158G-AL6-R Price, sprzedawcę, Stock

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to SMA Female Low Loss Cable 36 Inch Length Using LMR-240-UF Coax with HeatShrink., Radio frequency assembly SMA male to SMA female low loss cable 36 inch length using LMR-240-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA female low loss cable 36 inch length using LMR-240-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. PE3C1589/HS-36 can also be known as a low loss SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3C1589/HS-36 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 6 GHz maximum frequency SMA male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1589/HS-36 can also be used in the other direction and will be SMA female to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female low loss cable 36 inch length using LMR-240-UF coax with heatshrink.

1 : $136.99
25 : $130.14
50 : $123.29
100 : $117.81

1,364

PE3FCA158

Pasternack Enterprises

Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: UPC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 300, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Dual SC UPC to ST UPC, MM OM4, 2.0mm Riser, Aqua. Pasternack’s PE3FCA158 fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This duplex cable assembly is equipped with SC/UPC to ST/UPC connectors. Our aqua blue fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. As an OM4 fiber optic jumper, Pasternack’s PE3FCA158 is designed for ultra-high-speed, high-bandwidth data transmission, supporting greater distances and faster speeds than OM1 and OM3 fiber.The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA158 fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. This PE3FCA158 fiber optic cable with a 2 mm cable diameter and 15 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of dual SC/UPC to dual ST/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements.

629

PE3W01582-60

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-DB, RF Cable Type: LMR-400-DB, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male to SMA Male Cable 60 Inch Length Using LMR-400-DB Coax., Radio frequency assembly SMA male to SMA male cable 60 inch length using LMR-400-DB coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to SMA male cable 60 inch length using LMR-400-DB coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3W01582-60, can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3W01582-60 is built with LMR-400-DB which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 60 inch length using LMR-400-DB coax.

1 : $141.99
25 : $134.89
50 : $127.79
100 : $122.11

358

PE3W01580-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR402TN, RF Cable Type: RG402 Tinned, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMA Female to SMA Female Cable 6 Inch Length Using Tinned RG402 Coax., Radio frequency assembly SMA female to SMA female cable 6 inch length using tinned RG402 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female to SMA female cable 6 inch length using tinned RG402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our SMA to SMA cable assembly has a female gender on end 1 and a female on end 2. PE3W01580-6 can also be known as a SMA jack to SMA jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 1 inches, allowing for a single bend without damaging the cable. The semi-rigid RF cable has an in-series connection. Our SMA female to SMA female cable has a maximum VSWR of 1.4:1. SMA jack to SMA jack cable assembly PE3W01580-6 is built with RG402 tinned which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a stainless steel body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. SMA jack to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements.

1 : $87.79
25 : $83.4
50 : $79.01
100 : $75.5

PE3C1584-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMP Female Right Angle to SMP Female Right Angle Cable Using PE-P086 Coax In 60 Inch Length., Radio frequency assembly SMP female right angle to SMP female right angle cable using PE-P086 coax in 60 inch length from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female right angle to SMP female right angle cable using PE-P086 coax in 60 inch length, SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMP cable connection on one end and right angle SMP cable connection on the other. Our right angle SMP to right angle SMP cable assemblies have a female gender on end 1 and female on end 2. This SMP to SMP cable is a female to female coax assembly, PE3C1584-60, can also be known as a right angle SMP jack to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMP jack cable assembly PE3C1584-60 is built with PE-P086 which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with right angle SMP to right angle SMP cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 18 GHz maximum frequency SMP right angle female to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMP right angle jack to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female right angle to SMP female right angle cable using PE-P086 coax in 60 inch length.

1 : $156.99
25 : $149.14
50 : $141.29
100 : $135.01

PE3W01589

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50. N Male Right Angle to Reverse Polarity TNC Female Cable Using LMR-400 Coax. PE3W01589 is a type N male right angle to reverse polarity TNC female cable using LMR-400 coax. This Pasternack N type male right angle to reverse polarity TNC female cable assembly uses a 50 Ohm type N for connector 1 and a 50 Ohm TNC for connector 2. type N right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N type right angle to reverse polarity female TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01589 type N male right angle to TNC reverse polarity female cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W15863

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. 4.3-10 Male to N Male Cable Using LMR-400 Coax. PE3W15863 is a 4.3-10 male to N male cable using LMR-400 coax. This Pasternack 4.3-10 male to N male cable assembly uses a 50 Ohm 4.3-10 for connector 1 and a 50 Ohm N for connector 2. Our male 4.3-10 to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15863 4.3-10 male to N male cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems.

