| Zakładka z wyszukiwarką danych komponentów |
|
610T-R24-R sprzedawcę |
| sprzedawcę | Numer części | Producent | Szczegółowy opis | Price | Qty. BuyNow | |
![]() GLYN GmbH & Co. KG | IC610-0164-005-G | Yamaichi Electronics Co Ltd | Test & Burn It Socket 48 pin | 50 | ||
| LM961-0651 | LM Technologies | Bluetooth Smart Ready Dual Mode Module Programmab | 44 | |||
| SGM4056-10.5YPS8G/TR | SG Micro Corp | High Input Voltage Charger | 18 | |||
![]() Braemac Americas-Symmetry | XU316-1024-FB265-C24 | XMOS Ltd |
| 0 | ||
| AOTA-N201610S-4R7MT | Abracon Corporation |
| 0 | |||
| AOTA-N201610S-R47MT | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AOTA-B201610SR68MT | Abracon Corporation | RoHS : Compliant |
| 0 | ||
ASPI-U201610-R24M-T![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
AIUR-06-101K![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| XU316-1024-TQ128-I24 | XMOS Ltd |
| 0 | |||
| XU316-1024-QF60A-C32 | XMOS Ltd |
| 0 | |||
| IRIS-W106-10B | u-blox AG | Wireless tri-radio MCU module, Wi-Fi 6, 2.4 & 5 GHz, Bluetooth LE 5.3, Thread, open CPU, 16 MB flash, Arm Cortex M33 MCU, antenna pin |
| 0 | ||
| GW16103 | Gateworks Corporation | SIM, USB, uSD Expansion Module |
| 0 | ||
AIUR-06-103K![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
ASPI-U201610-R12M-T![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ATL-1Z090610SR12LT | Abracon Corporation | RoHS : Compliant |
| 0 | ||
AIRD-06-100K![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| MCA3.J0610J | Taoglas Antenna Solutions | mmWave Cable Assembly (Rated to 40GHz) with 610mm (24") GORE3506 and 2.92(M) to 2.92(M) |
| 0 | ||
![]() Pasternack Enterprises US | PE3W17610/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: QMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Female Bulkhead to QMA Male Right Angle Cable 36 Inch Length Using RG142 Coax with HeatShrink., Radio frequency assembly N female bulkhead to QMA male right angle cable 36 inch length using RG142 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N female bulkhead to QMA male right angle cable 36 inch length using RG142 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to QMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N bulkhead cable connection on one end and a right angle QMA cable connection on the other. Our type N to right angle QMA cable assembly has a female gender on end 1 and a male on end 2. PE3W17610/HS-36 can also be known as a type N jack to right angle QMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.97-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17610/HS-36 RF cable has a FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 70 dB. Type N jack to QMA plug cable assembly PE3W17610/HS-36 is built with RG142 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle QMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/crimp attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W17610/HS-36 can also be used in the other direction and will be a right angle QMA male to type N female bulkhead cable assembly if the opposite connectivity is required. Type N jack bulkhead to QMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to QMA cable assembly for quick shipment worldwide. Variations of type N and QMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to QMA RF cable assembly as per your requirements. |
| 233 | |
| PE3FCA076-10M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 60 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: APC, Connector 2 Series: LC, Connector 2 Polish Type: APC, Jacket Burn Rating: OFNR, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 300, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Duplex LC APC to LC APC, SM OS2, 2.0mm Riser, Yellow - 10 meter. Pasternack’s PE3FCA076-10M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long patch cable assembly is equipped with duplex LC/APC to LC/APC connectors. Our yellow fiber optic cable has a riser (OFNR) rated PVDF jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This patch cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA076-10M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. Pasternack has one of the largest in-stock selections of LC/APC to LC/APC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 83 | ||
