| Zakładka z wyszukiwarką danych komponentów |
|
019L-55-R16-R sprzedawcę |
| sprzedawcę | Numer części | Producent | Szczegółowy opis | Price | Qty. BuyNow | |
![]() Avnet Americas | SQM100P10-19L_GE3 | Vishay Intertechnologies | - Tape and Reel (Alt: SQM100P10-19L_GE3) RoHS : Not Compliant |
| 3,200 | |
| SUM90P10-19L-E3 | Vishay Intertechnologies | Power MOSFET, P Channel, 100 V, 90 A, 19 MilliOhms, TO-263 (D2PAK), 3 Pins, Surface Mount - Tape and Reel (Alt: SUM90P10-19L-E3) RoHS : Compliant |
| 3,200 | ||
| TSW-120-19-L-D | Samtec Inc | Pin Header, Board-to-Board, 2.54 mm, 2 Rows, 40 Contacts, Through Hole, TSW Series - Bulk (Alt: TSW-120-19-L-D) RoHS : Compliant |
| 0 | ||
| DW-10-19-L-D-910 | Samtec Inc | - Bulk (Alt: DW-10-19-L-D-910) RoHS : Compliant |
| 0 | ||
| HTSW-150-19-L-S | Samtec Inc | Pin Header, Board-to-Board, Wire-to-Board, 2.54 mm, 1 Rows, 50 Contacts, Through Hole, HTSW Series - Bulk (Alt: HTSW-150-19-L-S) RoHS : Compliant |
| 0 | ||
PE2512FKF7W0R019L![]() | YAGEO Corporation | SMD Current Sense Resistor, 0.019 ohm, PE Series, 2 W, ? 1%, ? 100ppm/?C, 6.35 mm, 3.18 mm, 0.64 mm - Tape and Reel (Alt: PE2512FKF7W0R019L) RoHS : Compliant |
| 0 | ||
| HTSW-210-19-L-D | Samtec Inc | HIGH TEMPERATURE PCB HEADER STRIPS - Bulk (Alt: HTSW-210-19-L-D) RoHS : Compliant |
| 0 | ||
| 66429-019LF | Amphenol Corporation | - Trays (Alt: 66429-019LF) RoHS : Compliant |
| 0 | ||
| 4310-019LF | CTS Corporation | - Bulk (Alt: 4310-019LF) RoHS : Compliant |
| 0 | ||
| DW-20-19-L-D-900-LL | Samtec Inc | - Bulk (Alt: DW-20-19-L-D-900-LL) RoHS : Compliant |
| 0 | ||
| DW-30-19-L-D-900-LL | Samtec Inc | - Bulk (Alt: DW-30-19-L-D-900-LL) RoHS : Compliant |
| 0 | ||
| DW-10-19-L-D-1025 | Samtec Inc | Board Stackers & Spacers, Pin Header, 26.04 mm, 20 Contacts, Solder, 2 Rows, 2.54 mm, DW Series - Bulk (Alt: DW-10-19-L-D-1025) RoHS : Compliant |
| 0 | ||
| DW-50-19-L-S-1004 | Samtec Inc | - Bulk (Alt: DW-50-19-L-S-1004) RoHS : Compliant |
| 0 | ||
| 51952-019LF | Amphenol Corporation | - Trays (Alt: 51952-019LF) RoHS : Compliant |
| 0 | ||
| MDM-37SH019L | ITT Interconnect Solutions | - Bulk (Alt: MDM-37SH019L) RoHS : Not Compliant | 0 | |||
![]() Newark | HW-10-19-L-D-650-120 | Samtec Inc | Conn Stack Brd, 2.54Mm, 20Pos, Hdr; |Samtec, Inc. HW-10-19-L-D-650-120 RoHS : Compliant |
| 280 | |
| DW-10-19-L-D-787 | Samtec Inc | Conn Stack Brd, 2.54Mm, 20Pos, Hdr; |Samtec, Inc. DW-10-19-L-D-787 RoHS : Compliant |
| 272 | ||
| TSW-120-19-L-D | Samtec Inc | Header, 2.54Mm, Tht Vert, 40Way; |Samtec, Inc. TSW-120-19-L-D RoHS : Compliant |
| 191 | ||
| SSQ-123-01-S-S-019-LL | Samtec Inc | Rcpt, Pcb, Brd-To-Brd, 2.54Mm, 1Rows; |Samtec, Inc. SSQ-123-01-S-S-019-LL RoHS : Compliant |
| 188 | ||
| DW-10-19-L-D-938 | Samtec Inc | Conn Stack Brd, 2.54Mm, 20Pos, Hdr; |Samtec, Inc. DW-10-19-L-D-938 RoHS : Compliant |
| 167 | ||
| DW-10-19-L-D-800 | Samtec Inc | Conn Stack Brd, 2.54Mm, 20Pos, Hdr; |Samtec, Inc. DW-10-19-L-D-800 RoHS : Compliant |
| 167 | ||
| DW-10-19-L-D-1036 | Samtec Inc | Conn Stack Brd, 2.54Mm, 20Pos, Hdr; |Samtec, Inc. DW-10-19-L-D-1036 RoHS : Compliant |
| 167 | ||
| HTSW-150-19-L-S | Samtec Inc | Header, 2.54Mm, Tht Vert, 50Way; |Samtec, Inc. HTSW-150-19-L-S RoHS : Compliant |
| 117 | ||
| EW-20-19-L-D-790 | Samtec Inc | Conn Stack Brd, 2.54Mm, 40Pos, Hdr; |Samtec, Inc. EW-20-19-L-D-790 RoHS : Compliant |
| 110 | ||
| DW-50-19-L-S-1004 | Samtec Inc | Conn Stack Brd, 2.54Mm, 50Pos, Hdr; |Samtec, Inc. DW-50-19-L-S-1004 RoHS : Compliant |
| 77 | ||
