046F2HKP Price, sprzedawcę, Stock

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG62A/U, RF Cable Type: RG62, RF Cable Impedance: 93 Ohm. 75 Ohm BNC Male Right Angle to 75 Ohm BNC Male Cable Using 93 Ohm RG62 Coax with HeatShrink., Radio frequency assembly 75 Ohm BNC male right angle to 75 Ohm BNC male cable using 93 Ohm RG62 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male right angle to 75 Ohm BNC male cable using 93 Ohm RG62 coax with heatshrink, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle BNC cable connection on one end and BNC cable connection on the other. Our right angle BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. PE34046/HS can also be known as a right angle BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE34046/HS is built with RG62 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 500 MHz maximum frequency BNC right angle male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34046/HS can also be used in the other direction and will be BNC male to right angle BNC male cable assembly if the opposite connectivity is required. BNC right angle plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male right angle to 75 Ohm BNC male cable using 93 Ohm RG62 coax with heatshrink.

2,060

PE3W04654-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. MMCX Plug Right Angle to MMCX Plug Right Angle Cable 12 Inch Length Using PE-SR405FL Coax., Radio frequency assembly MMCX plug right angle to MMCX plug right angle cable 12 inch length using PE-SR405FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug right angle to MMCX plug right angle cable 12 inch length using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMCX to MMCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle MMCX cable connection on one end and right angle MMCX cable connection on the other. Our right angle MMCX to right angle MMCX cable assemblies have a plug gender on end 1 and plug on end 2. PE3W04654-12 can also be known as a right angle MMCX male to right angle MMCX male cable assembly and will be shipped same-day as it is purchased. MMCX male to MMCX male cable assembly PE3W04654-12 is built with PE-SR405FL which is a formable coax type. The Pasternack formable MMCX cable assembly is manufactured with right angle MMCX to right angle MMCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency MMCX right angle plug to MMCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. MMCX right angle male to MMCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMCX to MMCX cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MMCX plug right angle to MMCX plug right angle cable 12 inch length using PE-SR405FL coax.

1 : $89.89
25 : $85.4
50 : $80.9
100 : $77.31

646

PE3W04645-3

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm. SMP Female to SMA Female Cable 3 Inch Length Using PE-047SR Coax., Radio frequency assembly SMP female to SMA female cable 3 inch length using PE-047SR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMA female cable 3 inch length using PE-047SR coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMP cable connection on one end and a SMA cable connection on the other. Our SMP to SMA cable assembly has a female gender on end 1 and a female on end 2. PE3W04645-3 can also be known as a SMP jack to SMA jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.05-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. This radio frequency cable assembly can withstand temperatures ranging from -55 to 100 degrees C. The semi-rigid RF cable has a between series connection. Our SMP female to SMA female cable has a maximum VSWR of 1.4:1. SMP jack to SMA jack cable assembly PE3W04645-3 is built with PE-047SR which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold plating, while the other has the solder/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W04645-3 can also be used in the other direction and will be a SMA female to SMP female cable assembly if the opposite connectivity is required. SMP jack to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMA cable assembly for quick shipment worldwide. Variations of SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMA RF cable assembly as per your requirements.

1 : $106.99
10 : $102.71
25 : $98.43
100 : $94.15

PE3C0046/WP-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 60 inches. Waterproof IP68 N Male (Plug) to N Male (Plug) Low Loss Cable 60 Inch Length Using LMR-400 Coax., Radio frequency assembly waterproof IP68 N male (plug) to N male (plug) low loss cable 60 inch length using LMR-400 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0046/WP-60 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0046/WP-60 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C0046/WP-60 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $177.99
25 : $169.09
50 : $160.19
100 : $153.07

PE3C3046/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Blue FAKRA Jack to SMA Female Cable Using LMR-100 Coax with HeatShrink. PE3C3046/HS is a FAKRA jack to SMA female cable using LMR-100A coax. This Pasternack FAKRA jack to SMA female cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm SMA for connector 2. Our jack FAKRA to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3046/HS FAKRA jack to SMA female cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W00465/HS

Pasternack Enterprises

PE3W04667

Pasternack Enterprises

Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm. MMCX Plug to SMA Male Right Angle Cable Using RG188-DS Coax. PE3W04667 is a MMCX plug to SMA male right angle cable using RG188-DS coax. This Pasternack MMCX plug to SMA male right angle cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm SMA for connector 2. MMCX to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMCX to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04667 MMCX plug to SMA male right angle cable assembly is constructed with RG188-DS coax.