| PE610-06303 | Pasternack Enterprises | Key Specifications, Chain Option: Chain. TRB 3-Slot RFO Dust Cap With 6.0-Inch Brass Chain. Pasternack’s PE610-06303 RF coaxial connector cap (which can also be referred to as an RF connector dust cap in some cases) is available in a design. This RF connector cap has a connector series and a gender. Our connector cap is manufactured with a brass body material and nickel body plating. Our nickel-plated dust cap comes with a 6-inch long chain to prevent loss and misplacement. Our PE610-06303 dust cap has a length of 0.811 inches, a width of 0.571 inches, and a height of 0.571 inches. These RF connector dust caps are essential for precision connectors to protect them from dust, corrosion, and other potential damage. Additional dimensions and specifications for this connector cap are on our downloadable PDF datasheet above. Our coaxial protective dust cap is just one part of over one million RF components supplied by Pasternack. The PE610-06303 connector dust cap is in stock and will ship on the same business day as purchased. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal RF connector dust cap for your requirements. |
| 62 | ||
| PE3W05610-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length: 12 inches. Reverse Polarity TNC Female Bulkhead to Reverse Polarity TNC Male Cable 12 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly reverse polarity TNC female bulkhead to reverse polarity TNC male cable 12 inch length using PE-SR402FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Reverse polarity TNC female bulkhead to reverse polarity TNC male cable 12 inch length using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity TNC bulkhead cable connection on one end and reverse polarity TNC cable connection on the other. Our reverse polarity TNC to reverse polarity TNC cable assemblies have a female gender on end 1 and male on end 2. This reverse polarity TNC to reverse polarity TNC cable is a female to male coax assembly, PE3W05610-12, can also be known as a reverse polarity TNC jack to reverse polarity TNC plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity TNC jack to reverse polarity TNC plug cable assembly PE3W05610-12 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable reverse polarity TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency reverse polarity TNC female bulkhead to reverse polarity TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W05610-12 can also be used in the other direction and will be reverse polarity TNC male to reverse polarity TNC female bulkhead cable assembly if the opposite connectivity is required. TNC reverse polarity jack bulkhead to TNC reverse polarity plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity TNC female bulkhead to reverse polarity TNC male cable 12 inch length using PE-SR402FLJ coax. |
| 20 | ||
| PE6102 | Pasternack Enterprises | Key Specifications, Termination Type: RF Load, Connector Series: N, Connector Gender: Female, Minimum Frequency: DC, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Maximum VSWR: 1.4:1, Maximum Power: 10 Watt. 10 Watt RF Load Up to 18 GHz With N Female Input Black Anodized Aluminum Heatsink. PE6102 10 Watts RF load (also known as termination or dummy load) has a type N connector that is female. This Pasternack 10 watts type N female load / termination is rated for a maximum frequency of 18 GHz. Our N type female termination load is a rf load termination with a 50 Ohm impedance. This type N load / coax terminator is manufactured with no chain and passivated stainless steel body. Pasternack 50 Ohm type N coaxial termination / load is RoHS compliant and has an average maximum VSWR of 1.4:1. PE6102 10 watts N type female load termination is one of over 40,000 RF, microwave and millimeter wave components in-stock at Pasternack. Our type N female 10 watts termination load will ship worldwide the same day as purchased. |
| 20 | ||
| PE6103 | Pasternack Enterprises | Key Specifications, Termination Type: RF Load, Connector Series: SMA, Connector Gender: Female, Minimum Frequency: DC, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Maximum VSWR: 1.4:1, Maximum Power: 10 Watt. 10 Watt RF Load Up to 18 GHz With SMA Female Input Black Anodized Aluminum Heatsink. PE6103 10 Watts RF load (also known as termination or dummy load) has a SMA connector that is female. This Pasternack 10 watts SMA female load / termination is rated for a maximum frequency of 18 GHz. Our SMA female termination load is a rf load termination with a 50 Ohm impedance. This SMA load / coax terminator is manufactured with no chain and passivated stainless steel body. Pasternack 50 Ohm SMA coaxial termination / load is RoHS compliant and has an average maximum VSWR of 1.4:1. PE6103 10 watts SMA female load termination is one of over 40,000 RF, microwave and millimeter wave components in-stock at Pasternack. Our SMA female 10 watts termination load will ship worldwide the same day as purchased. |
| 10 | ||
