139ZL-AE2-R Price, sprzedawcę, Stock

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. TNC Male to N Female Low Loss Cable 24 Inch Length Using LMR-195 Coax with HeatShrink, LF Solder., Radio frequency assembly TNC male to N female low loss cable 24 inch length using LMR-195 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to N female low loss cable 24 inch length using LMR-195 coax with heatshrink, LF solder, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and N type cable connection on the other. Our low loss TNC to type N cable assemblies have a male gender on end 1 and female on end 2. PE3C1393LF/HS-24 can also be known as a low loss TNC plug to type N jack cable assembly and will be shipped same-day as it is purchased. TNC plug to N type jack cable assembly PE3C1393LF/HS-24 is built with LMR-195 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this TNC male to N type female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1393LF/HS-24 can also be used in the other direction and will be type N female to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to N type cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to N female low loss cable 24 inch length using LMR-195 coax with heatshrink, LF solder.

1 : $100.99
25 : $95.94
50 : $90.89
100 : $86.85

1,373

PE3W01390

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. 2.92mm Male to 2.92mm Female Bulkhead Cable Using PE-SR405FLJ Coax., Radio frequency assembly 2.92mm male to 2.92mm female bulkhead cable using PE-SR405FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to 2.92mm female bulkhead cable using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a 2.92mm bulkhead cable connection on the other. Our 2.92mm to 2.92mm cable assembly has a male gender on end 1 and a female on end 2. PE3W01390 can also be known as a 2.92mm plug to 2.92mm jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01390 RF cable has a FEP jacket of 0.098-inch diameter. The formable RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. 2.92mm plug to 2.92mm jack cable assembly PE3W01390 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a clamp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W01390 can also be used in the other direction and will be a 2.92mm female bulkhead to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to 2.92mm jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 2.92mm RF cable assembly as per your requirements.

355

PEANOM1139

Pasternack Enterprises

Key Specifications. Antenna Type Mobile Polarization Vertical Connector 1 Polarity Standard Connector Series N Connector Gender Male Impedance 50 Ohm. 4 Cellular, 5 Wi-Fi, 1 GPS Combination Antenna 4 NType, 5 RP SMA, 1 TNC Connector White. The Pasternack PEANOM1139 is a 10-in-1 combination antenna designed for public safety, emergency services, mobilebase stations, autonomous vehicles, fleet management, smart cities, smart utilities, or industrial IoT applications. Thisvertically polarized omnidirectional antenna has TNC male, N male and RPSMA male connectors with 17 feet cable leads.Our high-quality mobile antenna with 10 ports has a typical input VSWR of 2:1. The IoT combination antenna from Pasternack has an overall length of 7 inches, width of 7 inches, and weight of 4 lbs. ThisPEANOM1139 mobile antenna is IP69K-rated and has a black-colored radome made of UV-stabilized ABS. The 4 cellular, 5Wi-Fi, 1 GPS combination antenna has an impedance of 50 Ohms and a maximum input power of 10 Watts. Our vertically polarized mobile antenna can operate at temperatures ranging from -40 to 70 degrees C. This MIMO-capableIoT antenna features four 4G/5G, five 2.4/5 GHz, and one L1/G1 GPS band elements in one radome. Emergency services,first responders, and fleets can rely on our 10-in-1 combination antenna to maintain a secure link between vehicles anddispatch centers.

1 : $823.99
10 : $791.03
25 : $758.07
100 : $725.11

PE3W13944-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 3.5mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 3.5mm Female Bulkhead to 3.5mm Female Cable Using PE-SR402FLJ Coax in 12 Inch., Radio frequency assembly 3.5mm female bulkhead to 3.5mm female cable using PE-SR402FLJ coax in 12 inch from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female bulkhead to 3.5mm female cable using PE-SR402FLJ coax in 12 inch, 3.5mm cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 3.5mm to 3.5mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 3.5mm bulkhead cable connection on one end and 3.5mm cable connection on the other. Our 3.5mm to 3.5mm cable assemblies have a female gender on end 1 and female on end 2. This 3.5mm to 3.5mm cable is a female to female coax assembly, PE3W13944-12, can also be known as a 3.5mm jack to 3.5mm jack cable assembly and will be shipped same-day as it is purchased. 3.5mm jack to 3.5mm jack cable assembly PE3W13944-12 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to 3.5mm cable connectors, has a 50 Ohm impedance. RF specs on this 3.5mm female bulkhead to 3.5mm female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W13944-12 can also be used in the other direction and will be 3.5mm female to 3.5mm female bulkhead cable assembly if the opposite connectivity is required. 3.5mm jack bulkhead to 3.5mm jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to 3.5mm cable assembly for quick shipment worldwide. Variations of 3.5mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 3.5mm female bulkhead to 3.5mm female cable using PE-SR402FLJ coax in 12 inch.

1 : $743.99
25 : $706.79
50 : $669.59
100 : $639.83

PE3FCA139-7M

Pasternack Enterprises

Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 60 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: FC, Connector 1 Polish Type: APC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 200, Max Crush Resistance, Long Term (N/100mm): 50, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Simplex FC APC, NK to ST UPC, SM OS2, 2.0mm Riser, Yellow-7M. Pasternack’s PE3FCA139-7M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 7-meter long patch cable assembly is equipped with simplex FC/APC to ST/UPC connectors. Our yellow fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This patch cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, fiber optic test and measurement, medical and biomedical, military and defense, industrial automation and sensing and scientific research and high-precision optical systems. With the flexibility of custom lengths, the PE3FCA139-7M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. Pasternack has one of the largest in-stock selections of FC/APC to ST/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements.

1 : $24.89
5 : $23.89
10 : $22.9
25 : $21.9

PE3W13955/HS-300

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. SMA Male to BNC Male Low Loss Cable 300 Inch Length Using LMR-195-UF Coax with HeatShrink., Radio frequency assembly SMA male to BNC male low loss cable 300 inch length using LMR-195-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to BNC male low loss cable 300 inch length using LMR-195-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a BNC cable connection on the other. Our low loss SMA to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3W13955/HS-300 can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W13955/HS-300 RF cable has a TPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. Our SMA male to BNC male cable has a maximum VSWR of 1.4:1. SMA plug to BNC plug cable assembly PE3W13955/HS-300 is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W13955/HS-300 can also be used in the other direction and will be a BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA and BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $233.99
10 : $229.31
25 : $224.63
100 : $219.95

PE3W13970-640CM

Pasternack Enterprises

1 : $269.99
25 : $256.49
50 : $242.99
100 : $232.19

PE3W19139

Pasternack Enterprises

Key Specifications, Connector Series 1: SHV, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm. 50 Ohm SHV Jack to 75 Ohm SMB Plug Cable Using 75 Ohm RG59 Coax. PE3W19139 is a SHV jack to SMB plug cable using RG59 coax. This Pasternack SHV jack to SMB plug cable assembly uses a 50 Ohm SHV for connector 1 and a 75 Ohm SMB for connector 2. Our jack SHV to plug SMB cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3W19139 SHV jack to SMB plug cable assembly is constructed with RG59 coax.

PE3W21398

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Thread, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. SMA Female to Reverse Thread SMA Female Bulkhead Cable Using RG178 Coax. PE3W21398 is a SMA female to reverse thread SMA female bulkhead cable using RG178 coax. This Pasternack SMA female to reverse thread SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SMA to reverse thread female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21398 SMA female to SMA reverse thread female bulkhead cable assembly is constructed with RG178 coax.

PE3C11395

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: NEX10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm. 4.1/9.5 Mini DIN Male to NEX10 Male Cable Using SPP-250-LLPL Coax. PE3C11395 is a 4.1/9.5 Mini DIN male to NEX10 male cable using SPP-250-LLPL coax. This Pasternack 4.1/9.5 Mini DIN male to NEX10 male cable assembly uses a 50 Ohm 4.1/9.5 Mini DIN for connector 1 and a 50 Ohm NEX10 for connector 2. Our male 4.1/9.5 Mini DIN to male NEX10 cable assembly uses a corrugated cable type that is 50 Ohm. Pasternack PE3C11395 4.1/9.5 Mini DIN male to NEX10 male cable assembly is constructed with SPP-250-LLPL coax.

PE3C1392

Pasternack Enterprises

PE3W01396

Pasternack Enterprises

Key Specifications, Connector Series 1: SMB, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm. 75 Ohm SMB Jack to 75 Ohm BNC Male Cable Using 75 Ohm RG179 Coax. PE3W01396 is a SMB jack to BNC male cable using RG179 coax. This Pasternack SMB jack to BNC male cable assembly uses a 75 Ohm SMB for connector 1 and a 75 Ohm BNC for connector 2. Our jack SMB to male BNC cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3W01396 SMB jack to BNC male cable assembly is constructed with RG179 coax.

PE3W13924

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Male Right Angle Cable Using RG188-DS Coax. PE3W13924 is a SMA male right angle to SMA male right angle cable using RG188-DS coax. This Pasternack SMA male right angle to SMA male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13924 SMA male right angle to SMA male right angle cable assembly is constructed with RG188-DS coax.

PE3W13976/HS-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMB Jack Bulkhead to TNC Male Low Loss Cable 24 Inch Length Using LMR-195-UF Coax with HeatShrink., Radio frequency assembly SMB jack bulkhead to TNC male low loss cable 24 inch length using LMR-195-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMB jack bulkhead to TNC male low loss cable 24 inch length using LMR-195-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMB to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMB bulkhead cable connection on one end and a TNC cable connection on the other. Our low loss SMB to TNC cable assembly has a jack gender on end 1 and a male on end 2. PE3W13976/HS-24 can also be known as a low loss SMB female to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W13976/HS-24 RF cable has a TPE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. SMB female to TNC plug cable assembly PE3W13976/HS-24 is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W13976/HS-24 can also be used in the other direction and will be a TNC male to SMB jack bulkhead cable assembly if the opposite connectivity is required. Low loss SMB female bulkhead to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMB to TNC cable assembly for quick shipment worldwide. Variations of SMB and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMB to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $117.99
10 : $115.63
25 : $113.27
100 : $110.91

PE3C11139

Pasternack Enterprises

Teledyne HiRel

54F139FMQB

Teledyne HiRel

DUAL 1-OF-4 DECODER

54F139LMQB

Teledyne HiRel

DUAL 1-OF-4 DECODER

54F139DMQB

Teledyne HiRel

DUAL 1-OF-4 DECODER

DM54LS139E/883

Teledyne HiRel

DUAL 1 of 4 DECODER

DM54LS139J/883

Teledyne HiRel

DUAL 1 of 4 DECODER

Venkel Ltd.

C0805C0G101-391JNP

VENKEL LTD

Chip Capacitor;0805;C0G;100V;390pF;�5%
RoHS : Compliant

12,000

C0805C0G101-391KNE

VENKEL LTD

Chip Capacitor;0805;C0G;100V;390pF;�10%
RoHS : Compliant

12,000

C1206C0G101-391JNP

VENKEL LTD

Chip Capacitor;1206;C0G;100V;390pF;�5%
RoHS : Compliant

6,000

C0805C0G201-392KNE

VENKEL LTD

HV Chip Capacitor;0805;C0G;200V;3900pF;�10%
RoHS : Compliant

C0805C0G631-391GNE

VENKEL LTD

HV Chip Capacitor;0805;C0G;630V;390pF;�2%
RoHS : Compliant

C1210X7R251-391KNE

VENKEL LTD

HV Chip Capacitor;1210;X7R;250V;390pF;�10%
RoHS : Compliant

C1825X7R251-393KNE

VENKEL LTD

HV Chip Capacitor;1825;X7R;250V;0.039uF;�10%
RoHS : Compliant

C1210X7R201-392KNE

VENKEL LTD

HV Chip Capacitor;1210;X7R;200V;3900pF;�10%
RoHS : Compliant

C1808C0G631-390JNE

VENKEL LTD

HV Chip Capacitor;1808;C0G;630V;39pF;�5%
RoHS : Compliant

C1825X7R201-394KNE

VENKEL LTD

HV Chip Capacitor;1825;X7R;200V;0.39uF;�10%
RoHS : Compliant

C0505HQN101-390JNE

VENKEL LTD

High-Q NP0 Capacitor;0505;HQN;100V;39pF;�5%
RoHS : Compliant

C0805C0G251-392JNE

VENKEL LTD

HV Chip Capacitor;0805;C0G;250V;3900pF;�5%
RoHS : Compliant

C0805C0G631-390KNP

VENKEL LTD

HV Chip Capacitor;0805;C0G;630V;39pF;�10%
RoHS : Compliant

C0805HQN251-390JNP

VENKEL LTD

High-Q NP0 Chip Capacitor;0805;HQN;250V;39pF;�5%
RoHS : Compliant

C1111HQN251-391GNE

VENKEL LTD

High-Q NP0 Capacitor;1111;HQN;250V;390pF;�2%
RoHS : Compliant

Win Source Electronics

INA139NA/250G4

Texas Instruments

IC CURRENT MONITOR 0.5% SOT23-5
RoHS : Compliant

1,075 : $0.2796
860 : $0.291
665 : $0.3023
465 : $0.325
300 : $0.3364
140 : $0.3591

186,040

LM139DRG4

Texas Instruments

IC QUAD DIFF COMPARATOR 14-SOIC
RoHS : Compliant

270 : $1.2604
200 : $1.4059
155 : $1.4544
115 : $1.5028
75 : $1.5513
30 : $1.8907

140,990

AS213-92LF

Skyworks Solutions Inc

IC SW SPDT 0.1-3GHZ GAAS SC70-6
RoHS : Compliant

96 : $3.1516
72 : $3.5152
55 : $3.6364
40 : $3.7576
26 : $3.8788
11 : $4.7273

84,422

MBC13916NT1

Nexperia

RF Amp Single LNA 2.5GHz 5V 4-Pin(3+Tab) SOT-343R T/R / TRANS RF NPN LO NOISE SOT-343

105 : $3.2117
79 : $3.5823
61 : $3.7059
44 : $3.8294
29 : $3.9529
12 : $4.8176

65,385

FP5139BWR-LF

Feeling Technology Corp

510 : $0.591
380 : $0.6591
295 : $0.6819
215 : $0.7046
140 : $0.7273
60 : $0.8864

25,200

1-390261-2

TE Connectivity

CONN IC DIP SOCKET 8POS TIN / 8 (2 x 4) Pos DIP, 0.3" (7.62mm) Row Spacing Socket Tin Through Hole
RoHS : Compliant

3,365 : $0.1154
2,515 : $0.1288
1,945 : $0.1332
1,415 : $0.1375
915 : $0.142
375 : $0.173

17,396

SN74LVC1G139DCTR

Texas Instruments

2-TO -4 LINE DECODER
RoHS : Compliant

680 : $0.4419
510 : $0.4929
395 : $0.5099
285 : $0.5269
185 : $0.5439
80 : $0.6628

16,320

TPS51393PRJER

Texas Instruments

151 : $2.2257
113 : $2.4825
88 : $2.5682
64 : $2.6537
41 : $2.7393
17 : $3.3385

12,000

LM139DG4

Texas Instruments

QUAD DIFFERENTIAL COMPARATORS
RoHS : Compliant

300 : $1.0166
225 : $1.1339
175 : $1.173
125 : $1.2121
80 : $1.2512
35 : $1.5249

6,928

AP2139AK-2.8TRG1

Diodes Incorporated

IC REG LDO 2.8V 0.25A
RoHS : Compliant

2,440 : $0.123
1,825 : $0.1371
1,410 : $0.1419
1,025 : $0.1466
665 : $0.1513
275 : $0.1844

6,000

AD8139ARDZ

Analog Devices Inc

IC OPAMP DIFF 410MHZ RRO 8SOIC
RoHS : Compliant

36 : $8.3864
29 : $8.7273
23 : $9.0682
16 : $9.75
10 : $10.091
5 : $10.7728

5,186

AD8139ARDZ-REEL

Analog Devices Inc

IC OPAMP DIFF 1 CIRCUIT 8SOIC
RoHS : Compliant

36 : $8.3864
29 : $8.7273
23 : $9.0682
16 : $9.75
10 : $10.091
5 : $10.7728

4,960

LT1394IS8

Linear Technology

7ns, Low Power, Single Supply, Ground-Sensing Comparator
RoHS : Not Compliant

35 : $8.7267
26 : $9.7336
20 : $10.0692
15 : $10.4049
10 : $10.7405
4 : $13.09

4,227

SN74HC139PWG4

Texas Instruments

IC DECODER/DEMUX 1X2:4 16TSSOP
RoHS : Compliant

1,090 : $0.3083
815 : $0.344
630 : $0.3558
460 : $0.3677
300 : $0.3796
125 : $0.4626

1,360

LM139FKB

Texas Instruments

Quad Differential Comparator 20-LCCC -55 to 125
RoHS : Not Compliant

16 : $21.7314
12 : $24.2388
9 : $25.0747
7 : $25.9105
5 : $26.7463
2 : $32.597

Wuhan P&S

MC74HC139ADTR2G

onsemi

Dual 1 of 4 Decoder/Demultiplexer
RoHS : Compliant

1 : $0.26
100 : $0.17
500 : $0.14
1,000 : $0.13

12,500

NCP13992AFDR2G

onsemi

Current Mode Resonant Controller
RoHS : Compliant

1 : $2.59
100 : $1.65
500 : $1.37
1,000 : $1.26

2,500

139ZL-AE2-R sprzedawcę

Link URL