PE3W20460-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Fire Rated SMA Male to SMB Plug Right Angle Low Loss Cable 48 Inch Length Using LMR-195-FR Coax., Pasternack’s PE3W20460-48 low loss SMA male to right angle SMB plug RF cable assembly using LMR-195-FR coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMB plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMB cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with an SMA cable connection on one end and a right angle SMB cable connection on the other. Our SMA to SMB cable assembly has a male gender on end 1 and a plug on end 2. PE3W20460-48 can also be known as a low loss SMA plug to right angle SMB male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W20460-48 RF cable has an frpe jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. Our SMA male to right angle SMB plug cable has a maximum VSWR of 1.4:1. This PE3W20460-48 SMA plug to SMB male cable assembly is built with LMR-195-FR, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMB cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this 48-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3W20460-48 can also be used in the other direction and will be a right angle SMB plug to SMA male cable assembly if the opposite connectivity is required. This low loss SMA plug to SMB right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMB cable assembly for quick shipment worldwide. Variations of SMA and SMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMB low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems.

1 : $112.76
10 : $108.25
25 : $103.74
100 : $99.23

PE3W20461

Pasternack Enterprises

Key Specifications, Connector Series 1: MHV, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MHV, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. MHV Male Right Angle to MHV Female Cable Using RG188 Coax. PE3W20461 is a MHV male right angle to MHV female cable using RG188 coax. This Pasternack MHV male right angle to MHV female cable assembly uses a 50 Ohm MHV for connector 1 and a 50 Ohm MHV for connector 2. MHV right angle to MHV coaxial cable assembly uses 90 degree right angle coax cable connector. Our male MHV right angle to female MHV cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20461 MHV male right angle to MHV female cable assembly is constructed with RG188 coax.

PE304-60

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P141, RF Cable Type: PE-P141, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male to N Male Cable 60 Inch Length Using PE-P141 Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to N male cable 60 inch length using PE-P141 coax with heatshrink, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to N male cable 60 inch length using PE-P141 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and N type cable connection on the other. Our SMA to type N cable assemblies have a male gender on end 1 and male on end 2. This SMA to type N cable is a male to male coax assembly, PE304-60, can also be known as a SMA plug to N type plug cable assembly and will be shipped same-day as it is purchased. SMA plug to type N plug cable assembly PE304-60 is built with PE-P141 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 18 GHz maximum frequency SMA male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE304-60 can also be used in the other direction and will be type N male to SMA male cable assembly if the opposite connectivity is required. SMA plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male cable 60 inch length using PE-P141 coax with heatshrink, LF solder.

1 : $445.99
25 : $423.69
50 : $401.39

PE3C0046LF

Pasternack Enterprises

PE33046LF

Pasternack Enterprises

PE3604-60

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 60 inches. BNC Female to BNC Female Cable 60 Inch Length Using RG174 Coax., Radio frequency assembly BNC female to BNC female cable 60 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC female to BNC female cable 60 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a female gender on end 1 and female on end 2. This BNC to BNC cable is a female to female coax assembly, PE3604-60, can also be known as a BNC jack to BNC jack cable assembly and will be shipped same-day as it is purchased. BNC jack to BNC jack cable assembly PE3604-60 is built with RG174 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC female to BNC female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC jack to BNC jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC female to BNC female cable 60 inch length using RG174 coax.

1 : $88.89
25 : $84.45
50 : $80.0
100 : $76.45

PE3C0046

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50. N Male to N Male Cable Using LMR-400 Coax. PE3C0046 is a N type male to N type male cable using LMR-400 coax. This Pasternack type N male to type N male cable assembly uses a 50 Ohm type N for connector 1 and a 50 Ohm N type for connector 2. Our male type N to male type N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C0046 type N male to type N male cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C0460

Pasternack Enterprises

Teledyne HiRel

7704601DA

Teledyne HiRel

NAND GATE, QUAD 2-INPUT, WITH SCHMITT TRIGGERS
RoHS : Not Compliant

7704601CA

Teledyne HiRel

NAND GATE, QUAD 2-INPUT, WITH SCHMITT TRIGGERS
RoHS : Not Compliant

Venkel Ltd.

CRN10-4-6192FT

VENKEL LTD

Chip Resistor Array;CRN10;4;61.9K;�1%;Convex
RoHS : Compliant

CRN10-4-620JT

VENKEL LTD

Chip Resistor Array;CRN10;4;62R;�5%;Convex
RoHS : Compliant

CRN10-4-680JT

VENKEL LTD

Chip Resistor Array;CRN10;4;68R;�5%;Convex
RoHS : Compliant

Waytek, Inc.

T40I0M4 111-04604

HellermannTyton

HellermannTyton T4010M44 standard cable tie is a self-locking nylon tie with a 11.42" length for general-purpose wire, cable, hose, and tubing bundling. Its one-piece construction supports reliable fastening, clean harness organization, and everyday use in electrical and equipment applications.

