0800CCNLNNTZCWC Price, sprzedawcę, Stock

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/128-RG400-27478, RF Cable Type: M17/128-RG400, RF Cable Impedance: 50 Ohm, Length: 30 inches. MIL-DTL-17 SMA Male to SMA Male Right Angle Cable 30 Inch Length Using M17/128-RG400 Coax., Radio frequency assembly MIL-DTL-17 SMA male to SMA male right angle cable 30 inch length using M17/128-RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 SMA male to SMA male right angle cable 30 inch length using M17/128-RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/55-3028 SMA to M39012/56-3109 SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/55-3028 SMA cable connection on one end and right angle M39012/56-3109 SMA cable connection on the other. Our M39012/55-3028 SMA to right angle M39012/56-3109 SMA cable assemblies have a male gender on end 1 and male on end 2. This M39012/55-3028 SMA to M39012/56-3109 SMA cable is a male to male coax assembly, PE3M0080-30, can also be known as a MIL-DTL-17/MIL-C-17 M39012/55-3028 SMA plug to right angle M39012/56-3109 SMA plug cable assembly and will be shipped same-day as it is purchased. M39012/55-3028 SMA plug to M39012/56-3109 SMA plug cable assembly PE3M0080-30 is built with M17/128-RG400 which is a flexible coax type. The Pasternack flexible M39012/55-3028 SMA cable assembly is manufactured with M39012/55-3028 SMA to right angle M39012/56-3109 SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 12.4 GHz maximum frequency M39012/55-3028 SMA male to M39012/56-3109 SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0080-30 can also be used in the other direction and will be right angle M39012/56-3109 SMA male to M39012/55-3028 SMA male cable assembly if the opposite connectivity is required. M39012/55-3028 SMA plug to M39012/56-3109 SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/55-3028 SMA to M39012/56-3109 SMA cable assembly for quick shipment worldwide. Variations of M39012/55-3028 SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 SMA male to SMA male right angle cable 30 inch length using M17/128-RG400 coax.

1 : $315.99
25 : $300.19
50 : $284.39

PE3W08060-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.92mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. 3.5mm Female to 2.92mm Male Cable 50 cm Using PE-SR402AL Coax., Radio frequency assembly 3.5mm female to 2.92mm male cable 50 cm using PE-SR402AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 3.5mm female to 2.92mm male cable 50 cm using PE-SR402AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 3.5mm to 2.92mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 3.5mm cable connection on one end and 2.92mm cable connection on the other. Our 3.5mm to 2.92mm cable assemblies have a female gender on end 1 and male on end 2. This 3.5mm to 2.92mm cable is a female to male coax assembly, PE3W08060-50CM, can also be known as a 3.5mm jack to 2.92mm plug cable assembly and will be shipped same-day as it is purchased. 3.5mm jack to 2.92mm plug cable assembly PE3W08060-50CM is built with PE-SR402AL which is a semi-rigid coax type. The Pasternack semi-rigid 3.5mm cable assembly is manufactured with 3.5mm to 2.92mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 36 GHz maximum frequency 3.5mm female to 2.92mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08060-50CM can also be used in the other direction and will be 2.92mm male to 3.5mm female cable assembly if the opposite connectivity is required. 3.5mm jack to 2.92mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 3.5mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 3.5mm female to 2.92mm male cable 50 cm using PE-SR402AL coax.