PE34158-12

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm, Length: 12 inches. N Male to N Female Bulkhead Cable 12 Inch Length Using PE-SR402AL Coax., Radio frequency assembly N male to N female bulkhead cable 12 inch length using PE-SR402AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N female bulkhead cable 12 inch length using PE-SR402AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and type N bulkhead cable connection on the other. Our N type to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to N type cable is a male to female coax assembly, PE34158-12, can also be known as a type N plug to type N jack cable assembly and will be shipped same-day as it is purchased. N type plug to type N jack cable assembly PE34158-12 is built with PE-SR402AL which is a semi-rigid coax type. The Pasternack semi-rigid N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 11 GHz maximum frequency type N male to N type female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34158-12 can also be used in the other direction and will be type N female bulkhead to type N male cable assembly if the opposite connectivity is required. Type N plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female bulkhead cable 12 inch length using PE-SR402AL coax.

1 : $160.99
25 : $152.94
50 : $144.89
100 : $138.45

PE36158-72

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 72 inches. SMP Female to SMP Female Right Angle Cable 72 Inch Length Using RG405 Coax., Radio frequency assembly SMP female to SMP female right angle cable 72 inch length using RG405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMP female to SMP female right angle cable 72 inch length using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMP cable connection on one end and right angle SMP cable connection on the other. Our SMP to right angle SMP cable assemblies have a female gender on end 1 and female on end 2. This SMP to SMP cable is a female to female coax assembly, PE36158-72, can also be known as a SMP jack to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMP jack cable assembly PE36158-72 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to right angle SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 26.5 GHz maximum frequency SMP female to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE36158-72 can also be used in the other direction and will be right angle SMP female to SMP female cable assembly if the opposite connectivity is required. SMP jack to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female to SMP female right angle cable 72 inch length using RG405 coax.

1 : $124.99
25 : $118.74
50 : $112.49

PE38158

Pasternack Enterprises

PE3C1583LF

Pasternack Enterprises

PE3W04158LF-200CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. BNC Female Bulkhead to BNC Female Bulkhead Cable 200 CM Length Using RG58 Coax, LF Solder., Radio frequency assembly BNC female bulkhead to BNC female bulkhead cable 200 cm length using RG58 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female bulkhead to BNC female bulkhead cable 200 cm length using RG58 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC bulkhead cable connection on one end and a BNC bulkhead cable connection on the other. Our BNC to BNC cable assembly has a female gender on end 1 and a female on end 2. PE3W04158LF-200CM can also be known as a BNC jack to BNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.96-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W04158LF-200CM RF cable has a PVC (NC) jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 80 degrees C. The flexible RF cable has an in-series connection. Our bulkhead BNC female to bulkhead BNC female cable has a maximum VSWR of 1.4:1. BNC jack to BNC jack cable assembly PE3W04158LF-200CM is built with RG58 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. BNC jack bulkhead to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC RF cable assembly as per your requirements.

1 : $111.99
25 : $106.39
50 : $100.79
100 : $96.31

PE3W14158

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. TNC Female to N Male Right Angle Cable Using LMR-400-UF Coax. PE3W14158 is a TNC female to N male right angle cable using LMR-400-UF coax. This Pasternack TNC female to N male right angle cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm N for connector 2. TNC to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female TNC to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14158 TNC female to N male right angle cable assembly is constructed with LMR-400-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W15832

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to 7/16 DIN Male Cable Using SPF-250 Coax. PE3W15832 is a 7/16 DIN male to 7/16 DIN male cable using SPF-250 coax. This Pasternack 7/16 DIN male to 7/16 DIN male cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm 7/16 DIN for connector 2. Our male 7/16 DIN to male 7/16 DIN cable assembly uses a corrugated cable type that is 50 Ohm. Pasternack PE3W15832 7/16 DIN male to 7/16 DIN male cable assembly is constructed with SPF-250 coax.

PE3W15839-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male to NEX10 Male Low PIM Cable 60 Inch Length Using TFT-5G-402 Coax with Times Microwave Components., Radio frequency assembly SMA male to NEX10 male low PIM cable 60 inch length using TFT-5G-402 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to NEX10 male low PIM cable 60 inch length using TFT-5G-402 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to NEX10 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a SMA cable connection on one end and a NEX10 cable connection on the other. Our low PIM SMA to NEX10 cable assembly has a male gender on end 1 and a male on end 2. PE3W15839-60 can also be known as a low PIM SMA plug to NEX10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3W15839-60 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our SMA male to NEX10 male cable has a maximum VSWR of 1.4:1. SMA plug to NEX10 plug cable assembly PE3W15839-60 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible SMA cable assembly is manufactured with SMA to NEX10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with silver plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W15839-60 can also be used in the other direction and will be a NEX10 male to SMA male cable assembly if the opposite connectivity is required. Low PIM SMA plug to NEX10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to NEX10 cable assembly for quick shipment worldwide. Variations of SMA and NEX10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to NEX10 low PIM RF cable assembly as per your requirements.

1 : $98.49
25 : $93.57
50 : $88.64
100 : $84.7

Teledyne HiRel

5962-9158503MZA

Teledyne HiRel

FIFO MEMORY, 1K X 9 PARALLEL, 65 NS ACCESS TIME
RoHS : Not Compliant

5962-9158502MZA

Teledyne HiRel

FIFO MEMORY, 1K X 9 PARALLEL, 80 NS ACCESS TIME
RoHS : Not Compliant

5962-9158506MXA

Teledyne HiRel

FIFO MEMORY, 1K X 9 PARALLEL, 30 NS ACCESS TIME
RoHS : Not Compliant

5962-9158506MYA

Teledyne HiRel

FIFO MEMORY, 1K X 9 PARALLEL, 30 NS ACCESS TIME
RoHS : Not Compliant

5962-9158501MYA

Teledyne HiRel

FIFO MEMORY, 1K X 9 PARALLEL, 120 NS ACCESS TIME
RoHS : Not Compliant

5962-9158503MUA

Teledyne HiRel

FIFO MEMORY, 1K X 9 PARALLEL, 65 NS ACCESS TIME
RoHS : Not Compliant

5962-9158503MYA

Teledyne HiRel

FIFO MEMORY, 1K X 9 PARALLEL, 65 NS ACCESS TIME
RoHS : Not Compliant

5962-9158501MZA

Teledyne HiRel

FIFO MEMORY, 1K X 9 PARALLEL, 120 NS ACCESS TIME
RoHS : Not Compliant

5962-9158506MUA

Teledyne HiRel

FIFO MEMORY, 1K X 9 PARALLEL, 30 NS ACCESS TIME
RoHS : Not Compliant

5962-9158505MYA

Teledyne HiRel

FIFO MEMORY, 1K X 9 PARALLEL, 40 NS ACCESS TIME
RoHS : Not Compliant

5962-9158504MXA

Teledyne HiRel

FIFO MEMORY, 1K X 9 PARALLEL, 50 NS ACCESS TIME
RoHS : Not Compliant

5962-9158504MUA

Teledyne HiRel

FIFO MEMORY, 1K X 9 PARALLEL, 50 NS ACCESS TIME
RoHS : Not Compliant

5962-9158505MXA

Teledyne HiRel

FIFO MEMORY, 1K X 9 PARALLEL, 40 NS ACCESS TIME
RoHS : Not Compliant

5962-9158504MZA

Teledyne HiRel

FIFO MEMORY, 1K X 9 PARALLEL, 50 NS ACCESS TIME
RoHS : Not Compliant

5962-9158504MYA

Teledyne HiRel

FIFO MEMORY, 1K X 9 PARALLEL, 50 NS ACCESS TIME
RoHS : Not Compliant

Venkel Ltd.

MELFC0102-UC-1583DT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/5W;�50PPM;158K;�0.5%
RoHS : Compliant

MELFC0204-TE-1581FT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�25PPM;1.58K;�1%
RoHS : Compliant

MELFC0204-ZE-1581DT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�25PPM;1.58K;�0.5%
RoHS : Compliant

MELFC0207-VE-1582FT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�25PPM;15.8K;�1%
RoHS : Compliant

MELFC0207-XC-1580BT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�50PPM;158R;�0.1%
RoHS : Compliant

MELFC0207-XZ-1583FT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�15PPM;158K;�1%
RoHS : Compliant

MELFM0204-TE-1580CT

VENKEL LTD

MELF Molded Thin Film CR;0204;1/4W;�25PPM;158R;�0.25%
RoHS : Not Compliant

MELFM0207-VE-1581CT

VENKEL LTD

MELF Molded Thin Film CR;0207;1/2W;�25PPM;1.58K;�0.25%
RoHS : Not Compliant

MELFM0207-XC-1582FT

VENKEL LTD

MELF Molded Thin Film CR;0207;1W;�50PPM;15.8K;�1%
RoHS : Not Compliant

MELFM0207-XE-1582BT

VENKEL LTD

MELF Molded Thin Film CR;0207;1W;�25PPM;15.8K;�0.1%
RoHS : Not Compliant

UPTF0402-16W-P-1580BT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0402;1/16W;�5PPM;158R;�0.1%
RoHS : Compliant

UPTF0402-16W-P-1581UT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0402;1/16W;�5PPM;1.58K;�0.01%
RoHS : Compliant

UPTF0603-16W-N-1582CT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�10PPM;15.8K;�0.25%
RoHS : Compliant

UPTF1206-8W-P-1580UT

VENKEL LTD

Ultra Precision Thin Film CR;1206;1/8W;5PPM;158R;�0.01%
RoHS : Compliant

PWCR0402-AK-1581DT

VENKEL LTD

Pulse Withstanding CR;0402;1/5W;�100PPM;1.58K;�0.5%
RoHS : Compliant

Vyrian

1915893

Phoenix Contact

Strip Terminal Block, 12A, 1 Row(s), 1 Deck(s)
RoHS : Compliant

12,877

1582488

Phoenix Contact

Connector Accessory, Protective Cap, Plastic
RoHS : Compliant

10,824

SN54F158AJ

Texas Instruments

Multiplexer, F/FAST Series, 4-Func, 2 Line Input, 1 Line Output, Inverted Output, TTL, CDIP16
RoHS : Not Compliant

9,528

SNJ54ALS158FH-00

Texas Instruments

Multiplexer, ALS Series, 4-Func, 2 Line Input, 1 Line Output, Inverted Output, TTL, CQCC20

9,290

SNJ54AHCT158FKR

Texas Instruments

Multiplexer, AHCT/VHCT Series, 4-Func, 2 Line Input, 1 Line Output, Inverted Output, CMOS, CQCC20

7,385

SN15862N

Texas Instruments

NAND Gate, 15K Series, 3-Func, 3-Input, DTL, PDIP14
RoHS : Not Compliant

7,365

SN54LS158W-00

Texas Instruments

Multiplexer, LS Series, 4-Func, 2 Line Input, 1 Line Output, Inverted Output, TTL, CDFP16

6,421

LM158J/NOPB

Texas Instruments

Operational Amplifier, 2 Func, 7000uV Offset-Max, BIPolar, CDIP8
RoHS : Compliant

6,381

1915848

Phoenix Contact

Strip Terminal Block, 12A, 1 Row(s), 1 Deck(s)
RoHS : Compliant

6,372

LM158AFK

Texas Instruments

Operational Amplifier, 2 Func, 4000uV Offset-Max, BIPolar, CQCC20

5,973

R158D061FNR

Texas Instruments

5,184

SN74S158N-10

Texas Instruments

Multiplexer, S Series, 4-Func, 2 Line Input, 1 Line Output, Inverted Output, TTL, PDIP16

4,525

XC7VX690T-2LFFG1158E

AMD Xilinx

Field Programmable Gate Array, 54150 CLBs, 693120-Cell, PBGA1158
RoHS : Compliant

3,876

XC7VX550T-2FF1158I

AMD Xilinx

Field Programmable Gate Array, 1818MHz, 554240-Cell, CMOS, PBGA1156
RoHS : Not Compliant

3,195

MT5C6405C-15/883C

Micron Technology Inc

Standard SRAM, 16KX4, 15ns, CMOS, CDIP24
RoHS : Not Compliant

2,613

Waytek, Inc.

