 0.2 Amps max
‐12 volt supply: ‐12V ±5%, 0.2 Amps max
5 volt supply: 5.0V ±5%; 1.0 Amps max
3.3 volt supply: 3.3V ±5%; 1.0 Amps max
V+ and V‐ rails: 1V to 5V (V+), and ‐1V to ‐5V
(V‐)
Maximum power output: 2.1W for each
supply
Maximum current output: 700mA for
each supply.
|