| DW-20-19-L-D-900-LL | Samtec Inc | Conn Stack Brd, 2.54Mm, 40Pos, Hdr; |Samtec, Inc. DW-20-19-L-D-900-LL RoHS : Compliant |
| 76 | ||
| DW-40-19-L-D-650 | Samtec Inc | Conn Stack Brd, 2.54Mm, 80Pos, Hdr; |Samtec, Inc. DW-40-19-L-D-650 RoHS : Compliant |
| 56 | ||
| EW-30-19-L-D-900 | Samtec Inc | Conn Stack Brd, 2.54Mm, 60Pos, Hdr; |Samtec, Inc. EW-30-19-L-D-900 RoHS : Compliant |
| 45 | ||
| DW-30-19-L-D-900-LL | Samtec Inc | Conn Stack Brd, 2.54Mm, 60Pos, Hdr; |Samtec, Inc. DW-30-19-L-D-900-LL RoHS : Compliant |
| 43 | ||
| EW-30-19-L-D-800-LL | Samtec Inc | Conn Stack Brd, 2.54Mm, 60Pos, Hdr; |Samtec, Inc. EW-30-19-L-D-800-LL RoHS : Compliant |
| 43 | ||
![]() RS | PB04019L | Maple Systems Inc | LEGEND PLATE FRAME WITH LABEL - ON / OFF / ON |
| 0 | |
| 66527019LF | Amphenol FCi | GUIDE PIN CARD CONNECTOR |
| 0 | ||
| 66956019LF | Amphenol FCi | VERT CARD CONN D/R .100C-C 30AU |
| 0 | ||
| 86805019LF | Amphenol FCi | MINI ROD HSG DR POL. W/R-ODS |
| 0 | ||
| 65406019LF | Amphenol FCi | MINI LATCH HSG .100CC SR |
| 0 | ||
| 66506019LF | Amphenol FCi | QKE HDR-66506-019LF |
| 0 | ||
| 66951019LF | Amphenol FCi | VERT CARD CONN S/R 30AU.-100CC |
| 0 | ||
| 65692019LF | Amphenol FCi | 65692-019LF-QKE HDR |
| 0 | ||
M2019LL1W03![]() | NKK Switches | SWITCH, TOGGLE, SPDT, ON-OFF-(ON),.201 LOCKING LEVER,6A,125VAC,.250 STRAIGHT PC RoHS : Not Compliant |
| 0 | ||
| 66429-019LF | Amphenol FCi | QKE HDR-66429-019LF RoHS : Compliant |
| 0 | ||
| 51952-019LF | Amphenol FCi | PWRBLADE VH-51952-019LF RoHS : Compliant |
| 0 | ||
| 54202G3019LF | Amphenol FCi | CONNECTOR, BERGSTIK 0.10-SMT, DOUBLE ROW,30 GOLD |
| 0 | ||
| M2019LL2W13/U | NKK Switches | SWITCH, TOGGLE, SPDT, ON-OFF-(ON),.201 LOCKING LEVER,6A,125VAC,.250 STRAIGHT PC |
| 0 | ||
| 1014760600019LF | Amphenol FCi | MINITEK1.0 R/A SMT HDR-10147606-00019LF |
| 0 | ||
| 10119109226019LF | Amphenol FCi | BS II DR STR |
| 0 | ||
![]() Microchip Technology Inc | M83536/9-019L | Microchip Technology Inc | 2PDT 10 AMP RELAY QPL BR246-320C1-28V-019L, Projected EOL: 2051-08-17 - Contact for Pricing | 0 | ||
| M83536/15-019L | Microchip Technology Inc | 4PDT 10 AMP RELAY QPL BR230-290A1-28V-019L, Projected EOL: 2051-08-17 - Contact for Pricing | 0 | |||
| M83536/16-019L | Microchip Technology Inc | 4PDT 10 AMP SUPRESSED RELAY QPL BR230D-290A1-28V-019L, Projected EOL: 2051-08-17 - Contact for Pricing | 0 | |||
| M83536/10-019L | Microchip Technology Inc | 2PDT 10 AMP SUPRESSED RELAY QPL BR246D-320C1-28V-019L, Projected EOL: 2051-08-17 - Contact for Pricing | 0 | |||
| BR246-320C1-28V-019L | Microchip Technology Inc | 2PDT 10 AMP RELAY QPL M83536/9-019L, Projected EOL: 2051-08-17 RoHS : Compliant |
| 0 | ||
| BR230-290A1-28V-019L | Microchip Technology Inc | 4PDT 10 AMP RELAY QPL M83536/15-019L, Projected EOL: 2051-08-17 RoHS : Compliant |
| 0 | ||
| BR230D-290A1-28V-019L | Microchip Technology Inc | 4PDT 10 AMP SUPRESSED RELAY QPL M83536/16-019L, Projected EOL: 2051-08-17 RoHS : Compliant |
| 0 | ||
| BR246D-320C1-28V-019L | Microchip Technology Inc | 2PDT 10 AMP SUPRESSED RELAY QPL M83536/10-019L, Projected EOL: 2051-08-17 RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | NBXHBA019LN1TAG | onsemi | Clock Generator, 125MHz, CMOS, CDSO6 RoHS : Compliant |
| 5,471 | |
| LV8019LP-TLM-E | onsemi | Motion Control Electronic, BICMOS, PQCC24 RoHS : Compliant |
| 38,000 | ||
| NBXDBA019LN1TAG | onsemi | Clock Generator, 125MHz, CMOS, CDSO6 RoHS : Compliant |
| 7,293 | ||
| LV8019LP-TLM-E | SANYO Semiconductor Co Ltd | Motion Control Electronic, BICMOS, PQCC24 RoHS : Compliant |