12015869

Aptiv PLC

20-18 GA Metri-Pack 630 Female 12015869 Terminal on Reel 2000/Reel

2,000 : $0.1288
10,000 : $0.1204

204,000

12015870

Aptiv PLC

Metri-Pack 630 Female 16-14 GA 12015870 Terminals on Reels
RoHS : Compliant

2,100 : $0.1365
10,500 : $0.1274

75,600

7158-3114-90

Yazaki Corp

Yazaki 2.8 Blue Cavity Plug

10 : $0.1493
50 : $0.1326
100 : $0.1207
200 : $0.1164
500 : $0.1127
1,000 : $0.1083

20,751

1816T1015-8

Unified Wire and Cable Inc

18GA Gray MTW/AWM Wire Tinned Copper 600V, 1000V UL 1015/1230/1032 CSA TEW

250 : $0.1692
500 : $0.1381
1,000 : $0.1166
2,500 : $0.1007
5,000 : $0.0904

17,250

12015869-L

Aptiv PLC

METRI-PACK 630 FEMALE 20-18 GA 12015869 LOOSE TERMINAL

50 : $0.2495
200 : $0.241
500 : $0.2241
1,000 : $0.2148

16,739

1441T1015-8

Unified Wire and Cable Inc

14GA Gray MTW/AWM Wire Tinned Copper 600V, 1000V UL 1015/1230/1032 CSA TEW

250 : $0.2074
500 : $0.1839
1,000 : $0.177
1,500 : $0.1729
5,000 : $0.1687

10,500

1626T1015-8

Unified Wire and Cable Inc

16GA Gray MTW/AWM Wire Tinned Copper 600V, 1000V UL 1015/1230/1032 CSA TEW

250 : $0.2606
500 : $0.2126
1,000 : $0.1797
2,500 : $0.1552
5,000 : $0.1393

10,000

7158-3113-40

Yazaki Corp

12-10 GA Yazaki 2.8 Cable Seal

10 : $0.1504
50 : $0.1346
100 : $0.1221
200 : $0.1177
500 : $0.1139
1,000 : $0.1095

5,995

12065158

Aptiv PLC

Weather Pack Female Tower 5 Way Round Connector

10 : $0.8969
50 : $0.8108
100 : $0.7425
200 : $0.7187
500 : $0.698
1,000 : $0.6742

3,494

7158-3111-60

Yazaki Corp

18-16 GA Yazaki 2.8 Cable Seal

10 : $0.2354
50 : $0.2107
100 : $0.1911
200 : $0.1842
500 : $0.1783
1,000 : $0.1715

2,415

7158-3083

Yazaki Corp

12 GA Yazaki 6.3 Series Black Cable Seal

5 : $0.385
50 : $0.3446
100 : $0.3125
200 : $0.3013
500 : $0.2916
1,000 : $0.2804

129

7000031580

3M 7000031580 Scotch Vinyl Electrical Tape 35 is brown professional-grade 3/4" x 66' tape with 7 mil thickness and a 600VDC rating. Rated from -14F to 176F, it is flame retardant, stretches to conform around irregular shapes, and resists UV, abrasion, moisture, and solvents.

1 : $12.88
10 : $11.65
50 : $10.68
100 : $10.29
200 : $10.03
500 : $9.71

91583-1

TE Connectivity

Crimp Ratchet Tool, AMP Terminals 20-16 AWG Contacts, 38295 & 39296
RoHS : Unknown

1 : $1,257.18
10 : $1,178.02

7158-3007-10

Yazaki Corp

Yazaki 2.3II Gray Cable Seal 18-16 GA

1 : $0.7811
50 : $0.6961
100 : $0.6316
200 : $0.611
500 : $0.5904
1,000 : $0.5672

7158-3112-70

Yazaki Corp

16-14 GA Yazaki 2.8 Cable Seal

6 : $0.2354
50 : $0.2107
100 : $0.1911
200 : $0.1842
500 : $0.1783
1,000 : $0.1715

158G-AL6-R sprzedawcę

Link URL