1,000 : $0.1048
5,000 : $0.0978

100,000

19160-0046

Molex

Wing Lock Wire Connector Grey 18 to 8 GA
RoHS : Compliant

50 : $0.1432
200 : $0.1331
500 : $0.1129
1,000 : $0.1129
5,000 : $0.1028

19,749

19130-0046

Molex

16-14 GA #10 Spade Terminal Blue Insulated Vinyl

100 : $0.2089
200 : $0.1899
500 : $0.1694
1,000 : $0.1532
5,000 : $0.1462

10,400

29004-6

FTZ Industries

FTZ Industries 29004-6 dual-wall adhesive-lined heat shrink tubing is black polyolefin tubing with a 1/8" size and fourteen 6" pieces per package. Its adhesive-lined construction supports moisture sealing, abrasion protection, and durable insulation, with 14 packaged per bag for service and repair work.

10 : $0.4228
20 : $0.3688
50 : $0.3225
100 : $0.3071

9,192

19215-0046

Molex

2 GA Butt Connector Non-Insulated Seamless

10 : $1.6047
50 : $1.4324
100 : $1.2978
200 : $1.2547
500 : $1.2116
1,000 : $1.1632

7,450

AT04-6P-RED

Amphenol Sine Systems

Amphenol Sine Systems AT04-6P-RED AT Series connector receptacle is a red 6-way Deutsch DT-compatible receptacle with a durable thermoplastic housing. It uses front and rear silicone seals, accepts interchangeable DT-style terminals, and requires Amphenol wedgelocks for proper mating.

1 : $1.2964
10 : $1.2181
50 : $1.192
100 : $1.1572
200 : $1.1223
500 : $1.0876

3,379

AT04-6P-EP14

Amphenol Sine Systems

Amphenol Sine Systems AT04-6P-EP14 AT Series bussed receptacle is a 6-way black connector with contacts included. It uses two 3-pin busbars rated 13A each, nickel plating, and a sealed thermoplastic housing for Deutsch DT-compatible circuits.

1 : $5.48
10 : $5.28
50 : $5.11
100 : $4.86
200 : $4.69
500 : $4.53

1,924

AT04-6P-BLK

Amphenol Sine Systems

Amphenol Sine Systems AT04-6P-BLK AT Series connector receptacle is a black 6-way Deutsch DT-compatible receptacle with a durable thermoplastic housing. It uses front and rear silicone seals, accepts interchangeable DT-style terminals, and requires Amphenol wedgelocks for proper mating.

1 : $1.0947
10 : $1.0512
50 : $1.0149
100 : $0.9714
200 : $0.9425
500 : $0.9135

1,397

2066046-4

TE Connectivity

TE 2 Position Mini Fuse Holder 20A 12V
RoHS : Compliant

1 : $2.0343
10 : $1.9602
50 : $1.8967
100 : $1.8013
200 : $1.7375
500 : $1.6742

709

AT04-6P-YLW

Amphenol Sine Systems

Amphenol Sine Systems AT04-6P-YLW AT Series connector receptacle is a yellow 6-way Deutsch DT-compatible receptacle with a durable thermoplastic housing. It uses front and rear silicone seals, accepts interchangeable DT-style terminals, and requires Amphenol wedgelocks for proper mating.

1 : $1.5418
50 : $1.3101
100 : $1.2543
200 : $1.1984
500 : $1.1424

521

AT04-6P-SR01BLK

Amphenol Sine Systems

Amphenol Sine Systems AT04-6P-SR01BLK AT Series connector receptacle is a black 6-way Deutsch DT-compatible receptacle with a strain relief end cap and standard seal. The integral design protects wire seals, reduces rear-seal stress, and helps maintain IP67 protection in harness assemblies.

1 : $3.4917
10 : $3.1707
50 : $2.9145
100 : $2.5344
200 : $2.3935
500 : $2.2809

520

5046

Blue Sea Systems

ST Blade Compact Fuse Block 8 Circuits for ATO/ATC fuse **RETAIL**

1 : $60.38

VCM-04-60SA

InPower Semiconductor Company Ltd

Solid State Off Delay Timer Relay 12V 15A 0-60 sec Inpower DUAL INPUTS

1 : $85.09
5 : $79.74
10 : $74.84
25 : $71.28
50 : $68.61

1046

Blue Sea Systems

Circular Socket Mount USB Charger 48VDC, 4 Amps *RETAIL* dic way, no repl

1 : $51.75
10 : $51.75

AT04-6P-WHT

Amphenol Sine Systems

Amphenol Sine Systems AT04-6P-WHT AT Series connector receptacle is a white 6-way Deutsch DT-compatible receptacle with a durable thermoplastic housing. It uses front and rear silicone seals, accepts interchangeable DT-style terminals, and requires Amphenol wedgelocks for proper mating.