1 : $253.99
25 : $241.29
50 : $228.59
100 : $218.43

PE39080/HS-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Jack, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Reverse Polarity SMA Plug to Reverse Polarity SMA Jack Cable 12 Inch Length Using RG316-DS Coax with HeatShrink., Radio frequency assembly reverse polarity SMA plug to reverse polarity SMA jack cable 12 inch length using RG316-DS coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Reverse polarity SMA plug to reverse polarity SMA jack cable 12 inch length using RG316-DS coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity SMA cable connection on one end and reverse polarity SMA cable connection on the other. Our reverse polarity SMA to reverse polarity SMA cable assemblies have a plug gender on end 1 and jack on end 2. PE39080/HS-12 can also be known as a reverse polarity SMA male to reverse polarity SMA female cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA male to reverse polarity SMA female cable assembly PE39080/HS-12 is built with RG316-DS which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this reverse polarity SMA plug to reverse polarity SMA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE39080/HS-12 can also be used in the other direction and will be reverse polarity SMA jack to reverse polarity SMA plug cable assembly if the opposite connectivity is required. SMA reverse polarity male to SMA reverse polarity female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA plug to reverse polarity SMA jack cable 12 inch length using RG316-DS coax with heatshrink.

1 : $155.99
25 : $148.19
50 : $140.39
100 : $134.15

PE3W08080

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm. N Male to TNC Female 4 Hole Flange Cable Using RG188-DS Coax. PE3W08080 is a N male to TNC female 4 hole flange cable using RG188-DS coax. This Pasternack N male to TNC female 4 hole flange cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. Our male N to female TNC 4 hole flange cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08080 N male to TNC female 4 hole flange cable assembly is constructed with RG188-DS coax.

PE39080

Pasternack Enterprises

PE3C2080/HS-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male to N Male Low Loss Cable 12 Inch Length Using LMR-400-UF Coax With Times Microwave Components with HeatShrink., Radio frequency assembly N male to N male low loss cable 12 inch length using LMR-400-UF coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 12 inch length using LMR-400-UF coax with Times Microwave components with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss N type to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C2080/HS-12 can also be known as a low loss type N plug to N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3C2080/HS-12 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 12 inch length using LMR-400-UF coax with Times Microwave components with heatshrink.

1 : $127.99
25 : $121.59
50 : $115.19
100 : $110.07

PE3C2080LF/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. N Male to N Male Low Loss Cable Using LMR-400-UF Coax with Times Microwave Components with HeatShrink, LF Solder., Radio frequency assembly N male to N male low loss cable using LMR-400-UF coax with Times Microwave components with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable using LMR-400-UF coax with Times Microwave components with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and N type cable connection on the other. Our low loss type N to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C2080LF/HS can also be known as a low loss type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3C2080LF/HS is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable using LMR-400-UF coax with Times Microwave components with heatshrink, LF solder.

PE3C4080LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Female to N Male Cable Using LMR-195 Coax, LF Solder. PE3C4080LF is a reverse polarity SMA female to N male cable using LMR-195 coax. This Pasternack reverse polarity SMA female to N male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. Our reverse polarity female SMA to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C4080LF SMA reverse polarity female to N male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C4080LF/HS-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Jack, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male to Reverse Polarity SMA Jack Low Loss Cable 36 Inch Length Using LMR-195 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to reverse polarity SMA jack low loss cable 36 inch length using LMR-195 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to reverse polarity SMA jack low loss cable 36 inch length using LMR-195 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a reverse polarity SMA cable connection on the other. Our low loss type N to reverse polarity SMA cable assembly has a male gender on end 1 and a jack on end 2. PE3C4080LF/HS-36 can also be known as a low loss type N plug to reverse polarity SMA female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C4080LF/HS-36 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Type N plug to reverse polarity SMA female cable assembly PE3C4080LF/HS-36 is built with LMR-195 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C4080LF/HS-36 can also be used in the other direction and will be a reverse polarity SMA jack to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to SMA reverse polarity female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $89.99
25 : $85.49
50 : $80.99
100 : $77.39

PE3W00808/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. TNC Male to TNC Male Low Loss Cable Using LMR-400-UF Coax with HeatShrink., Radio frequency assembly TNC male to TNC male low loss cable using LMR-400-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male low loss cable using LMR-400-UF coax with heatshrink, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our low loss TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W00808/HS can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3W00808/HS is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male low loss cable using LMR-400-UF coax with heatshrink.

PE3W08033

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SMA Male to SMB Jack Cable Using RG174 Coax. PE3W08033 is a SMA male to SMB jack cable using RG174 coax. This Pasternack SMA male to SMB jack cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMB for connector 2. Our male SMA to jack SMB cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08033 SMA male to SMB jack cable assembly is constructed with RG174 coax.

PE3W08074LF/HS-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. BNC Male to Push-On SMP Female Right Angle Cable 48 Inch Length Using RG316 Coax with HeatShrink, LF Solder., Radio frequency assembly BNC male to push-on SMP female right angle cable 48 inch length using RG316 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male to push-on SMP female right angle cable 48 inch length using RG316 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC cable connection on one end and a right angle SMP cable connection on the other. Our BNC to right angle SMP cable assembly has a male gender on end 1 and a female on end 2. PE3W08074LF/HS-48 can also be known as a BNC plug to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3W08074LF/HS-48 RF cable has a FEP jacket of 0.102-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Our BNC male to right angle SMP female cable has a maximum VSWR of 1.4:1. BNC plug to SMP jack cable assembly PE3W08074LF/HS-48 is built with RG316 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to right angle SMP cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the crimp/crimp attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W08074LF/HS-48 can also be used in the other direction and will be a right angle SMP female to BNC male cable assembly if the opposite connectivity is required. BNC plug to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to SMP cable assembly for quick shipment worldwide. Variations of BNC and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to SMP RF cable assembly as per your requirements.

1 : $74.99
25 : $71.24
50 : $67.49
100 : $64.49

PE3W08084/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Cable Using RG405 Coax with HeatShrink. PE3W08084/HS is a SMA male to SMA male cable using RG405 coax. This Pasternack SMA male to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to male SMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W08084/HS SMA male to SMA male cable assembly is constructed with RG405 coax.

PE3W15080LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-LW195, RF Cable Type: LMR-LW195, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Female Cable Using LMR-LW195 Coax with HeatShrink, LF Solder. PE3W15080LF/HS is a SMA male right angle to SMA female cable using LMR-LW195 coax. This Pasternack SMA male right angle to SMA female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15080LF/HS SMA male right angle to SMA female cable assembly is constructed with LMR-LW195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C10807/HS

Pasternack Enterprises

TE Connectivity

CRG0805ZR

TE Connectivity

CRG0805 ZEROHM Resistance Value: 0 Ω Element Type: Thick Film Resistor Type: General Purpose Resistor Passive Component Tolerance: 0 % Package Size Code: 0805 0 Ω Thick Film General Purpose Resistor 0 % | Surface Mount Resistor | Part Number: CRG0805ZR | Internal Number: 1623401-1 | Alias Number: CRG0805ZRJIT | TE Connectivity
RoHS : Compliant

10,000 : $0.01
5,000 : $0.01
2,500 : $0.01
1,000 : $0.01
500 : $0.01
250 : $0.01
100 : $0.01
50 : $0.01
25 : $0.01
10 : $0.01
1 : $0.01

1,016,309

CRG0805F1K2

TE Connectivity

CRG0805 1% 1K2 Resistance Value: 1.2K Ω Element Type: Thick Film Resistor Type: General Purpose Resistor Passive Component Tolerance: 1 % Package Size Code: 0805 Surface Mount Resistor | 1.2K Ω Thick Film General Purpose Resistor 1 % | Part Number: CRG0805F1K2 | Internal Number: 1623133-1 | Alias Number: CRG0805F1K2JIT | TE Connectivity
RoHS : Compliant

10,000 : $0.01
5,000 : $0.01
2,500 : $0.01
1,000 : $0.01
500 : $0.01
250 : $0.01
100 : $0.01
50 : $0.01
25 : $0.01
10 : $0.01
1 : $0.01

390,423

CRG0805F12K

TE Connectivity

CRG0805 1% 12K Resistance Value: 12K Ω Element Type: Thick Film Resistor Type: General Purpose Resistor Passive Component Tolerance: 1 % Package Size Code: 0805 Surface Mount Resistor | 12K Ω Thick Film General Purpose Resistor 1 % | Part Number: CRG0805F12K | Internal Number: 1623108-1 | Alias Number: CRG0805F12KJIT | TE Connectivity
RoHS : Compliant

10,000 : $0.01
5,000 : $0.01
2,500 : $0.01
1,000 : $0.01
500 : $0.01
250 : $0.01
100 : $0.01
50 : $0.01
25 : $0.01
10 : $0.01
1 : $0.01

43,596

CRGCQ0805F27K

TE Connectivity

CRGCQ 0805 27K 1% Resistance Value: 27K Ω Element Type: Thick Film Resistor Type: General Purpose Resistor Passive Component Tolerance: 1 % Package Size Code: 0805 Surface Mount Resistor | 27K Ω Thick Film General Purpose Resistor 1 % | Part Number: CRGCQ0805F27K | Internal Number: 4-2176341-2 | TE Connectivity
RoHS : Compliant

10,000 : $0.01
5,000 : $0.01
2,500 : $0.01
1,000 : $0.01
500 : $0.01
250 : $0.01
100 : $0.01
50 : $0.01
25 : $0.02
10 : $0.02
1 : $0.02

43,347

CRG0805F620R

TE Connectivity

CRG0805 1% 620R Resistance Value: 620 Ω Element Type: Thick Film Resistor Type: General Purpose Resistor Passive Component Tolerance: 1 % Package Size Code: 0805 Surface Mount Resistor | 620 Ω Thick Film General Purpose Resistor 1 % | Part Number: CRG0805F620R | Internal Number: 1623266-1 | Alias Number: CRG0805F620RJIT | TE Connectivity
RoHS : Compliant

10,000 : $0.01
5,000 : $0.01
2,500 : $0.01
1,000 : $0.01
500 : $0.01
250 : $0.01
100 : $0.01
50 : $0.01
25 : $0.01
10 : $0.01
1 : $0.01

36,229

BMC-Q1EY0080H

TE Connectivity

BMC-Q 0402 80R 25% Tol. High Current Impedance: 80 Ω Current Rating (Max): 450 mA DC Resistance: .2 Ω Package Size Code: 0402 Product Length: .039 in Automotive Grade Multilayer Chip Bead | 80 Ω 450 mA .2 Ω 0402 | Part Number: BMC-Q1EY0080H | Internal Number: 1-2176742-5 | TE Connectivity
RoHS : Compliant

10,000 : $0.05
5,000 : $0.06
2,500 : $0.06
1,000 : $0.06
500 : $0.06
250 : $0.06
100 : $0.06
50 : $0.06
25 : $0.06
10 : $0.06
1 : $0.07

19,992

CRGCQ0805J100K

TE Connectivity

CRGCQ 0805 100K 5% Resistance Value: 100K Ω Element Type: Thick Film Resistor Type: General Purpose Resistor Passive Component Tolerance: 5 % Package Size Code: 0805 Surface Mount Resistor | 100K Ω Thick Film General Purpose Resistor 5 % | Part Number: CRGCQ0805J100K | Internal Number: 3-2176342-1 | TE Connectivity
RoHS : Compliant

10,000 : $0.01
5,000 : $0.01
2,500 : $0.01
1,000 : $0.01
500 : $0.01
250 : $0.01
100 : $0.01
50 : $0.01
25 : $0.01
10 : $0.01
1 : $0.01

17,575

CRGH0805F100K

TE Connectivity

CRGH0805 1% 100K 0.33W Resistance Value: 100K Ω Element Type: Thick Film Resistor Type: Power Resistor Passive Component Tolerance: 1 % Package Size Code: 0805 Surface Mount Resistor | 100K Ω Thick Film Power Resistor 1 % | Part Number: CRGH0805F100K | Internal Number: 8-1879511-8 | TE Connectivity
RoHS : Compliant

10,000 : $0.03
5,000 : $0.03
2,500 : $0.03
1,000 : $0.03
500 : $0.04
250 : $0.04
100 : $0.04
50 : $0.04
25 : $0.04
10 : $0.04
1 : $0.04

16,212

CRGCQ0805F2K7

TE Connectivity

CRGCQ 0805 2K7 1% Resistance Value: 2.7K Ω Element Type: Thick Film Resistor Type: General Purpose Resistor Passive Component Tolerance: 1 % Package Size Code: 0805 Surface Mount Resistor | 2.7K Ω Thick Film General Purpose Resistor 1 % | Part Number: CRGCQ0805F2K7 | Internal Number: 3-2176341-0 | TE Connectivity
RoHS : Compliant

10,000 : $0.01
5,000 : $0.01
2,500 : $0.01
1,000 : $0.01
500 : $0.01
250 : $0.01
100 : $0.01
50 : $0.01
25 : $0.02
10 : $0.02
1 : $0.02

12,520

CRGH0805J15R

TE Connectivity

CRGH0805 5% 15R 0.33W Resistance Value: 15 Ω Element Type: Thick Film Resistor Type: Power Resistor Passive Component Tolerance: 5 % Package Size Code: 0805 Surface Mount Resistor | 15 Ω Thick Film Power Resistor 5 % | Part Number: CRGH0805J15R | Internal Number: 3-1879377-0 | TE Connectivity
RoHS : Compliant

10,000 : $0.02
5,000 : $0.02
2,500 : $0.02
1,000 : $0.02
500 : $0.02
250 : $0.02
100 : $0.02
50 : $0.02
25 : $0.03
10 : $0.03
1 : $0.03

5,978

CPF-A-0805B26R7E

TE Connectivity

CPF A 0805 26R7 0.1% 25PPM 5K RL Resistance Value: 26.7 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0805 Surface Mount Resistor | 26.7 Ω Thin Film Precision Resistor .1 % | Part Number: CPF-A-0805B26R7E | Internal Number: 2176238-8 | TE Connectivity
RoHS : Compliant

2,500 : $0.28
1,000 : $0.28
500 : $0.29
250 : $0.3
100 : $0.31
50 : $0.31
25 : $0.32
10 : $0.33
1 : $0.34

4,900

CRGCQ0805J470K

TE Connectivity

CRGCQ 0805 470K 5% Resistance Value: 470K Ω Element Type: Thick Film Resistor Type: General Purpose Resistor Passive Component Tolerance: 5 % Package Size Code: 0805 Surface Mount Resistor | 470K Ω Thick Film General Purpose Resistor 5 % | Part Number: CRGCQ0805J470K | Internal Number: 3-2176342-5 | TE Connectivity
RoHS : Compliant

10,000 : $0.01
5,000 : $0.01
2,500 : $0.01
1,000 : $0.01
500 : $0.01
250 : $0.01
100 : $0.01
50 : $0.01
25 : $0.01
10 : $0.01
1 : $0.01

3,242

CPF0805B3K9E1

TE Connectivity

CPF 0805 3K9 0.1% 25PPM 1K RL Resistance Value: 3.9K Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0805 Surface Mount Resistor | 3.9K Ω Thin Film Precision Resistor .1 % | Part Number: CPF0805B3K9E1 | Internal Number: 7-1614884-4 | TE Connectivity
RoHS : Compliant

500 : $0.31
250 : $0.32
100 : $0.33
50 : $0.34
25 : $0.36
10 : $0.37
1 : $0.38

2,224

CPF-A-0805B22RE1

TE Connectivity

CPF A 0805 22R 0.1% 25PPM 1K RL Resistance Value: 22 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0805 Surface Mount Resistor | 22 Ω Thin Film Precision Resistor .1 % | Part Number: CPF-A-0805B22RE1 | Internal Number: 2176217-7 | TE Connectivity
RoHS : Compliant

500 : $0.35
250 : $0.36
100 : $0.37
50 : $0.38
25 : $0.39
10 : $0.41
1 : $0.42

2,008

CPF-A-0805B200KE

TE Connectivity

CPF A 0805 200K 0.1% 25PPM 5K RL Resistance Value: 200K Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0805 Surface Mount Resistor | 200K Ω Thin Film Precision Resistor .1 % | Part Number: CPF-A-0805B200KE | Internal Number: 6-2176238-8 | TE Connectivity
RoHS : Compliant

2,500 : $0.31
1,000 : $0.32
500 : $0.32
250 : $0.33
100 : $0.34
50 : $0.35
25 : $0.36
10 : $0.37
1 : $0.37

373

Teledyne HiRel

5962-9080302MKA

Teledyne HiRel

PROM, 8K X 8, 45 NS ACCESS TIME
RoHS : Not Compliant

5962-9080304MKA

Teledyne HiRel

PROM, 8K X 8, 25 NS ACCESS TIME
RoHS : Not Compliant

M38510/50801BKA

Teledyne HiRel

PROG. LOGIC DEVICE, 22-INPUT 10-OUTPUT, 30 NS
RoHS : Not Compliant

5962-9080001MFA

Teledyne HiRel

M38510/10802BAA

Teledyne HiRel

TRANSISTOR ARRAY
RoHS : Not Compliant

5962-9080306MJA

Teledyne HiRel

PROM, 8K X 8, 45 NS ACCESS TIME
RoHS : Not Compliant

5962-9080303M3A

Teledyne HiRel

PROM, 8K X 8, 35 NS ACCESS TIME
RoHS : Not Compliant

M38510/00802BCA

Teledyne HiRel

HEX INVERTING BUFFERS WITH HIGH VOLTAGE OPEN-COLLECTOR OUTPUTS
RoHS : Not Compliant

5962-9080307MJA

Teledyne HiRel

PROM, 8K X 8, 35 NS ACCESS TIME
RoHS : Not Compliant

M38510/00803BBA

Teledyne HiRel

BUFFER/DRIVER, HEX, NONINVERTING, WITH OPEN-COLLECTOR OUTPUTS
RoHS : Not Compliant

M38510/00803BAA

Teledyne HiRel

BUFFER/DRIVER, HEX, NONINVERTING, WITH OPEN-COLLECTOR OUTPUTS
RoHS : Not Compliant

M38510/00803BCA

Teledyne HiRel

BUFFER/DRIVER, HEX, NONINVERTING, WITH OPEN-COLLECTOR OUTPUTS
RoHS : Not Compliant

M38510/20802BJA

Teledyne HiRel

PROM, 512 X 8, WITH 3-STATE OUTPUTS, 90 NS ACCESS TIME
RoHS : Not Compliant

M38510/00801BDA

Teledyne HiRel

BUFFER/DRIVER, HEX, INVERTING, WITH OPEN-COLLECTOR OUTPUTS
RoHS : Not Compliant

5962-9080301M3A

Teledyne HiRel

PROM, 8K X 8, 55 NS ACCESS TIME
RoHS : Not Compliant

Waytek, Inc.

58130802

Southwire Company LLC

22/3 Shielded Cable Gray PVC Blk Rd Natrl Tinned Conductors -20C to 80C UL Type CM

500 : $0.6848
5,000 : $0.4747

10,000

0299080.ZXNV

Littelfuse Inc

80A Maxi Automotive Fuse Clear
RoHS : Compliant

10 : $1.3532
50 : $1.2872
100 : $1.2023
200 : $1.1693
500 : $1.1363
1,000 : $0.9594

6,093

6420080BKE248

ShawCor Ltd

DSG-Canusa SpliceMelt adhesive-lined heat shrink tubing is black tubing sized 8 mm for sealing and protecting splices, terminals, and inline connections. Its adhesive-lined construction supports moisture resistance, abrasion protection, and durable environmental insulation.

1 : $7.04
10 : $6.08
50 : $5.5
100 : $5.04
500 : $4.76

1,943

TPS080808

Thomas & Betts

Thomas & Betts Harnessflex TPS080808 hinged tee fitting is a conduit branch fitting with .250" left, center, and right openings for corrugated loom routing. Its hinged tee design supports clean three-way harness branching while maintaining organized conduit protection in vehicle and equipment wiring applications.

1 : $5.6495
50 : $5.0359
100 : $4.5704
200 : $4.4223
500 : $4.2741
1,000 : $4.1049

970

YPS080808

Thomas & Betts

Thomas & Betts Harnessflex YPS080808 hinged Y fitting is a conduit branch fitting with .250" left, center, and right openings for corrugated loom routing. Its hinged Y design supports smooth harness branching while maintaining organized conduit protection in vehicle and equipment wiring applications.

1 : $4.1118
50 : $3.6652
100 : $3.3264
200 : $3.2186
500 : $3.1108
1,000 : $2.9876

673

08099080

Littelfuse Inc

Manual Battery Disconnect SPST W/Boot 150A M10 Term Zinc-plated steel

1 : $27.14
10 : $24.23
50 : $22.29
100 : $21.56
200 : $20.84
500 : $20.23

260

181080P-01-1

Eaton Electronics

80 AMP Auto Reset Hi Amp Panel Mount Circuit Breaker 181080P-01-1

1 : $35.83
5 : $31.99
10 : $29.83
50 : $28.16
100 : $26.83
200 : $25.66

118

122A08-00M-KA

Eaton Electronics

ShortStop Circuit Breaker 8A Metal Keps Nuts Type 2 BUSSMANN TYPE II

1 : $4.5432
50 : $3.7605
100 : $3.2833
200 : $3.0924
500 : $2.9586

102

175-S1-080-2

80A Push Trip Reset 1/4" Stud Surface S X S Circuit Breaker HI AMP SIDE BY SIDE 46983

1 : $32.66
5 : $29.16
10 : $27.33
50 : $25.8
100 : $24.58
200 : $23.35

08080200

Littelfuse Inc

Manual Battery Disconnect W/ Push Button 150A

1 : $72.77
5 : $64.97
10 : $60.64
50 : $57.17
100 : $54.57
200 : $51.97

875-S1-080-2

Surface Mount High Amp Circuit Breaker, Type III, On-Off, 80 Amps, 48VDC

1 : $41.43
5 : $39.77
10 : $38.1
50 : $36.71
100 : $35.6

6420080CLE248

ShawCor Ltd

DSG-Canusa SpliceMelt adhesive-lined heat shrink tubing is clear tubing sized 8 mm for sealing and protecting splices, terminals, and inline connections. Its adhesive-lined construction supports moisture resistance, abrasion protection, and durable environmental insulation.

1 : $7.09
10 : $6.11
50 : $5.57
100 : $5.09
500 : $4.81

187080F-03-1

Eaton Electronics

Marine Rate Circuit Breaker SURFACE MOUNT 80 AMP MULT 20 MIN 20

1 : $61.81
5 : $58.24
10 : $56.28
20 : $54.67
50 : $53.68
100 : $51.08

19M-P10-B-080-02

80A Series 19 Circuit Breaker Type 3 Manual Reset Button Sensata Klixon SDLM-80

1 : $37.19
5 : $33.61
10 : $31.66
50 : $30.05
100 : $28.74
200 : $27.45

C2080

Heyco

Heyco C2080 liquid-tight hole plug is a sealing panel plug sized for a 1.375" opening to close unused liquid-tight conduit entry holes. Its sealing design supports secure retention, moisture resistance, and cleaner enclosure protection in electrical and equipment applications.
RoHS : Compliant

10 : $1.0184
50 : $0.9777
100 : $0.9471
200 : $0.8962
500 : $0.8657
1,000 : $0.835