| 26,000 | ||
![]() Sager | HTSW-210-19-L-D | Samtec Inc | HIGH TEMPERATURE PCB HEADER STRIPS, 0.100 PITCH RoHS : Compliant |
| 135 | |
| HTSW-150-19-L-S | Samtec Inc | Headers & Wire Housings High Temperature PCB Header Strips, 0.100 pitch RoHS : Compliant |
| 117 | ||
| HTSW-140-19-L-D | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| DW-10-19-L-D-980 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| ZW-20-19-L-D-865-190 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TSW-110-19-L-S-LL | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| TSW-140-19-L-T-LL | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| TSW-150-19-L-T | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| TSW-210-19-L-Q | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| HW-10-19-L-D-800-140 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| LCW-110-19-L-S-300-PR | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| LCW-130-19-L-M-230-RR | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| HTSW-150-19-L-T-LL | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| HW-10-19-L-D-1040-175-LL | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| HW-50-19-L-D-800-100 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
![]() TME | 65461-019LF | Amphenol Corporation | PIN: 10; Plating: gold-plated |
| 1,769 | |
| SQM100P10-19L_GE3 | Vishay Intertechnologies | Transistor: P-MOSFET; unipolar; -100V; -53A; 125W; D2PAK,TO263 RoHS : Compliant |
| 787 | ||
| 65801-019LF | Amphenol Corporation | Connector: FFC/FPC; data; tinned; 2A; PIN: 19; vertical; -65÷105°C |
| 768 | ||
| 10073456-019LF | Amphenol Corporation | Connector: IDC; male; data; PIN: 20; Quickie; straight; 3A; THT |
| 485 | ||
| 10121067-1019LF | Amphenol Corporation | Connector: DIN 41612; data |
| 315 | ||
| SUM90P10-19L-E3 | Vishay Intertechnologies | Transistor: P-MOSFET; TrenchFET®; unipolar; -100V; -90A; Idm: -90A RoHS : Compliant |
| 212 | ||
| 65240-019LF | Amphenol Corporation | Connector: wire-board; female; data; PIN: 19; straight; crimped |
| 100 | ||
| 10128419-1019LF | Amphenol Corporation | Connector: DIN 41612; data; PIN: 112; angled; Press-Fit |
| 84 | ||
| GEN-40-19/LN | TDK-Lambda Corporation | Laboratory power supply: programmable; single-channel; 0÷40VDC |
| 2 | ||
| GN20019L | Lovato Electric Inc | Switch: cam switch Dahlander; Stabl.pos: 3; 200A; 0-1-2; Pos: 3 |
| 0 | ||
| GENH-40-19/LN | TDK-Lambda Corporation | Laboratory power supply: programmable; single-channel; 0÷40VDC |
| 0 | ||
| GENH40-19-LAN/LN | TDK-Lambda Corporation | Laboratory power supply: programmable; single-channel; 0÷40VDC |
| 0 | ||
![]() ComSIT USA | VP8019LF | lb | Electronic Component RoHS : Not Compliant | 345 | ||
| SUM90F1019LE3 | Vishay Intertechnologies | Electronic Component RoHS : Compliant | 275 | |||
![]() Interstate Connecting Components | M83536/2-019L | TE Connectivity | Mid Range FCB-205 FCB-205-0219L=M83536/2-019L RoHS : Not Compliant |
| 11 | |
| 449AN001NF1207-01-9L | Glenair Inc | BANDING CRIMP ADAPTER | 0 | |||
| 449AS001NF1611-01-9L | Glenair Inc | BANDING CRIMP ADAPTER | 0 | |||
| 449AN001NF1409-01-9L | Glenair Inc | BANDING CRIMP ADAPTER | 0 | |||
| 449AS001NF2212-01-9L | Glenair Inc | BANDING CRIMP ADAPTER | 0 | |||
| 66429-019LF | Amphenol FCi | QKE HDR-66429-019LF RoHS : Compliant | 0 | |||
| 449AM001NF2014-01-9L | Glenair Inc | BANDING CRIMP ADAPTER | 0 | |||
| 449FS001NF1607-01-9L | Glenair Inc | BANDING CRIMP ADAPTER | 0 | |||