5 : $2.1586
10 : $2.0726
50 : $2.0057
100 : $1.9102
200 : $1.8338
500 : $1.7765

Win Source Electronics

0467005.NRHF

Littelfuse Inc

Fuse Chip Very Fast Acting 5A 32V SMD Solder Pad 0603 T/R CSA / FUSE BOARD MNT 5A 32VAC/VDC 0603
RoHS : Compliant

11,155 : $0.0269
8,335 : $0.03
6,435 : $0.0311
4,675 : $0.0321
3,025 : $0.0331
1,240 : $0.0404

384,853

0466005.NR

Littelfuse Inc

FUSE BOARD MNT 5A 32VAC/VDC 1206
RoHS : Compliant

6,440 : $0.0466
5,155 : $0.0485
3,970 : $0.0504
2,770 : $0.0542
1,785 : $0.0561
835 : $0.0599

81,858

0467.750NRHF

Littelfuse Inc

FUSE BOARD MOUNT 750MA 32VAC/VDC
RoHS : Compliant

11,325 : $0.0265
8,475 : $0.0295
6,560 : $0.0305
4,765 : $0.0315
3,070 : $0.0326
1,260 : $0.0397

56,350

0466.750NR

Littelfuse Inc

FUSE BOARD MOUNT 750MA 63VAC/VDC
RoHS : Compliant

3,870 : $0.0869
2,890 : $0.097
2,235 : $0.1004
1,620 : $0.1037
1,050 : $0.1071
430 : $0.1304

55,100

0466.250NRHF

Littelfuse Inc

Fuse Chip Very Fast Acting 0.25A 125V SMD Solder Pad 1206 T/R CSA / FUSE BOARD MNT 250MA 125VAC/VDC
RoHS : Compliant

5,540 : $0.0542
4,140 : $0.0604
3,200 : $0.0625
2,325 : $0.0646
1,500 : $0.0667
620 : $0.0813

28,000

0460-202-20141

TE Connectivity

CONN PIN 20AWG NICKEL CRIMP / Pin Contact Nickel Crimp 20 AWG Power, Machined
RoHS : Compliant

510 : $0.591
380 : $0.6591
295 : $0.6819
215 : $0.7046
140 : $0.7273
60 : $0.8864

22,356

CD4046BNSR

Texas Instruments

IC PHASE-LOCK LOOP MCPWR 16SO
RoHS : Compliant

1,020 : $0.2943
765 : $0.3283
590 : $0.3396
430 : $0.3509
280 : $0.3623
115 : $0.4415

13,980

0469006.WR

Littelfuse Inc

FUSE BOARD MOUNT 6A 24VDC 1206
RoHS : Compliant

510 : $0.591
380 : $0.6591
295 : $0.6819
215 : $0.7046
140 : $0.7273
60 : $0.8864

6,000

0462-201-1631

TE Connectivity

CONN SOCKET 16-20AWG GOLD CRIMP
RoHS : Compliant

520 : $0.5806
390 : $0.6476
300 : $0.6699
220 : $0.6922
140 : $0.7146
60 : $0.8709

5,000

MT53E256M32D2DS-046 AIT:B

Micron Technology Inc

IC DRAM 8GBIT 2.133GHZ 200WFBGA

3 : $136.8422
2 : $152.6316
1 : $157.8948

2,857

MT53E256M32D2FW-046 WT:B

Micron Technology Inc

LPDDR4 8G 256MX32 FBGA DDP

3 : $118.1819
2 : $131.8182
1 : $136.3637

2,850

MT53E256M32D2FW-046 IT:B TR

Micron Technology Inc

IC DRAM 8GBIT PAR 200TFBGA

3 : $118.1819
2 : $131.8182
1 : $136.3637

1,850

MT53E1536M32D4DE-046 AIT:C

Micron Technology Inc

LPDDR4-4266 1.5Gx32 (48Gb)

1 : $449.6241

500

MT29VZZZCD91SKSM-046 W.17Y

Micron Technology Inc

UMCP 1088G VFBGA

6 : $59.6083
5 : $66.4862
4 : $68.7788
3 : $71.0714
2 : $73.364
1 : $89.4124

239

MTC40F2046S1RC56B

Micron Technology Inc

DDR5-5600 8Gx80 RDIMM 2Rx4 (64GB)

1 : $3,581.76

150

046F2HKP sprzedawcę

Link URL