| PE7486-10 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 26.5 GHz, Nominal Attenuation: 10 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 20 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 10 dB Fixed Attenuator, SMA Male to SMA Female Black Anodized Aluminum Body Rated to 20 Watts Up to 26.5 GHz. PE7486-10 is a fixed 10 dB attenuator from Pasternack. This 10 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 20 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with SMA connectors is constructed with black anodized aluminum body material. The connectorized unidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 10 dB fixed attenuator has a gold-plated brass inner conductor. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 10 dB. The Pasternack PE7486-10 attenuator is rated for up to 26.5 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 10 dB attenuator has a brass connector built with nickel plating. Our fixed RF attenuator PE7486-10 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 10 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 1 | ||
| PE3C5610 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.0/2.3, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. 1.0/2.3 Plug Right Angle to SMA Male Cable Using RG316 Coax., Radio frequency assembly 1.0/2.3 plug right angle to SMA male cable using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 1.0/2.3 plug right angle to SMA male cable using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle 1.0/2.3 cable connection on one end and SMA cable connection on the other. Our right angle 1.0/2.3 to SMA cable assemblies have a plug gender on end 1 and male on end 2. This 1.0/2.3 to SMA cable is a plug to male coax assembly, PE3C5610, can also be known as a right angle 1.0/2.3 male to SMA plug cable assembly and will be shipped same-day as it is purchased. 1.0/2.3 male to SMA plug cable assembly PE3C5610 is built with RG316 which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with right angle 1.0/2.3 to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency 1.0/2.3 right angle plug to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5610 can also be used in the other direction and will be SMA male to right angle 1.0/2.3 plug cable assembly if the opposite connectivity is required. 1.0/2.3 right angle male to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to SMA cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 1.0/2.3 plug right angle to SMA male cable using RG316 coax. | 0 | |||
| PE3W16104LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402TN, RF Cable Type: RG402 Tinned, RF Cable Impedance: 50 Ohm. SMA Male to SMA Female Cable Using Tinned RG402 Coax, LF Solder. PE3W16104LF is a SMA male to SMA female cable using RG402 Tinned coax. This Pasternack SMA male to SMA female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to female SMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W16104LF SMA male to SMA female cable assembly is constructed with RG402 Tinned coax. | 0 | |||
| PE3W18610/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm. UHF Male to N Male Cable Using LMR-195-UF Coax with HeatShrink. PE3W18610/HS is a UHF male to N male cable using LMR-195-UF coax. This Pasternack UHF male to N male cable assembly uses a 50 Ohm UHF for connector 1 and a 50 Ohm N for connector 2. Our male UHF to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18610/HS UHF male to N male cable assembly is constructed with LMR-195-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W11610/PH90 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. N Male Right Angle to TNC Male Right Angle Cable Using LMR-400 Coax with 90 Deg. Clock. PE3W11610/PH90 is a N male right angle to TNC male right angle cable using LMR-400 coax. This Pasternack N male right angle to TNC male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. N right angle to TNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male TNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W11610/PH90 N male right angle to TNC male right angle cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W13610LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMB Plug to BNC Female Cable Using LMR-100 Coax, LF Solder. PE3W13610LF is a SMB plug to BNC female cable using LMR-100A coax. This Pasternack SMB plug to BNC female cable assembly uses a 50 Ohm SMB for connector 1 and a 50 Ohm BNC for connector 2. Our plug SMB to female BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13610LF SMB plug to BNC female cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W17610 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. N Female Bulkhead to QMA Male Right Angle Cable Using RG142 Coax. PE3W17610 is a N female bulkhead to QMA male right angle cable using RG142 coax. This Pasternack N female bulkhead to QMA male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm QMA for connector 2. N to QMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female N bulkhead to male QMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17610 N female bulkhead to QMA male right angle cable assembly is constructed with RG142 coax. | 0 | |||
| PE3W26106 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to TNC Male Cable Using RG402 Coax. PE3W26106 is a SMA male right angle to TNC male cable using RG402 coax. This Pasternack SMA male right angle to TNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. SMA right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to male TNC cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W26106 SMA male right angle to TNC male cable assembly is constructed with RG402 coax. | 0 | |||
| PE3C1610/HS | Pasternack Enterprises | 0 | ||||
![]() Teledyne HiRel | 5962-8766105YA![]() | Teledyne HiRel | PROM, UV ERASABLE, 16K X 8, 200 NS ACCESS TIME RoHS : Not Compliant | 0 | ||
5962-8766107YC![]() | Teledyne HiRel | PROM, UV ERASABLE, 16K X 8, 300 NS ACCESS TIME | 0 | |||
| 5962-8761001CA | Teledyne HiRel | NAND GATE, TRIPLE 3-INPUT RoHS : Not Compliant | 0 | |||
| 5962-8776101FA | Teledyne HiRel | DATA SEL/MULTIPLEXER, DUAL 4-INPUT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | |||
| 5962-9161001MKA | Teledyne HiRel | FLIP-FLOP, D-TYPE, 9-BIT, POS. EDGE-TRIGGERED, TTL-COMP INPUTS, TS-OUTPUTS RoHS : Not Compliant | 0 | |||
| 5962-8766102YC | Teledyne HiRel | PROM, UV ERASABLE, 16K X 8, 120 NS ACCESS TIME | 0 | |||
| 5962-8766105XA | Teledyne HiRel | PROM, UV ERASABLE, 16K X 8, 200 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-8766103YA![]() | Teledyne HiRel | PROM, UV ERASABLE, 16K X 8, 150 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-87761012A | Teledyne HiRel | DATA SEL/MULTIPLEXER, DUAL 4-INPUT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | |||
| 5962-8766103XA | Teledyne HiRel | PROM, UV ERASABLE, 16K X 8, 150 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-87610012A | Teledyne HiRel | NAND GATE, TRIPLE 3-INPUT RoHS : Not Compliant | 0 | |||
5962-8766107YA![]() | Teledyne HiRel | PROM, UV ERASABLE, 16K X 8, 300 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8766106YA | Teledyne HiRel | PROM, UV ERASABLE, 16K X 8, 250 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8766104YC | Teledyne HiRel | PROM, UV ERASABLE, 16K X 8, 170 NS ACCESS TIME | 0 | |||
5962-8766107XA![]() | Teledyne HiRel | PROM, UV ERASABLE, 16K X 8, 300 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
![]() Venkel Ltd. | TFCR0402-16W-E-3610FT | VENKEL LTD | Thin Film CR;0402;1/16W;�25PPM;361R;�1% RoHS : Compliant | 0 | ||
| CRG2010-V-2610FT | VENKEL LTD | RoHS 10/10 Green CR;2010;1/2W;261R;�1% RoHS : Compliant | 0 | |||
| TFCR0603-16W-E-3610BT-1K | VENKEL LTD | Thin Film CR;0603;1/16W;�25PPM;361R;�0.1% RoHS : Compliant | 0 | |||
| TFCR0805-8W-C-3610CT-1K | VENKEL LTD | Thin Film CR;0805;1/8W;�50PPM;361R;�0.25% RoHS : Compliant | 0 | |||
| TFCR0805-8W-E-3610DT | VENKEL LTD | Thin Film CR;0805;1/8W;�25PPM;361R;�0.5% RoHS : Compliant | 0 | |||
| TFCR0805-8W-K-2610DT-1K | VENKEL LTD | Thin Film CR;0805;1/8W;�100PPM;261R;�0.5% RoHS : Compliant | 0 | |||
| TFCR1206-4W-E-2610BT-1K | VENKEL LTD | Thin Film CR;1206;1/4W;�25PPM;261R;�0.1% RoHS : Compliant | 0 | |||
| TFCR2512-2W-C-2610DT | VENKEL LTD | Thin Film CR;2512;1/2W;�50PPM;261R;�0.5% RoHS : Compliant | 0 | |||
| UPTF0402-16W-N-2610CT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�10PPM;261R;�0.25% RoHS : Compliant | 0 | |||
| UPTF0603-16W-E-3610AT | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�25PPM;361R;�0.05% RoHS : Compliant | 0 | |||
| UPTF0603-16W-N-2610UT | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�10PPM;261R;�0.01% RoHS : Compliant | 0 | |||
| UPTF0805-10W-N-2610CT | VENKEL LTD | Ultra Precision Thin Film CR;0805;1/10W;�10PPM;261R;�0.25% RoHS : Compliant | 0 | |||
| UPTF1206-8W-N-3610AT | VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;10PPM;361R;�0.05% RoHS : Compliant | 0 | |||
| UPTF2010-2W-P-2610DT | VENKEL LTD | Ultra Precision Thin Film CR;2010;1/2W;�5PPM;261R;�0.5% RoHS : Compliant | 0 | |||
| CR2010-1W-2610FT | VENKEL LTD | Chip Resistor;2010;1W;261R;�1% RoHS : Compliant | 0 |
| Czy Alldatasheet okazała się pomocna? [ DONATE ] |
O Alldatasheet | Reklama | Kontakt | Polityka prywatności | Link do karty katalogowej | Linki | Lista producentów All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |