012BL-S08-R Price, sprzedawcę, Stock

Key Specifications, Connector Series: N, Connector Gender: Male, Chain Option: Chain. N Male Open Circuit Connector Cap with 3.75 Inch Chain. Pasternack’s M39012/25-0012 RF coaxial connector cap (which can also be referred to as an RF connector dust cap in some cases) is available in a non-shorting design. This non-shorting RF connector cap has a N-type connector series and a male gender. Our N-type male non-shorting connector cap is manufactured with a brass body material and silver body plating. Our silver-plated dust cap comes with a 3.75-inch long chain to prevent loss and misplacement. Our M39012/25-0012 dust cap has a length of 4.95 inches, a width of 0.78 inches, and a height of 0.78 inches. These RF connector dust caps are essential for precision connectors to protect them from dust, corrosion, and other potential damage. Additional dimensions and specifications for this N-type male connector cap are on our downloadable PDF datasheet above. Our coaxial non-shorting protective dust cap is just one part of over one million RF components supplied by Pasternack. The M39012/25-0012 connector dust cap is in stock and will ship on the same business day as purchased. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal RF connector dust cap for your requirements.

1 : $37.69
25 : $35.81
50 : $33.92
100 : $32.41

845

PE3750-12

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm, Length: 12 inches. N Male to BNC Male Cable 12 Inch Length Using RG213 Coax., Radio frequency assembly N male to BNC male cable 12 inch length using RG213 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to BNC male cable 12 inch length using RG213 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and BNC cable connection on the other. Our type N to BNC cable assemblies have a male gender on end 1 and male on end 2. This N type to BNC cable is a male to male coax assembly, PE3750-12, can also be known as a type N plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to BNC plug cable assembly PE3750-12 is built with RG213 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency type N male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3750-12 can also be used in the other direction and will be BNC male to N type male cable assembly if the opposite connectivity is required. Type N plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to BNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to BNC male cable 12 inch length using RG213 coax.

1 : $92.09
25 : $87.49
50 : $82.88
100 : $79.2

374

PE3C0121/WP-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 SMA Male (Plug) to N Male (Plug) Low Loss Cable 48 Inch Length Using LMR-195 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 SMA male (plug) to N male (plug) low loss cable 48 inch length using LMR-195 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a type N cable connection on the other. Our low loss SMA to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0121/WP-48 can also be known as a low loss SMA plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0121/WP-48 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our SMA male to type N male cable has a maximum VSWR of 1.4:1. SMA plug to type N plug cable assembly PE3C0121/WP-48 is built with LMR-195 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C0121/WP-48 can also be used in the other direction and will be a type N male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA Waterproof and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $100.99
25 : $95.94
50 : $90.89
100 : $86.85

340

PE3C0120-12

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 12 inches. N Male to N Male Right Angle with Times Connectors Cable 12 Inch Length Using LMR-195 Coax., Radio frequency assembly N male to N male right angle with times connectors cable 12 inch length using LMR-195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to N male right angle with times connectors cable 12 inch length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and right angle N type cable connection on the other. Our low loss type N to right angle type N cable assemblies have a male gender on end 1 and male on end 2. This type N to type N cable is a male to male coax assembly, PE3C0120-12, can also be known as a low loss N type plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE3C0120-12 is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0120-12 can also be used in the other direction and will be right angle type N male to N type male cable assembly if the opposite connectivity is required. Low loss N type plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle with times connectors cable 12 inch length using LMR-195 coax.

1 : $83.49
25 : $79.32
50 : $75.14
100 : $71.8

254

PE34170-12

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG401/U, RF Cable Type: RG401, RF Cable Impedance: 50 Ohm, Length: 12 inches. BNC Male to BNC Male Cable 12 Inch Length Using RG401 Coax., Radio frequency assembly BNC male to BNC male cable 12 inch length using RG401 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC male cable 12 inch length using RG401 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE34170-12, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE34170-12 is built with RG401 which is a semi-rigid coax type. The Pasternack semi-rigid BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 12 inch length using RG401 coax.

1 : $203.99
25 : $193.79
50 : $183.59

198

PE3M0120-12

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/28-RG058-0XDS2, RF Cable Type: M17/28-RG058, RF Cable Impedance: 50 Ohm, Length: 12 inches. MIL-DTL-17 SMA Male to SMA Male Right Angle Cable 12 Inch Length Using M17/28-RG58 Coax., Radio frequency assembly MIL-DTL-17 SMA male to SMA male right angle cable 12 inch length using M17/28-RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 SMA male to SMA male right angle cable 12 inch length using M17/28-RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/55-3029 SMA to M39012/56-3129 SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/55-3029 SMA cable connection on one end and right angle M39012/56-3129 SMA cable connection on the other. Our M39012/55-3029 SMA to right angle M39012/56-3129 SMA cable assemblies have a male gender on end 1 and male on end 2. This M39012/55-3029 SMA to M39012/56-3129 SMA cable is a male to male coax assembly, PE3M0120-12, can also be known as a MIL-DTL-17/MIL-C-17 M39012/55-3029 SMA plug to right angle M39012/56-3129 SMA plug cable assembly and will be shipped same-day as it is purchased. M39012/55-3029 SMA plug to M39012/56-3129 SMA plug cable assembly PE3M0120-12 is built with M17/28-RG058 which is a flexible coax type. The Pasternack flexible M39012/55-3029 SMA cable assembly is manufactured with M39012/55-3029 SMA to right angle M39012/56-3129 SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MIL-C-17 1 GHz maximum frequency M39012/55-3029 SMA male to M39012/56-3129 SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0120-12 can also be used in the other direction and will be right angle M39012/56-3129 SMA male to M39012/55-3029 SMA male cable assembly if the opposite connectivity is required. M39012/55-3029 SMA plug to M39012/56-3129 SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/55-3029 SMA to M39012/56-3129 SMA cable assembly for quick shipment worldwide. Variations of M39012/55-3029 SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 SMA male to SMA male right angle cable 12 inch length using M17/28-RG58 coax.

1 : $415.99
25 : $395.19
50 : $374.39

PE-W28F012

Pasternack Enterprises

Key Specifications. Waveguide Size 1 WR-28 Waveguide Size 2 WR-28 Frequency, Min 30 GHz Frequency, Max 40 GHz Lowband Min Rejection 50. Highpass Waveguide Filter With WR-28 Interface Operating from 30 GHz to 40 GHz. The PE-W28F012 is a WR-28 highpass filter with UG Cover Flanges. The pass band is 10 GHz, or 30 to 40 GHz. Implementing a waveguide design, the filter has excellent rejection of 50 dB minimum at 22 GHz, or about 8000 MHz from the band edge. It has a maximum insertion loss of 0.5 dB.

1 : $1,420.0
5 : $1,391.6
10 : $1,363.2
25 : $1,334.8

PE3W01240-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Clamped SMA Male to SMA Male Low Loss Cable 12 Inch Length Using PE-P195 Coax., Radio frequency assembly clamped SMA male to SMA male low loss cable 12 inch length using PE-P195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Clamped SMA male to SMA male low loss cable 12 inch length using PE-P195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W01240-12 can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3W01240-12 is built with PE-P195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 12.4 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this clamped SMA male to SMA male low loss cable 12 inch length using PE-P195 coax.

1 : $134.99
25 : $128.24
50 : $121.49
100 : $116.09

PE33701-24

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm, Length: 24 inches. TNC Male to BNC Male Cable 24 Inch Length Using RG214 Coax., Radio frequency assembly TNC male to BNC male cable 24 inch length using RG214 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC male to BNC male cable 24 inch length using RG214 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and BNC cable connection on the other. Our TNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This TNC to BNC cable is a male to male coax assembly, PE33701-24, can also be known as a TNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to BNC plug cable assembly PE33701-24 is built with RG214 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency TNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33701-24 can also be used in the other direction and will be BNC male to TNC male cable assembly if the opposite connectivity is required. TNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to BNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to BNC male cable 24 inch length using RG214 coax.

1 : $111.99
25 : $106.39
50 : $100.79
100 : $96.31

PE35430-12

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to SSMA Male Cable 12 Inch Length Using RG174 Coax., Radio frequency assembly SMA male to SSMA male cable 12 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SSMA male cable 12 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SSMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SSMA cable connection on the other. Our SMA to SSMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SSMA cable is a male to male coax assembly, PE35430-12, can also be known as a SMA plug to SSMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SSMA plug cable assembly PE35430-12 is built with RG174 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SSMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SMA male to SSMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE35430-12 can also be used in the other direction and will be SSMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SSMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SSMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SSMA male cable 12 inch length using RG174 coax.

1 : $96.29
25 : $91.48
50 : $86.66
100 : $82.81

PE36860-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Female to TNC Male Cable 12 Inch Length Using RG214 Coax., Radio frequency assembly N female to TNC male cable 12 inch length using RG214 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The N female to TNC male cable 12 inch length using RG214 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and TNC cable connection on the other. Our N type to TNC cable assembly has female gender on end 1 and male on end 2. PE36860-12 can also be known as a N type jack to TNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PE (LD) dielectric type. Type N jack to TNC plug cable assembly PE36860-12 is built with RG214 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE36860-12 RF cable are available on our downloadable PDF datasheet.PE36860-12 can also be used in the other direction and will be TNC male to type N female cable assembly if the opposite connectivity is required. N type jack to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal N RF cable assembly as per your requirements.

1 : $126.99
25 : $120.64
50 : $114.29
100 : $109.21

PE3C2360-12

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to BNC Male Cable 12 Inch Length Using RG316 Coax., Radio frequency assembly SMA male to BNC male cable 12 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to BNC male cable 12 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to BNC cable is a male to male coax assembly, PE3C2360-12, can also be known as a SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3C2360-12 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2360-12 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male cable 12 inch length using RG316 coax.

1 : $68.49
25 : $65.07
50 : $61.64
100 : $58.9

PE3C3420-12

Pasternack Enterprises

Key Specifications, Connector Series 1: FME, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 12 inches. FME Plug to BNC Male Cable 12 Inch Length Using RG174 Coax., Radio frequency assembly FME plug to BNC male cable 12 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. FME plug to BNC male cable 12 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FME to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with FME cable connection on one end and BNC cable connection on the other. Our FME to BNC cable assemblies have a plug gender on end 1 and male on end 2. This FME to BNC cable is a plug to male coax assembly, PE3C3420-12, can also be known as a FME male to BNC plug cable assembly and will be shipped same-day as it is purchased. FME male to BNC plug cable assembly PE3C3420-12 is built with RG174 which is a flexible coax type. The Pasternack flexible FME cable assembly is manufactured with FME to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this FME plug to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3420-12 can also be used in the other direction and will be BNC male to FME plug cable assembly if the opposite connectivity is required. FME male to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FME to BNC cable assembly for quick shipment worldwide. Variations of FME cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this FME plug to BNC male cable 12 inch length using RG174 coax.

1 : $55.69
25 : $52.91
50 : $50.12
100 : $47.89

PE3C6470-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Mini SMP Female to SMA Female Cable 12 Inch Length Using PE-P086 Coax., Radio frequency assembly mini SMP female to SMA female cable 12 inch length using PE-P086 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Mini SMP female to SMA female cable 12 inch length using PE-P086 coax, mini SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMP to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with mini SMP cable connection on one end and SMA cable connection on the other. Our mini SMP to SMA cable assemblies have a female gender on end 1 and female on end 2. PE3C6470-12 can also be known as a mini SMP jack to SMA jack cable assembly and will be shipped same-day as it is purchased. Mini SMP jack to SMA jack cable assembly PE3C6470-12 is built with PE-P086 which is a flexible coax type. The Pasternack flexible Mini SMP cable assembly is manufactured with mini SMP to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 18 GHz maximum frequency mini SMP female to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6470-12 can also be used in the other direction and will be SMA female to mini SMP female cable assembly if the opposite connectivity is required. Mini SMP jack to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this mini SMP female to SMA female cable 12 inch length using PE-P086 coax.

1 : $156.99
25 : $149.14
50 : $141.29
100 : $135.01

Teledyne HiRel

5962-87631012A

Teledyne HiRel

FLIP-FLOP, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-88543012A

Teledyne HiRel

IDENTITY COMPARATOR, 8-BIT, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-87623012A

Teledyne HiRel

DECODER, DUAL 2-TO-4-LINE
RoHS : Not Compliant

5962-88752012A

Teledyne HiRel

HEX INVERTER, SCHMITT TRIGGER
RoHS : Not Compliant

5962-89487012A

Teledyne HiRel

NAND GATE, QUAD 2-INPUT, SCHMITT TRIGGER
RoHS : Not Compliant

5962-87627012A

Teledyne HiRel

FLIP-FLOP, D-TYPE, 8-BIT, WITH CLOCK ENABLE, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-87761012A

Teledyne HiRel

DATA SEL/MULTIPLEXER, DUAL 4-INPUT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-89767012A

Teledyne HiRel

BUFFER/DRIVER, OCTAL, INVERTING, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-87760012A

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, W/3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-89766012A

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, W/3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-89847012A

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, W/3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-89734012A

Teledyne HiRel

HEX INVERTER, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-87629012A

Teledyne HiRel

BUS TRANSCEIVER, 8-BIT, WITH INVERTING 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-88534012A

Teledyne HiRel

FLIP-FLOP, JK, DUAL, POSITIVE EDGE-TRIGGERED, WITH TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-89582012A

Teledyne HiRel

BINARY COUNTER, 4-BIT SYNCHRONOUS, PRESETTABLE
RoHS : Not Compliant

Venkel Ltd.

CR0201-20W-3012FT

VENKEL LTD

Chip Resistor;0201;1/20W;30.1K;�1%
RoHS : Compliant

CRS0201-20W-3012FT

VENKEL LTD

Anti-Sulfuration CR;0201;1/20W;30.1K;�1%
RoHS : Compliant

PWCR1206-UK-3012FT

VENKEL LTD

Pulse Withstanding CR;1206;1/3W;�100PPM;30.1K;�1%
RoHS : Compliant

LMCI0201-2N2BT

VENKEL LTD

Low Value Multilayer Chip Inductor;0201;2.2nH;�0.1nH
RoHS : Compliant

HPTF1206-TP-3012FT

VENKEL LTD

High Power Thin Film CR;1206;1/4W;�5PPM;30.1K;�1%
RoHS : Compliant

HPTF1210-UC-3012CT

VENKEL LTD

High Power Thin Film CR;1210;1/3W;�50PPM;30.1K;�0.25%
RoHS : Compliant

HPTF2010-UN-3012UT

VENKEL LTD

High Power Thin Film CR;2010;1/3W;�10PPM;30.1K;�0.01%
RoHS : Compliant

TFCR0201-20W-C-1960DT

VENKEL LTD

Thin Film CR;0201;1/20W;�50PPM;196R;�0.5%
RoHS : Compliant

TFCR0201-20W-C-2400DT

VENKEL LTD

Thin Film CR;0201;1/20W;�50PPM;240R;�0.5%
RoHS : Compliant

TFCR0201-20W-C-2741FT

VENKEL LTD

Thin Film CR;0201;1/20W;�50PPM;2.74K;�1%
RoHS : Compliant

TFCR0201-20W-C-3920FT

VENKEL LTD

Thin Film CR;0201;1/20W;�50PPM;392R;�1%
RoHS : Compliant

TFCR0201-20W-C-39R0DT

VENKEL LTD

Thin Film CR;0201;1/20W;�50PPM;39R;�0.5%
RoHS : Compliant

TFCR0201-20W-C-4020DT

VENKEL LTD

Thin Film CR;0201;1/20W;�50PPM;402R;�0.5%
RoHS : Compliant

TFCR0201-20W-C-45R3DT

VENKEL LTD

Thin Film CR;0201;1/20W;�50PPM;45.3R;�0.5%
RoHS : Compliant

TFCR0201-20W-C-49R9DT

VENKEL LTD

Thin Film CR;0201;1/20W;�50PPM;49.9R;�0.5%
RoHS : Compliant

Waytek, Inc.

19023-0012

Molex

16-14 GA Male Disconnect .250X.032 Insulated Blue Vinyl
RoHS : Compliant

100 : $0.1626
200 : $0.1587
500 : $0.1409
1,000 : $0.1282
5,000 : $0.1222

21,995

160-012

AFC Cable Systems Inc

Non-Metallic Electrical Tubing Black 3/8" 100 FT UL LIQUID TIGHT

100 : $0.9533
500 : $0.9005

3,000

AL-30-120-9-L

Advanced Cable Ties Inc

ACT AL-30-120-9-L light heavy-duty cable tie is a natural 30" nylon 6/6 tie with 120 lb. tensile strength and a 9" maximum bundle diameter. Rated from -40F to 185F and packaged in bags of 50, it is built to bundle and secure wire and cable in demanding applications.

50 : $0.5176
200 : $0.492
500 : $0.4599
1,000 : $0.4471

1,200

33012-3003

Molex

The Molex 33012-3003 is an MX150 1.5 mm sealed female receptacle terminal designed for low-current automotive and sealed connector applications. Compatible with 22 Ga. wire , it features an open-barrel crimp for secure conductor and insulation support. Constructed from tin-plated copper alloy, it provides reliable conductivity and corrosion resistance for use in harsh, vibration-prone environments.
RoHS : Compliant

50 : $0.1212
200 : $0.1164
500 : $0.1127
1,000 : $0.1073
5,000 : $0.103

598

C01620D00311012

Amphenol Sine Systems

Amphenol Sine Systems C01620D00311012 ecomate plastic female straight cable connector has 3+PE contacts, screw termination, and internal cable clamping. Rated 16A at 400V with IP65/IP67 sealing, it uses a black backshell and 6-12.5 mm cable range.

1 : $12.72
5 : $11.88
10 : $10.66
50 : $10.28
100 : $9.75
200 : $9.59

456

C01620C00310012

Amphenol Sine Systems

Amphenol Sine Systems C01620C00310012 ecomate plastic male receptacle has 3+PE contacts, screw termination, and silver-plated contacts. Rated 16A at 400V with IP65/IP67 sealing, it provides a panel-mount mating interface for ecomate cable connectors.

1 : $9.77
5 : $9.12
10 : $8.18
50 : $7.72
100 : $7.06
200 : $6.64

406

C01620K00310012

Amphenol Sine Systems

Amphenol Sine Systems C01620K00310012 ecomate plastic male right-angle cable connector has 3+PE contacts, screw termination, and a black backshell. Rated 16A at 400V with IP65/IP67 sealing, it accepts 0.75-2.5 mm wire and 6-12.5 mm cable.

1 : $25.2825
5 : $23.5562
10 : $21.213
50 : $19.9792
100 : $18.253
200 : $17.1425

220

70-120224S1

White-Rodgers

DC Power Contactor 36V SPNO Continuous Isolated 114 OHMS 70-120224

1 : $23.35
5 : $22.51
10 : $22.01
50 : $21.67
100 : $21.17
200 : $20.83

176

6420120CLE448

ShawCor Ltd

DSG-Canusa SpliceMelt adhesive-lined heat shrink tubing is clear tubing sized 12 mm for sealing and protecting splices, terminals, and inline connections. Its adhesive-lined construction supports moisture resistance, abrasion protection, and durable environmental insulation.

1 : $8.93
10 : $7.7
50 : $7.01
100 : $6.4
500 : $6.06

154

C01600U00000012

Amphenol Sine Systems

Amphenol Sine Systems C01600U00000012 protective cap is a plastic cover for ecomate male cable plugs. This connector accessory helps shield unmated plug interfaces from dust and handling damage and is designed for use with compatible ecomate circular connectors.

1 : $15.15
5 : $14.14
10 : $12.68
50 : $11.95
100 : $10.94
200 : $10.29

HDBB-230-1-250

3M HDBB-230-1-250 heat shrinkable cable breakout boot is a 2-way molded heat shrink shape for multiconductor armored or sheathed cables. It provides electrical and mechanical protection, uses adhesive-sealed polyolefin construction, and has 3.00"/1.50" outlet dimensions for larger cable breakouts.

1 : $108.69
5 : $101.94
10 : $95.8
25 : $90.88
50 : $87.81

815-3012

Xantrex Technology Inc

Xantrex Freedom SW 3000 Inverter / Charger

1 : $2,503.516
5 : $2,454.1045
10 : $2,421.1636
25 : $2,388.2224
50 : $2,338.811

HDBB-320-1-250

3M HDBB-320-1-250 heat shrinkable cable breakout boot is a 3-way molded heat shrink shape for multiconductor armored or sheathed cables. It provides electrical and mechanical protection, uses adhesive-sealed polyolefin construction, and has 1.20"/0.50" outlet dimensions for compact breakout sealing.

1 : $42.02
5 : $40.47
10 : $39.17
20 : $37.09
50 : $35.8
100 : $34.75

AT62-20-0122

Amphenol Sine Systems

ATM Female Reel Socket Contact 22-16GA Size 20 S&F 4000/Reel 1062-20-0122

4,000 : $0.2162
20,000 : $0.1938

33012-3001

Molex

Socket Terminal 14-16GA 5000/Reel 33012-3001 D Wind
RoHS : Compliant

5,000 : $0.0671
25,000 : $0.0619

Win Source Electronics

UPZ2012E601-2R0TF

Sunlord

RoHS : Compliant

5,640 : $0.0532
4,220 : $0.0593
3,265 : $0.0613
2,370 : $0.0634
1,530 : $0.0654
630 : $0.0797

908,000

MPZ2012S101AT000

TDK Corporation

FERRITE BEAD 100 OHM 0805 1LN / Ferrite Beads Multi-Layer Power 100Ohm 25% 100MHz 4A 0.02Ohm DCR 0805 T/R
RoHS : Compliant

18,295 : $0.0164
14,620 : $0.0171
11,240 : $0.0178
7,855 : $0.0191
5,055 : $0.0198
2,370 : $0.0211

446,630

SP3012-04UTG-1

Littelfuse Inc

1,945 : $0.1997
1,560 : $0.2079
1,200 : $0.2162
835 : $0.2328
540 : $0.2411
255 : $0.2577

390,610

SI1012R

Vishay Huntington

N-Channel 1.8-V (G-S) MOSFET

1,620 : $0.208
1,210 : $0.232
935 : $0.24
680 : $0.248
440 : $0.256
180 : $0.3119

381,000

ACM2012-201-2P-T002

TDK Corporation

CMC 350MA 2LN 200 OHM SMD
RoHS : Compliant

5,115 : $0.0587
3,820 : $0.0655
2,955 : $0.0677
2,145 : $0.07
1,390 : $0.0722
570 : $0.088

118,000

C2012X5R1A476MTJ00E

TDK Corporation

Multilayer Ceramic Chip Capacitors

1,795 : $0.1675
1,340 : $0.1868
1,040 : $0.1932
755 : $0.1997
490 : $0.2061
200 : $0.2512

86,008

FSMD050-1206-R

Fuzetec Technology Co Ltd

RESETTABLE FUSE - SMD, 1206 SIZE
RoHS : Compliant

8,800 : $0.0341
6,565 : $0.0381
5,080 : $0.0394
3,690 : $0.0407
2,385 : $0.042
980 : $0.0512

48,000

C2012X5R1C226K125AC

TDK Corporation

CAP CER 22UF 16V X5R 0805
RoHS : Compliant

1,525 : $0.197
1,140 : $0.2197
880 : $0.2273
640 : $0.2349
415 : $0.2425
170 : $0.2955

40,000

BU52012HFV-TR

ROHM Semiconductor

MAGNETIC SWITCH UNIPOLAR HVSOF5
RoHS : Compliant

1,570 : $0.2473
1,175 : $0.2757
910 : $0.2853
660 : $0.2949
430 : $0.3043
175 : $0.3707

35,100

PDAB050120-SOD882

Others

54,550 : $0.0062
40,325 : $0.0069
31,250 : $0.0072
22,730 : $0.0074
14,710 : $0.0076
6,025 : $0.0093

30,000

MLF2012DR22JT000

TDK Corporation

FIXED IND 220NH 250MA 300 MOHM
RoHS : Compliant

7,675 : $0.0391
5,725 : $0.0437
4,425 : $0.0452
3,215 : $0.0467
2,075 : $0.0482
855 : $0.0587

16,000

AXT530124

Panasonic Electronic Components

CONN SOCKET F4S .4MM 30POS SMD
RoHS : Compliant

1,400 : $0.2149
1,045 : $0.2397
810 : $0.2479
590 : $0.2562
380 : $0.2644
160 : $0.3223

15,000

0215012.MXEP

Littelfuse Inc

215 Series, 5 x 20 mm, Time-Lag (Slo-Blo®) Fuse | FUSE CERAMIC 12A 250VAC 5X20MM
RoHS : Compliant

1,750 : $0.1717
1,305 : $0.1916
1,010 : $0.1982
735 : $0.2048
475 : $0.2114
195 : $0.2576

12,000

RZ03-1C4-D012

TE Connectivity

RELAY GEN PURPOSE SPDT 16A 12V / General Purpose Relay SPDT (1 Form C) 12VDC Coil Through Hole
RoHS : Compliant

131 : $2.2949
98 : $2.5597
76 : $2.648
55 : $2.7362
36 : $2.8245
15 : $3.4424

10,000

STF201-22.TCT

Semtech Corporation

USB Downstream Port Filter & TVS
RoHS : Compliant

770 : $0.391
575 : $0.4361
445 : $0.4512
325 : $0.4662
210 : $0.4813
90 : $0.5865

2,647

Wuhan P&S

VS-E5PH6012L-N3

Vishay Intertechnologies

Hyperfast Rectifier, 60A,1200V
RoHS : Compliant

1 : $7.72
100 : $2.58
500 : $2.38
1,000 : $2.32

89,000

VS-E5PH3012L-N3

Vishay Intertechnologies

Hyperfast Rectifier, 30A FRED Pt G5
RoHS : Compliant

1 : $5.65
100 : $1.89
500 : $1.75
1,000 : $1.7

31,825

10122655-101LF

Amphenol FCi

10Row,120P,2mm,Right Angle Receptacle
RoHS : Compliant

1 : $17.27
100 : $16.69
500 : $16.3
1,000 : $16.01

31,320

NLV14012BDR2G

onsemi

RoHS : Compliant

1 : $0.46
100 : $0.3
500 : $0.24
1,000 : $0.23

17,500

10127850-001LF

Amphenol FCi

Headers & Wire Housings,IDC Terminal,SMT
RoHS : Compliant

1 : $0.23
100 : $0.22
500 : $0.21
1,000 : $0.21

15,000

NTH4L012N065M3S

onsemi

SIC MOS TO247-4L 12MOHM 6
RoHS : Compliant

1 : $28.59
100 : $18.25
500 : $15.05
1,000 : $13.84

10,350

10124620-4444P00LF

Amphenol FCi

AirMax Power Connectors, Power Solutions, 2-Pair, 2 Column, 12-Position, Right Angle Receptacle, Press-Fit
RoHS : Compliant

1 : $5.65
100 : $2.26
500 : $2.09
1,000 : $2.04

STBR6012W

STMicroelectronics

-
RoHS : Compliant

1 : $15.4
100 : $5.14
500 : $4.75
1,000 : $4.62

NOIX1SE012KBLFB-GEVB

onsemi

1 : $2,265.8
100 : $1,446.26
500 : $1,192.53
1,000 : $1,096.36

NOIX1SN012KBLFB-GEVB

onsemi

1 : $2,265.8
100 : $1,446.26
500 : $1,192.53
1,000 : $1,096.36

012BL-S08-R sprzedawcę

Link URL