| 51952-019LF | Amphenol FCi | PWRBLADE VERT LF HDR RoHS : Compliant |
| 0 | ||
| 449AM001NF1207-01-9L | Glenair Inc | BANDING CRIMP ADAPTER | 0 | |||
| 66987-019LF | Amphenol FCi | DUFLEX HSNG DR .100-66987-019L RoHS : Compliant | 0 | |||
| 65801-019LF | Amphenol FCi | CLINCHER RECEPT ASSY, TIN RoHS : Compliant |
| 0 | ||
| 449AS001NF2216-01-9L | Glenair Inc | BANDING CRIMP ADAPTER | 0 | |||
| 449AN001NF1407-01-9L | Glenair Inc | BANDING CRIMP ADAPTER | 0 | |||
| 449AS001NF2418-01-9L | Glenair Inc | BANDING CRIMP ADAPTER | 0 | |||
![]() PEI Genesis | MDM-21PH019L-A174 | ITT Interconnect Solutions |
| 0 | ||
| MDM-15PH019L-A174-F222 | ITT Interconnect Solutions |
| 0 | |||
| MDM-100PH019L-F222 | ITT Interconnect Solutions |
| 0 | |||
| MDM-21SH019L-A174 | ITT Interconnect Solutions |
| 0 | |||
| MDM-31PH019L | ITT Interconnect Solutions |
| 0 | |||
| MDM-25SH019L-F222 | ITT Interconnect Solutions |
| 0 | |||
| MDM-31PH019L-A174-F222 | ITT Interconnect Solutions |
| 0 | |||
| MDM-15SH019L | ITT Interconnect Solutions |
| 0 | |||
| MDM-21SH019L-A174-F222 | ITT Interconnect Solutions |
| 0 | |||
| MDM-37SH019L-A174 | ITT Interconnect Solutions |
| 0 | |||
| MDM-21SH019L-F222 | ITT Interconnect Solutions |
| 0 | |||
| MDM-25PH019L-A174 | ITT Interconnect Solutions |
| 0 | |||
| MDM-31SH019L-A174 | ITT Interconnect Solutions |
| 0 | |||
| MDM-37SH019L | ITT Interconnect Solutions |
| 0 | |||
| MDM-51PH019L-A174-F222 | ITT Interconnect Solutions |
| 0 | |||
![]() Chip 1 Exchange | SUM90P10-19L-E3 | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 8,538 | ||
| SUM90P1019LE3 | INSTOCK | 3,829 | ||||
| VP8019LF | Bothhand Usa | INSTOCK | 2 | |||
![]() Avnet Abacus | 863019LF | Amphenol Corporation | Connector Accessories Hood Steel Zinc Finish (Alt: 863019LF) RoHS : Compliant | 0 | ||
| 4310-019LF | CTS Corporation | EMI Filter 5000pF 150VDC Axial ThruHole (Alt: 4310-019LF) RoHS : Compliant | 0 | |||
| NTG04-019L | YAGEO Corporation | (Alt: NTG04-019L) RoHS : Compliant | 0 | |||
| 4306-019LF | CTS Corporation | (Alt: 4306-019LF) RoHS : Compliant | 0 | |||
| NTE03-019L | YAGEO Corporation | (Alt: NTE03-019L) RoHS : Compliant | 0 | |||
| 66987-019LF | Amphenol Corporation | Conn Housing PL 38 POS 254mm Crimp ST Cable Mount (Alt: 66987-019LF) RoHS : Compliant | 0 | |||
| 65801-019LF | Amphenol Corporation | Conn Clincher RCP 19 POS 254mm IDT ST Cable Mount Tray (Alt: 65801-019LF) RoHS : Compliant | 0 | |||
| 66506-019LF | Amphenol Corporation | Conn Shrouded Header HDR 34 POS 254mm Solder ST ThruHole Tray (Alt: 66506-019LF) RoHS : Compliant | 0 | |||
| 65039-019LF | Amphenol Corporation | Conn Housing RCP 18 POS 254mm Crimp ST Cable Mount Bag (Alt: 65039-019LF) RoHS : Compliant | 0 | |||
| NTE03-019LF | YAGEO Corporation | Thermistor ICL NTC 19 Ohm 10 mm 3 A NT (Alt: NTE03-019LF) RoHS : Compliant | 0 | |||
| 65846-019LF | Amphenol Corporation | Connector Housing FCI MiniPV 65846 Receptacle 26 Ways 254 mm (Alt: 65846-019LF) RoHS : Compliant | 0 | |||
| 10073456-019LF | Amphenol Corporation | Pin Header WiretoBoard 254 mm 2 Rows 20 Contacts Press Fit Quickie 10073456 Series (Alt: 10073456-019LF) RoHS : Compliant | 0 | |||
| HTSW-150-19-L-S | Samtec Inc | Pin Header BoardtoBoard WiretoBoard 254 mm 1 Rows 50 Contacts Through Hole HTSW Series (Alt: HTSW-150-19-L-S) RoHS : Compliant | 0 | |||
| DW-10-19-L-D-787 | Samtec Inc | Stacking Board Connector DW Series 20 Contacts Header 254 mm Through Hole 2 Rows (Alt: DW-10-19-L-D-787) RoHS : Compliant | 0 | |||
| DW-20-19-L-D-790 | Samtec Inc | Stacking Board Connector DW Series 40 Contacts Header 254 mm Through Hole 2 Rows (Alt: DW-20-19-L-D-790) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 10188768-1019LF | Amphenol Corporation | HSBP,EXAMAX2 RAR 8*8 WITH SLOT CONTACT (Alt: 10188768-1019LF) RoHS : Compliant | 0 | ||
| 10188767-1019LF | Amphenol Corporation | HSBP,EXAMAX2 RAOH 8*8 WITH CRUSH RIB (Alt: 10188767-1019LF) RoHS : Compliant | 0 | |||
| 10046971-019LF | Amphenol Corporation | (Alt: 10046971-019LF) RoHS : Compliant |
| 0 | ||
| 10170425-1SF019LF | Amphenol Corporation | (Alt: 10170425-1SF019LF) RoHS : Compliant | 0 | |||
| 10186538-066F019LF | Amphenol Corporation | (Alt: 10186538-066F019LF) RoHS : Compliant | 0 | |||
![]() Avnet Silica | DMP2019LFK-7 | Diodes Incorporated | (Alt: DMP2019LFK-7) RoHS : Compliant | 0 | ||
![]() Component Electronics, Inc | TSW-150-19-L-S | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 890 | |
| EW-30-19-L-D-800-LL | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 125 | ||
| 019L5 | General Instrument | IN STOCK SHIP TODAY | 80 | |||
| HW-50-19-L-D-800-140 | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 70 | ||
![]() EBV Elektronik | SUM90P10-19L-E3 | Vishay Intertechnologies | Power MOSFET P Channel 100 V 90 A 19 MilliOhms TO263 D2PAK 3 Pins Surface Mount (Alt: SUM90P10-19L-E3) RoHS : Compliant | 26,400 | ||
| SQM100P10-19L_GE3 | Vishay Intertechnologies | (Alt: SQM100P10-19L_GE3) RoHS : Compliant | 0 | |||
![]() Master Electronics | HTSW-130-19-LM-Q-LL | Samtec Inc | RoHS : Compliant |
| 0 | |
| HTSW-140-19-L-D | Samtec Inc | .100 High-Temp Terminal Strip RoHS : Compliant |
| 0 | ||
| HTSW-150-19-L-S | Samtec Inc | .100 High-Temp Terminal Strip RoHS : Compliant |
| 0 | ||
| HW-10-19-L-D-400-120 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-10-19-L-D-935 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-10-19-L-D-980 | Samtec Inc | .100 Flex Stack Flexible Board Stacker .110 Tail RoHS : Compliant |
| 0 | ||
| DW-20-19-L-D-905 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-20-19-L-T-765 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-30-19-L-D-920 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-30-19-L-T-780 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-50-19-L-S-875 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| BR246-320C1-28V-019L | Microchip Technology Inc | 2PDT 10 AMP RELAY QPL M83536/9-019L RoHS : Compliant |
| 0 | ||
| ZW-10-19-L-D-915-100 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| ZW-20-19-L-D-865-190 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TSW-110-19-L-S-LL | Samtec Inc | Pin Header Board-to-Board 2.54 mm 1 Rows 10 Contacts Through Hole TSW Series RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W03019LF/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. N Male to N Female Low Loss Cable Using LMR-240-UF Coax with HeatShrink, LF Solder., Radio frequency assembly N male to N female low loss cable using LMR-240-UF coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N female low loss cable using LMR-240-UF coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a female on end 2. PE3W03019LF/HS can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03019LF/HS RF cable has a TPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3W03019LF/HS is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03019LF/HS can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 4,610 | ||
| PE3W03019LF/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male to N Female Low Loss Cable 12 Inch Length Using LMR-240-UF Coax with HeatShrink, LF Solder., Radio frequency assembly N male to N female low loss cable 12 inch length using LMR-240-UF coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N female low loss cable 12 inch length using LMR-240-UF coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a female on end 2. PE3W03019LF/HS-12 can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03019LF/HS-12 RF cable has a TPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3W03019LF/HS-12 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03019LF/HS-12 can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 922 | ||
| PE3W03019LF/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to N Female Low Loss Cable 60 Inch Length Using LMR-240-UF Coax with HeatShrink, LF Solder., Radio frequency assembly N male to N female low loss cable 60 inch length using LMR-240-UF coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N female low loss cable 60 inch length using LMR-240-UF coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a female on end 2. PE3W03019LF/HS-60 can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03019LF/HS-60 RF cable has a TPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3W03019LF/HS-60 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03019LF/HS-60 can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 922 | ||
| PE3W03019LF/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male to N Female Low Loss Cable 36 Inch Length Using LMR-240-UF Coax with HeatShrink, LF Solder., Radio frequency assembly N male to N female low loss cable 36 inch length using LMR-240-UF coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N female low loss cable 36 inch length using LMR-240-UF coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a female on end 2. PE3W03019LF/HS-36 can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03019LF/HS-36 RF cable has a TPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3W03019LF/HS-36 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03019LF/HS-36 can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 922 | ||
| PE3C2019LF | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.0/2.3, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. 1.0/2.3 Plug to BNC Male Cable Using RG316 Coax, LF Solder. PE3C2019LF is a 1.0/2.3 plug to BNC male cable using RG316 coax. This Pasternack 1.0/2.3 plug to BNC male cable assembly uses a 50 Ohm 1.0/2.3 for connector 1 and a 50 Ohm BNC for connector 2. Our plug 1.0/2.3 to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2019LF 1.0/2.3 plug to BNC male cable assembly is constructed with RG316 coax. | 0 | |||
| PE3W02019LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Male Cable Using LMR-400 Coax with HeatShrink, LF Solder. PE3W02019LF/HS is a N male right angle to N male cable using LMR-400 coax. This Pasternack N male right angle to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02019LF/HS N male right angle to N male cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W23019LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. N Male to N Female Bulkhead Cable Using RG400 Coax, LF Solder. PE3W23019LF is a N male to N female bulkhead cable using RG400 coax. This Pasternack N male to N female bulkhead cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W23019LF N male to N female bulkhead cable assembly is constructed with RG400 coax. | 0 | |||
| PE3W16019LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SHV, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Banana, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. SHV Jack to Banana Plug Cable Using RG142 Coax with HeatShrink, LF Solder. PE3W16019LF/HS is a SHV jack to Banana plug cable using RG142 coax. This Pasternack SHV jack to Banana plug cable assembly uses a 50 Ohm SHV for connector 1 and a Banana for connector 2. Our jack SHV to plug Banana cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16019LF/HS SHV jack to Banana plug cable assembly is constructed with RG142 coax. | 0 | |||
| PE37019LF | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50 Ohm. MCX Plug to SMA Male Cable Using RG196 Coax, LF Solder., Radio frequency assembly MCX plug to SMA male cable using RG196 coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MCX plug to SMA male cable using RG196 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MCX to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MCX cable connection on one end and SMA cable connection on the other. Our MCX to SMA cable assemblies have a plug gender on end 1 and male on end 2. This MCX to SMA cable is a plug to male coax assembly, PE37019LF, can also be known as a MCX male to SMA plug cable assembly and will be shipped same-day as it is purchased. MCX male to SMA plug cable assembly PE37019LF is built with RG196 which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency MCX plug to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE37019LF can also be used in the other direction and will be SMA male to MCX plug cable assembly if the opposite connectivity is required. MCX male to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MCX to SMA cable assembly for quick shipment worldwide. Variations of MCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MCX plug to SMA male cable using RG196 coax, LF solder. | 0 | |||
| PE3W10019LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-500, RF Cable Type: SPO-500, RF Cable Impedance: 50 Ohm. N Male to N Male Cable Using SPO-500 Coax, LF Solder. PE3W10019LF is a N male to N male cable using SPO-500 coax. This Pasternack N male to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to male N cable assembly uses a corrugated cable type that is 50 Ohm. Pasternack PE3W10019LF N male to N male cable assembly is constructed with SPO-500 coax. | 0 | |||
| PE3W14019LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-DB, RF Cable Type: LMR-400-DB, RF Cable Impedance: 50 Ohm. N Male to SMA Male Cable Using LMR-400-DB Coax with HeatShrink, LF Solder. PE3W14019LF/HS is a N male to SMA male cable using LMR-400-DB coax. This Pasternack N male to SMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our male N to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14019LF/HS N male to SMA male cable assembly is constructed with LMR-400-DB coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W16019LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SHV, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Banana, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. SHV Jack to Banana Plug Cable Using RG142 Coax, LF Solder. PE3W16019LF is a SHV jack to Banana plug cable using RG142 coax. This Pasternack SHV jack to Banana plug cable assembly uses a 50 Ohm SHV for connector 1 and a Banana for connector 2. Our jack SHV to plug Banana cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16019LF SHV jack to Banana plug cable assembly is constructed with RG142 coax. | 0 | |||
| PE3W05019LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. N Male to SMA Male Cable Using RG174 Coax with HeatShrink, LF Solder, RoHS. PE3W05019LF/HS is a N male to SMA male cable using RG174 coax. This Pasternack N male to SMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our male N to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W05019LF/HS N male to SMA male cable assembly is constructed with RG174 coax. | 0 | |||
| PE3C0019LF | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. TNC Female to TNC Female Cable Using RG316 Coax, LF Solder. PE3C0019LF is a TNC female to TNC female cable using RG316 coax. This Pasternack TNC female to TNC female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our female TNC to female TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C0019LF TNC female to TNC female cable assembly is constructed with RG316 coax. | 0 | |||
| PE3W03019LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. N Male to N Female Cable Using LMR-240-UF Coax, LF Solder. PE3W03019LF is a N male to N female cable using LMR-240-UF coax. This Pasternack N male to N female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03019LF N male to N female cable assembly is constructed with LMR-240-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
![]() Vyrian | NBVSPA019LN1TAG | onsemi | LVDS Output Clock Oscillator, 60MHz Min, 700MHz Max, 125MHz Nom RoHS : Compliant | 13,384 | ||
| NBXSBA019LN1TAG | onsemi | Clock Generator, 250MHz, CMOS, CDSO6 RoHS : Compliant | 10,808 | |||
| NBXHGA019LN1TAG | onsemi | Clock Generator, 125MHz, CMOS, CDSO6 RoHS : Compliant | 10,071 | |||
| EVAL01-HMC1019LP4E | Analog Devices Inc | Development kits/Accessories RoHS : Compliant | 9,992 | |||
| NBXDPA019LN1TAG | onsemi | LVDS Output Clock Oscillator, 125MHz Nom RoHS : Compliant | 9,628 | |||
| NBXHGA019LNHTAG | onsemi | Clock Generator, 125MHz, CMOS, CDSO6 RoHS : Compliant | 8,627 | |||
| HMC1019LP4ETR | Analog Devices Inc | Variable Attenuator, GAAS RoHS : Compliant | 8,391 | |||
| NBXHBA019LN1TAG | onsemi | Clock Generator, 125MHz, CMOS, CDSO6 RoHS : Compliant | 7,602 | |||
| BR230D-290A1-28V-019L | Microchip Technology Inc | Electromechanical Relay, 4PDT, 29VDC (Coil), 10A (Contact), 28VDC (Contact), Random, AC/DC Output RoHS : Not Compliant | 7,559 | |||
| NBXSBA019LNHTAG | onsemi | Clock Generator, 250MHz, CMOS, CDSO6 RoHS : Compliant | 6,947 | |||
| BR246D-320C1-28V-019L | Microchip Technology Inc | Electromechanical Relay, DPDT, 29VDC (Coil), 10A (Contact), 28VDC (Contact), Random, AC/DC Output RoHS : Not Compliant | 5,794 | |||
MT5C6401-9LXT![]() | Micron Technology Inc | Standard SRAM, 64KX1, 9ns, CMOS, PDIP22 | 5,754 | |||
MT5C6401-9LIT![]() | Micron Technology Inc | Standard SRAM, 64KX1, 9ns, CMOS, PDIP22 | 5,212 | |||
MT5C6401-9L![]() | Micron Technology Inc | Standard SRAM, 64KX1, 9ns, CMOS, PDIP22 RoHS : Not Compliant | 2,874 | |||
| 10147603-00019LF | Amphenol Communications Solutions | Connector Accessory | 446 | |||
![]() Win Source Electronics | 10046971-019LF | Amphenol Corporation | CONN EDGE DUAL FMALE 50POS 0.100 |
| 32,499 | |
| SUM90P10-19L | Vishay Huntington | P-Channel 100-V (D-S) MOSFET |
| 14,400 | ||
| SUM90P10-19L-E3 | Vishay Huntington | MOSFET P-CH 100V 90A D2PAK |
| 13,760 |
| Czy Alldatasheet okazała się pomocna? [ DONATE ] |
O Alldatasheet | Reklama | Kontakt | Polityka prywatności | Link do karty katalogowej | Linki | Lista producentów All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |