 |
Zakładka z wyszukiwarką danych komponentów |
|
|
Zakładka z wyszukiwarką danych komponentów |
|
8001G-R20-R sprzedawcę |
| sprzedawcę | Numer części | Producent | Szczegółowy opis | Price | Qty. BuyNow | |
 Avnet Americas | 68001-204HLF | Amphenol Corporation | - Bag (Alt: 68001-204HLF) RoHS : Compliant | 10,500 | ||
| M12A-04PMMP-SF8001 | Amphenol Corporation | - Trays (Alt: M12A-04PMMP-SF8001) RoHS : Compliant |
| 1,388 | ||
| 10120818-001C-TRLF | Amphenol Corporation | - Tape and Reel (Alt: 10120818-001C-TRLF) RoHS : Compliant |
| 1,350 | ||
| RN55C8001BB14 | Vishay Intertechnologies | - Bulk (Alt: RN55C8001BB14) RoHS : Not Compliant |
| 1,000 | ||
| UA-20PMFP-SC8001 | Amphenol Corporation | USB Sealed Connector, Solder, USB Type A, USB 2.0, Plug, 4 Position, Panel Mount, IP68 - Trays (Alt: UA-20PMFP-SC8001) RoHS : Compliant |
| 278 | ||
| M12A-05PFFS-SF8001 | Amphenol Corporation | - Trays (Alt: M12A-05PFFS-SF8001) RoHS : Compliant |
| 135 | ||
| M8S-04PMMR-SF8001 | Amphenol Corporation | - Trays (Alt: M8S-04PMMR-SF8001) RoHS : Compliant |
| 100 | ||
| BD-06RMFS-QC8001 | Amphenol Corporation | Conn Circular SKT 6 POS Solder Cup ST Panel Mount 6 Terminal 1 Port - Trays (Alt: BD-06RMFS-QC8001) RoHS : Compliant |
| 100 | ||
| SDB-15PFFP-SL8001 | Amphenol Corporation | - Trays (Alt: SDB-15PFFP-SL8001) RoHS : Compliant |
| 100 | ||
| VENT-PS1NBK-N8001 | Amphenol Corporation | - Bulk (Alt: VENT-PS1NBK-N8001) RoHS : Compliant |
| 85 | ||
| RJS-12D04FF-RS8001 | Amphenol Corporation | - Bulk (Alt: RJS-12D04FF-RS8001) RoHS : Compliant |
| 50 | ||
| 183398-001 REV ZY4 | Amphenol Corporation | - Bulk (Alt: 183398-001 REV ZY4) RoHS : Not Compliant | 49 | |||
| MRJ578001 | Amphenol Corporation | - Boxed Product (Development Kits) (Alt: MRJ578001) RoHS : Not Compliant |
| 24 | ||
| M12A-12PMMP-SF8001 | Amphenol Corporation | - Trays (Alt: M12A-12PMMP-SF8001) RoHS : Compliant |
| 8 | ||
| M49142/08-0017 | Bel Fuse | - Bag (Alt: M49142/08-0017) RoHS : Compliant |
| 3 | ||
 Newark | 10129380-908001ALF | Amphenol Communications Solutions | Conn, Header, 8Pos, 1Row, 2.54Mm; |Amphenol Communications Solutions 10129380-908001ALF RoHS : Compliant |
| 1,460 | |
| ZW-06-12-T-S-800-115 | Samtec Inc | Conn Stack Brd, 2.54Mm, 6Pos, Hdr; |Samtec, Inc. ZW-06-12-T-S-800-115 RoHS : Compliant |
| 261 | ||
| 38780-0104 | Molex | Terminal Block, Barrier, 4Pos, 14Awg; No. Of Rows:2 Row; No. Of Positions:4Positions; Wire Size Awg Min:22Awg; Wire Size Awg Max:14Awg; Pitch Spacing:11.11Mm; Rated Current:15A; Rated Voltage:300V; Product Range:38780 Series Rohs Compliant: Yes RoHS : Compliant |
| 222 | ||
| WCK-280-01A4-RT | Essentra Components | Cable Clamp, Nylon 6.6, Natural, 19Mm; Cable Clamp/Clip Type:Adhesive Backed Cable Clamp; Internal Diameter:-; Cable Clamp/Clip Material:Nylon 6.6 (Polyamide 6.6); Cable Clamp/Clip Colour:Natural; External Length:19Mm Rohs Compliant: Yes RoHS : Compliant |
| 131 | ||
| 1SNG608001R0000 | TE Connectivity | Gland Locknut, Brass, M12, 2.8Mm; |Te Connectivity Entrelec 1SNG608001R0000 RoHS : Compliant |
| 108 | ||
| PXMBNI78FPM03AFL78001 | Bulgin | Cable Assy, 7/8" Plug-Free End, 100Mm; |Bulgin Limited PXMBNI78FPM03AFL78001 RoHS : Compliant |
| 65 | ||
| 380-015-103L001 | NorComp | Micro D-Sub Conn, Plug, 15Pos/Solder Cup; D Sub Connector Type:Micro D; Gender:Plug; Product Range:380 Series; No. Of Contacts:15Contacts; D Sub Shell Size:-; Contact Termination Type:Solder Cup; Connector Mounting:Panel Mount Rohs Compliant: Yes RoHS : Compliant |
| 64 | ||
| 10129380-908001ALF | Amphenol Communications Solutions | Conn, Header, 8Pos, 1Row, 2.54Mm; |Amphenol Communications Solutions 10129380-908001ALF RoHS : Compliant |
| 56 | ||
| PXMBNI78FPM03AFL78001 | Bulgin | Sens Cbl 7/8" Plug Free End 3 Positions; |Bulgin Limited PXMBNI78FPM03AFL78001 RoHS : Compliant |
| 50 | ||
| VENT-PS1NGY-O8001 | Amphenol LTW Technology | Vent, M12 Sensor Connector, Grey; |Amphenol Ltw VENT-PS1NGY-O8001 RoHS : Compliant |
| 17 | ||
| 783480-01 | NI | Test Accessory, 5V Active Gps Antenna; |Ni/emerson 783480-01 RoHS : Compliant |
| 8 | ||
| KM1-098-001-923-008 | ODU Steckverbindungssysteme Gmbh & Co Kg | Box Spanner, Rcpt Front Nuts, G5/G6/G8; |Odu-Usa KM1-098-001-923-008 RoHS : Compliant |
| 5 | ||
| 19.08.0015 | Rotronic-Secomp AG | Ev Cable, Iec 62196-2 Plug-Rcpt, 5M; |Roline 19.08.0015 RoHS : Compliant |
| 3 | ||
WCK-180-01A-RT | Essentra Components | Cable Clamp, Nylon 6.6, Natural, 16Mm; Cable Clamp/Clip Type:Adhesive Backed Cable Clamp; Internal Diameter:-; Cable Clamp/Clip Material:Nylon 6.6 (Polyamide 6.6); Cable Clamp/Clip Colour:Natural; External Length:16Mm Rohs Compliant: Yes RoHS : Compliant |
| 1 | ||
| 8001 | Vector Electronics & Technology Inc | Pcb, 3-Hole Pads; Board Type:Pcb, Pre-Etched Pattern; Board Material:Epoxy Glass Composite; Hole Diameter:1.067Mm; External Height:114.3Mm; External Width:165.1Mm; Board Thickness:1.57Mm; Body Material:Cem-1; Pcb Type:Circuit Board Rohs Compliant: No RoHS : Not Compliant |
| 0 | ||
 RS | 0468001.NR | Littelfuse Inc | FUSE, 1A T NON-RESETTABLE, SURFACE MOUNT, 63 V RoHS : Compliant |
| 1,263 | |
| 0218001.HXP (218001XP) | Littelfuse Inc | FUSE CYLINDER SLOW BLOW/TIME LAG 1A DIMS 5X20MM GLASS CARTRIDGE 250VAC |
| 604 | ||
| VENT-PS1NGY-O8001 | Amphenol LTW Technology | CONNECTOR, BREATHABLE VENTM12*1.5,GY,550,W/O NUT, OLEOPHOBIC, |
| 96 | ||
| VENT-PS1NBK-N8001 | Amphenol LTW Technology | CONNECTOR, BREATHABLE VENTM12*1.5,BK,1000,W/O NUT, HYDROPHOBIC, |
| 54 | ||
| X1180-01-ST202-4A | E-T-A | CIRCUIT BREAKER KIT 1077 1P PLUG 4A BREAKER/10PLUS BLK BLOCK LED 24VDC SCREW |
| 16 | ||
| MS6-SV-1/2-C-10V24-S (8001469) | Festo | SOFT START/QUICK EXHAUST VALVE |
| 13 | ||
| 05057628001 (057628) | Wera Werk Hermann Werner GmbH & Co. KG | DC IMPAKTOR TORX SERIES,10 X 25MM TORX-BITS, IMPACT |
| 10 | ||
| 118-0017 (CUSTOM-315) | Dantona Industries Inc | BATTERY, EMERGENCY LIGHTING 4.8 VOLT 800 MAH NICKEL CADMIUM |
| 7 | ||
| 0228001201U | Metal Work Pneumatic USA Inc | END PLATE, ISO 2, ISV SERIES |
| 6 | ||
| 8001 | Vector Electronics & Technology Inc | PROTOBOARD, PERFORATED, GRID 0.1X0.1",BOARD 6.5"LX4.5"WX0.062"T, HOLE-DIA 0.042" |
| 5 | ||
| 05024168001 | Wera Werk Hermann Werner GmbH & Co. KG | 967 L TORX HF L-KEY WITH HOLDING FUNCTION;BLACKLASER;TX 40 X 132 MM |
| 5 | ||
| 48-00-1450 | Milwaukee Electric Tool Corporation | SAWZALL THE TORCH DIAMOND GRIT BLADE 9-INCH |
| 4 | ||
| 2454209 (25533688) (HFI806208001NA-025RS) | RS Pro | 5/8-18 X 8 IN HEX HEAD CAP SCREW, GRADE 8, YELLOW ZINC PLATED, FINE |
| 2 | ||
| 8001 | EiKO Global LLC | 6V 4.35A S-35MM SCREW E-14 BASE |
| 0 | ||
| 8001 | 3M | ANTI-STATIC, MARK REMOVER, HARD SURFACE CLEANER, EXTRA STRENGTH, BOTTLE |
| 0 | ||
 Microchip Technology Inc | KSZ8001L | Microchip Technology Inc | 10/100 BASE-TX/FX Physical Layer Transceiver, LQFP, Projected EOL: 2036-05-12 RoHS : Compliant |
| 7,000 | |
DSC8001BL5T | Microchip Technology Inc | Unprog MEMS Oscillator, -40C-105C, 10ppm, VDFN, Projected EOL: 2046-07-19 RoHS : Compliant |
| 222 | ||
| DSC8001DI1 | Microchip Technology Inc | Unprog MEMS Oscillator, -40C-85C, 50ppm, VDFN, Projected EOL: 2040-11-18 RoHS : Compliant |
| 120 | ||
| DSC8001CL5 | Microchip Technology Inc | Unprog MEMS Oscillator, -40C-105C, 10ppm, VDFN, Projected EOL: 2041-10-07 RoHS : Compliant |
| 110 | ||
| OX-228-0019-10M0000000 | Microchip Technology Inc | OX-228-0019-10M0000000, Projected EOL: 2051-05-16 - Contact for Pricing RoHS : Compliant | 58 | |||
| DSC8001BL5 | Microchip Technology Inc | Unprog MEMS Oscillator, -40C-105C, 10ppm, VDFN, Projected EOL: 2041-10-10 RoHS : Compliant |
| 51 | ||
| DSC8001DI5 | Microchip Technology Inc | Unprog MEMS Oscillator, -40C-85C, 10ppm, VDFN, Projected EOL: 2041-01-09 RoHS : Compliant |
| 50 | ||
| OX-228-0014-10M0000000 | Microchip Technology Inc | OX-228-0014-10M0000000, Projected EOL: 2051-02-13 - Contact for Pricing RoHS : Compliant | 21 | |||
| DSC8001AI1 | Microchip Technology Inc | Unprog MEMS Oscillator, -40C-85C, 50ppm, VDFN, Projected EOL: 2041-05-28 RoHS : Compliant |
| 20 | ||
| OX-228-0012-10M0000000 | Microchip Technology Inc | OX-228-0012-10M0000000, Projected EOL: 2051-02-13 - Contact for Pricing | 20 | |||
| DSC8001AI5 | Microchip Technology Inc | Unprog MEMS Oscillator, -40C-85C, 10ppm, VDFN, Projected EOL: 2041-05-28 RoHS : Compliant |
| 15 | ||
| DSC8001BI5 | Microchip Technology Inc | Unprog MEMS Oscillator, -40C-85C, 10ppm, VDFN, Projected EOL: 2039-02-05 RoHS : Compliant |
| 8 | ||
| DSC8001CI5 | Microchip Technology Inc | Unprog MEMS Oscillator, -40C-85C, 10ppm, VDFN, Projected EOL: 2041-01-09 RoHS : Compliant |
| 8 | ||
| DSC8001AL2 | Microchip Technology Inc | Unprog MEMS Oscillator, -40C-105C, 25ppm, VDFN, Projected EOL: 2041-01-27 RoHS : Compliant |
| 6 | ||
| 160-00408-001 | Microchip Technology Inc | PACKAGE, POWER CORD,C13/NEMA 5-15, V-LOCK, STRAIGHT, EU, Projected EOL: 2051-01-13 |
| 6 | ||
 Rochester Electronics | BT137-800,127 | NXP Semiconductors | TRIAC Standard 800V 8A TO-220-3 Tube RoHS : Compliant |
| 167,058 | |
| BT138-800,127 | NXP Semiconductors | TRIAC Standard 800V 12A TO-220-3 Tube RoHS : Compliant |
| 51,820 | ||
JN5168/001,515 | NXP Semiconductors | RF Transceiver (Board Mount) TxRx + MCU 802.15.4 40-QFN T/R RoHS : Compliant |
| 713 | ||
| NUF8001MUT2G | onsemi | EMI FILTER Low Pass RC (Pi) 160MHz (Cutoff) 16-SON T/R RoHS : Compliant |
| 19,300 | ||
| FOD8001 | onsemi | Logic Output Opto-isolator 3.75kVrms Push-Pull, Totem Pole 8-SOIC Tube RoHS : Compliant |
| 13,168 | ||
| FDMT800100DC | onsemi | MOSFET N-Channel 100V 24A (Ta), 162A (Tc) 8-SON T/R RoHS : Compliant |
| 235 | ||
| FDBL0210N80-01 | onsemi | FDBL0210N80 - FET 80V 2.0 MOHM TOLL RoHS : Compliant |
| 109,186 | ||
| CY7C6800156LTXCXQLA1 | Infineon Technologies AG | USB Full-Speed Peripherals | 1,633 | |||
W180-01G | Cypress Semiconductor | Clock Generator, 28MHz, CMOS, PDSO8 RoHS : Not Compliant |
| 283 | ||
ISL80019AIRZ-T | Intersil Corporation | IC VOLT REG Adjustable Step-Down Buck 1 OUT 600mV - 5.5V 1.5A 8-SON T/R RoHS : Compliant |
| 34 | ||
PI6C980-01S | Pericom Semiconductor Corporation | Processor Specific Clock Generator, 66MHz, CMOS, PDSO28 RoHS : Not Compliant |
| 150 | ||
| ISL80015AFRZ-T7A | Renesas Electronics Corporation | IC VOLT REG Adjustable Step-Down Buck 1 OUT 600mV - 5.5V 1.5A 8-SON T/R RoHS : Compliant |
| 45 | ||
| ISL88001IH17Z-T | Renesas Electronics Corporation | Supervisory Circuit 1.67V SOT-23-3 T/R RoHS : Compliant |
| 68,813 | ||
| ATN3580-01 | Skyworks Solutions Inc | RF Attenuators 1dB Die Tray RoHS : Compliant |
| 300 | ||
| BT137-800,127 | WeEn Semiconductor Co Ltd | TRIAC Standard 800V 8A TO-220-3 Tube RoHS : Compliant |
| 250 | ||
 Sager | 8001 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding RFSHIELD | 0 | ||
| UMMA-0800-1800-1 | OMRON Electronic Components | Anti-Static Control Products BLK,0800mmx1800mm,One 4-pin,M8 | 0 | |||
| UMMYA-0800-1800-1 | OMRON Electronic Components | Anti-Static Control Products YEL,0800mmx1800mm,One 4-pin,M8 | 0 | |||
| 2077780014 | Molex | PLUG ASSY 4CKT SQUBA 3.6 UL1230 RoHS : Compliant |
| 0 | ||
| 2139380017 | Molex | Punches & Dies DIN DIE ANVIL |
| 0 | ||
| 1800115 | Phoenix Contact | Fixed Terminal Blocks MKKDSNH 1,5/ 3- 5,08 BK RoHS : Compliant |
| 0 | ||
| 1510800102 | Molex | DIMM Connectors DDR4 DIMM T/H Slim Tower .38AuLF 288Ckt |
| 0 | ||
| 1580011 | Phoenix Contact | Circular Metric Connectors Q-T-EDG-K RoHS : Compliant | 0 | |||
| 1278001100 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 1300278001 | Molex | Sensor Cables / Actuator Cables MIC 5P FP 35M ST DEVICENET | 0 | |||
| 1301800144 | Molex | Cable Mounting & Accessories BALLAST(855) COVER-YELLOW |
| 0 | ||
| 134-10-628-00-100000 | Mill-Max Mfg Corp | Headers & Wire Housings 28 PIN DIP HDR OPEN FRAME 1.070L RoHS : Compliant | 0 | |||
| 1423800-1 | TE Connectivity | General Purpose Relays T9AV1D22-22-02U | 0 | |||
| 2450R80010554 | Honeywell Sensing and Control | Thermostats | 0 | |||
| 110-80018 | HellermannTyton | EVO 9 NOSEPIECE FLUSH CUT, REPLACEMENT PART, 1/PKG |
| 0 | ||
 TME | 105-0758-001 | Bel Power Solutions | 5A; brown |
| 100 | |
| 024 800 10 | felo | Screwdriver bit: hex key; HEX 8mm; 1/4"; Overall len: 25mm |
| 24 | ||
| 0073000800100 | ALPS MAYKESTAG GmbH | Drill bit; Ø: 8mm; 5/16"; L: 400mm; steel; tungsten carbide |
| 4 | ||
| 15798001 | TE Connectivity | 15798001 |
| 3 | ||
| 0021600800100 | ALPS MAYKESTAG GmbH | Drill bit; for wood; Ø: 8mm; L: 235mm; steel CV; Holder: hexagonal |
| 0 | ||
| 0023700800100 | ALPS MAYKESTAG GmbH | Drill bit; for wood,feather; Ø: 8mm; L: 152mm; steel CV; 1/4" |
| 0 | ||
| 0025800800100 | ALPS MAYKESTAG GmbH | Drill bit; for concrete; Ø: 8mm; L: 120mm; Working part len: 80mm |
| 0 | ||
| 0057000800100 | ALPS MAYKESTAG GmbH | Drill bit; for metal,impact; Ø: 8mm; L: 117mm; high speed steel |
| 0 | ||
| 0057901800100 | ALPS MAYKESTAG GmbH | Drill bit; Ø: 18mm; L: 450mm; steel; tungsten carbide |
| 0 | ||
| 0076400800100 | ALPS MAYKESTAG GmbH | Drill bit; for concrete; Ø: 8mm; L: 210mm; metal; cemented carbide |
| 0 | ||
| 0080010120000 50 | RECA | Screw; M10; M10x120; Head: cheese head; hex key; HEX 8mm; steel |
| 0 | ||
| 0089101800100 | ALPS MAYKESTAG GmbH | Drill bit; for concrete; Ø: 18mm; L: 540mm; steel; cemented carbide |
| 0 | ||
| 0335 800 10 | RECA | Nut; hexagonal; M10; Thread: left hand thread,metric; steel; 17mm |
| 0 | ||
| 10058001 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 36; THT; 3A; 250V |
| 0 | ||
| 12-05BFIA-SL8001 | Amphenol LTW Technology | Connector: M12; socket; PIN: 5; female; industrial; M12 ALTW; angled |
| 0 | ||
 Ameya Holding Limited | F2800132RHBR | Texas Instruments | RoHS : Compliant | 1,162,568 | ||
| F2800137PM | Texas Instruments | RoHS : Compliant | 117,056 | |||
| F2800137PMR | Texas Instruments | RoHS : Compliant | 54,858 | |||
| F2800137RGZR | Texas Instruments | RoHS : Compliant | 27,950 | |||
| F2800132RGZR | Texas Instruments | RoHS : Compliant | 27,700 | |||
| F2800135RHBR | Texas Instruments | RoHS : Compliant | 23,190 | |||
| 0458001.DR | Littelfuse Inc | RoHS : Compliant | 6,000 | |||
| R8001CND3FRATL | ROHM Semiconductor | 800V 1A TO-252，带集成ESD保护二极管的车载功率MOSFET RoHS : Compliant |
| 2,500 | ||
| 0218001.MXP | Littelfuse Inc | RoHS : Compliant | 1,400 | |||
 ComSIT USA | 8,001E+15 | PRECI-DIP | AVAILABLE EU | 4,547 | ||
| EDW60053568001M50 | EDWARD | AVAILABLE EU | 132 | |||
| 80018003923 | SCOTCH MATE 3M | AVAILABLE EU | 134 | |||
| 2680014161 | GENBAND | AVAILABLE EU | 1,136 | |||
| 6366058001 | TN MANUFACTURING | AVAILABLE EU | 20 | |||
| 06978738001STD0E | CELESTICA | AVAILABLE EU | 134 | |||
ComSIT USA | Q22FA2380019500 | Seiko Instruments Inc | Electronic Component RoHS : Compliant | 30,000 | ||
| 77138001LF | Amphenol FCi | RECT CONN CONTACT Socket 26-30 AWG Crimp Gold T/R RoHS : Compliant | 20,000 | |||
| S93C86BD4HT8001 | ABLIC Inc. | Electronic Component RoHS : Compliant | 12,000 | |||
| 0218001MXP | Littelfuse Inc | TIME-LAG FUSE Electric Fuse, Time Lag Blow, 1A, 250VAC, 35A (IR), Inline/holder, 5x20mm RoHS : Compliant | 3,800 | |||
| TA8001S | Toshiba America Electronic Components | 5V VOLTAGE REGULATOR WITH RESET TIMER Fixed/Adjustable Positive Standard Regulator, 5V, BIPolar, PSIP7 RoHS : Not Compliant | 1,425 | |||
| 880015102 | Murata Manufacturing Co Ltd | RF Transceiver Module WiFi 802.11b/g/n 62-SMD T/R RoHS : Compliant | 800 | |||
| 8,001E+15 | PRECI-DIP SSA | PCB CONNECTOR-RIGHT ANGLE SOLDER TAIL SINGLE ROW Board Connector, 36 Contact(s), 1 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Black Insulator, Receptacle RoHS : Not Compliant | 505 | |||
| AMJ18800101CAT6 | ASSMANN WSW components GmbH | TELECOM AND DATACOM CONNECTOR Telecom and Datacom Connector, 8 Contact(s), Female, Right Angle, Solder Terminal, Hole .126 RoHS : Compliant | 400 | |||
| AD8001ARZREEL7 | Analog Devices Inc | 800 MHZ, 50 MILLI WATT CURRENT FEEDBACK AMPLIFIER Operational Amplifier, 1 Func, 9000uV Offset-Max, BIPolar, PDSO8 RoHS : Compliant | 180 | |||
TPS7A8001DRBR | Texas Instruments | 1 AMP LOW-NOISE, WIDE-BANDWIDTH, HIGH PSRR, LOW-DROPOUT LINEAR REGULATOR Adjustable Positive LDO Regulator, 0.8V Min, 6V Max, 0.5V Dropout, BICMOS, PDSO8 RoHS : Compliant | 135 | |||
| AD8001AR | Analog Devices Inc | 800 MHZ, 50 MILLI WATT CURRENT FEEDBACK AMPLIFIER Operational Amplifier, 1 Func, 9000uV Offset-Max, BIPolar, PDSO8 RoHS : Not Compliant | 97 | |||
| 59628688001QA | Intersil Corporation | IC INTERFACE Transceiver ARINC429 100kbps 4.75V - 5.25V 40-DIP RoHS : Not Compliant | 78 | |||
| KSZ8001L | Microchip Technology Inc | Ethernet Transceiver, 1-Trnsvr, CMOS, PQFP48 RoHS : Compliant | 49 | |||
| ISL98001CQZ170 | Intersil Corporation | Consumer Circuit, PQFP128 RoHS : Compliant | 27 | |||
| GT318001A | Globespan | Electronic Component RoHS : Not Compliant | 18 | |||
 PEI Genesis | VENT-PS1NBK-N8001 | Amphenol Corporation |
| 1,918 | ||
| MRJR538001 | Amphenol Corporation |
| 75 | |||
| M12A-12PMMP-SF8001 | Amphenol Corporation | RoHS : Compliant |
| 73 | ||
| MRJ578001 | Amphenol Corporation |
| 50 | |||
| 10-507918-001 | Amphenol Corporation |
| 0 | |||
| C146-10F008-001-12 | Amphenol Tuchel |
| 0 | |||
| 23A03508-001 | SOURIAU-SUNBANK |
| 0 | |||
| 259-8538-001 | ITT Interconnect Solutions |
| 0 | |||
| 195-8508-001 | Sure Seal Connections |
| 0 | |||
| 10-675148-001 | Amphenol Corporation |
| 0 | |||
| 23A02038-001 | SOURIAU-SUNBANK |
| 0 | |||
| MRJ538001 | Amphenol Corporation |
| 0 | |||
| M12A-08PFFS-SH8001 | Amphenol Corporation | RoHS : Compliant |
| 0 | ||
| 980-8558-001 | ITT Interconnect Solutions |
| 0 | |||
| 867218-0012 | SOURIAU-SUNBANK |
| 0 | |||
 PUI | 1080.0103 | 500 | ||||
 Chip 1 Exchange | GT3180-01-A-DB | GLOBE | INSTOCK | 40,620 | ||
| GT3180-01-A-DB | LSI Corporation | INSTOCK | 14,400 | |||
| 800-15517-0045 | INSTOCK | 4,076 | ||||
| TDA8001AT/C1 | INSTOCK | 2,930 | ||||
| 231-168/001-000 | WAGO Innovative Connections | INSTOCK RoHS : Compliant | 550 | |||
| AMJ-188-00101-CAT6 | INSTOCK | 506 | ||||
| M90598-001 | Amphenol FCi | INSTOCK | 329 | |||
| 60800-122 | nVent Schroff | INSTOCK | 297 | |||
| 0218001.MXP | Littelfuse Inc | INSTOCK RoHS : Compliant | 123 | |||
| PE63838001 | Pulse Electronics Corporation | INSTOCK | 70 | |||
| IB08-001F600 | INSTOCK | 56 | ||||
| 231-548/001-000 | INSTOCK | 40 | ||||
| IEGH66-1-62-18.0-01-V | Sensata Circuit Breakers | INSTOCK | 34 | |||
| 1800-12J | Tekelek | INSTOCK | 25 | |||
| 8001 | INSTOCK | 1 | ||||
 Avnet Abacus | M80-0130005 | Harwin | (Alt: M80-0130005) RoHS : Compliant | 143,000 | ||
| M80-0130001 | Harwin | (Alt: M80-0130001) RoHS : Compliant | 24,000 | |||
| VENT-PS1NBK-N8001 | Amphenol Corporation | (Alt: VENT-PS1NBK-N8001) RoHS : Compliant | 8,800 | |||
| 800-10-002-10-001101 | PRECI-DIP SSA | Conn Unshrouded Header HDR 2 POS 254mm Solder ST ThruHole Box (Alt: 800-10-002-10-001101) RoHS : Compliant | 6,840 | |||
| M8S-04PMMR-SF8001 | Amphenol Corporation | Conn M8 Circular PIN 4 POS Solder RA Through Hole 4 Terminal Single Port (Alt: M8S-04PMMR-SF8001) RoHS : Compliant | 5,800 | |||
| M12A-05PFFS-SF8001 | Amphenol Corporation | (Alt: M12A-05PFFS-SF8001) RoHS : Compliant | 3,000 | |||
| M12A-04BFFA-SL8001 | Amphenol Corporation | (Alt: M12A-04BFFA-SL8001) RoHS : Compliant | 2,400 | |||
| M8S-04PFFR-SF8001 | Amphenol Corporation | Conn M8 Circular Socket 4 POS Solder RA Through Hole 4 Terminal Single Port (Alt: M8S-04PFFR-SF8001) RoHS : Compliant | 2,000 | |||
| 393800102 | Molex | (Alt: 393800102) RoHS : Compliant | 1,440 | |||
| M12A-04PFFP-SF8001 | Amphenol Corporation | Sensor Connector 4 Pole M12 Receptacle M Series M12 Female 4 Positions PCB Socket (Alt: M12A-04PFFP-SF8001) RoHS : Compliant | 1,100 | |||
| UA-20PMFP-SC8001 | Amphenol Corporation | (Alt: UA-20PMFP-SC8001) RoHS : Compliant | 500 | |||
| M12A-06PMMP-SF8001 | Amphenol Corporation | (Alt: M12A-06PMMP-SF8001) RoHS : Compliant | 500 | |||
| M12A-04PMMP-SF8001 | Amphenol Corporation | Sensor Connector 4 Pole M12 Plug M Series M12 Male 4 Positions PCB Pin (Alt: M12A-04PMMP-SF8001) RoHS : Compliant | 200 | |||
| MRJ-5780-01 | Amphenol Corporation | Modular Connector RJ45 Jack 1 x 1 Port 8P8C Cat5 IP67 Through Hole Mount (Alt: MRJ-5780-01) RoHS : Compliant | 120 | |||
| MRJR-5380-01 | Amphenol Corporation | Conn Modular Jack F 8 POS 254mm Solder RA ThruHole 8 Terminal 1 Port (Alt: MRJR-5380-01) RoHS : Compliant | 40 | |||
Avnet Asia | Q22FA1280019900 | Epson Electronics America Inc | (Alt: Q22FA1280019900) RoHS : Compliant |
| 15,000 | |
| FL4800112 | Diodes Incorporated | (Alt: FL4800112) RoHS : Compliant |
| 15,000 | ||
| Q22FA2380011400 | Epson Electronics America Inc | (Alt: Q22FA2380011400) RoHS : Compliant |
| 3,000 | ||
| G88MP08001REU | Amphenol Corporation | (Alt: G88MP08001REU) RoHS : Compliant | 1,000 | |||
| G88MP180011C1EU | Amphenol Corporation | (Alt: G88MP180011C1EU) RoHS : Compliant | 800 | |||
| 0500798001 | Molex | Terminal, Socket, Wire to Board, Wire to Wire Connector, Tin, Phosphor Bronze, Cable Mount, Straight (Alt: 0500798001) RoHS : Compliant | 300 | |||
| IC13568001 | Amphenol Corporation | AMD SP5 CPU SOCKET 6096 PIN (Alt: IC13568001) RoHS : Compliant |
| 72 | ||
| MPQ800-12V67-L48NBMC | Murata Manufacturing Co Ltd | MURMPQ800-12V67-L48NBMC 40-60VIN, 12VOUT (Alt: MPQ800-12V67-L48NBMC) RoHS : Compliant |
| 5 | ||
| MPE800-12V67-L48NBMC | Murata Manufacturing Co Ltd | MURMPE800-12V67-L48NBMC 40-60VIN, 12VOUT (Alt: MPE800-12V67-L48NBMC) RoHS : Compliant | 5 | |||
| HS32838-001 | Amphenol Corporation | (Alt: HS32838-001) RoHS : Compliant |
| 4 | ||
| 2250978001 | Molex | (Alt: 2250978001) RoHS : Compliant | 0 | |||
| 10152698-001LF | Amphenol Corporation | EHPCE VR 8MP14S-10152698-001LF (Alt: 10152698-001LF) RoHS : Compliant | 0 | |||
| VENT-PS1NGY-O8001 | Amphenol Corporation | Connector Accessory, Grey, Vent, Amphenol LTW M12 Sensor Connectors (Alt: VENT-PS1NGY-O8001) RoHS : Compliant | 0 | |||
| RJHSE5380010T | Amphenol Corporation | Conn RJ45 RCP 8 POS Solder RA Through Hole 8 Terminal Single Port Tray (Alt: RJHSE5380010T) RoHS : Compliant | 0 | |||
| SS-74800-115 | Bel Fuse | (Alt: SS-74800-115) RoHS : Compliant | 0 | |||
 Avnet Silica | BT137B-800,118 | WeEn Semiconductor Co Ltd | Thyristor TRIAC 800V 71A 3Pin2Tab D2PAK TR (Alt: BT137B-800,118) RoHS : Compliant | 6,400 | ||
| BT138X-800,127 | WeEn Semiconductor Co Ltd | (Alt: BT138X-800,127) RoHS : Compliant | 6,000 | |||
| BYR29X-800,127 | WeEn Semiconductor Co Ltd | Diode Switching 800V 8A 2Pin2Tab TO220F TR (Alt: BYR29X-800,127) RoHS : Compliant | 5,000 | |||
| BT134-800,127 | WeEn Semiconductor Co Ltd | Thyristor TRIAC 800V 27A 3Pin SIP Tube (Alt: BT134-800,127) RoHS : Compliant | 4,000 | |||
| BTA140-800,127 | WeEn Semiconductor Co Ltd | Thyristor TRIAC 800V 209A 3Pin3Tab TO220AB Tube (Alt: BTA140-800,127) RoHS : Compliant | 3,000 | |||
| ISL88001IE22Z-T | Renesas Electronics Corporation | (Alt: ISL88001IE22Z-T) RoHS : Compliant | 3,000 | |||
| BYR29-800,127 | WeEn Semiconductor Co Ltd | Diode Switching 800V 8A 2Pin2Tab TO220AC Rail (Alt: BYR29-800,127) RoHS : Compliant | 2,000 | |||
| BT139-800,127 | WeEn Semiconductor Co Ltd | TRIAC 16V 800V 05mA 3Pin TO220AB Rail (Alt: BT139-800,127) RoHS : Compliant | 2,000 | |||
| BT139X-800,127 | WeEn Semiconductor Co Ltd | Thyristor TRIAC 800V 170A 3Pin3Tab TO220F Rail (Alt: BT139X-800,127) RoHS : Compliant | 2,000 | |||
| DMTH8001STLW-13 | Diodes Incorporated | (Alt: DMTH8001STLW-13) RoHS : Compliant | 1,500 | |||
| DMTH8001STLWQ-13 | Diodes Incorporated | (Alt: DMTH8001STLWQ-13) RoHS : Compliant | 1,500 | |||
| ISL80019AIRZ-T | Renesas Electronics Corporation | (Alt: ISL80019AIRZ-T) RoHS : Compliant | 0 | |||
| ISL88001IE22Z-TK | Renesas Electronics Corporation | (Alt: ISL88001IE22Z-TK) RoHS : Compliant | 0 | |||
| L213-3080016MRH001 | Lumileds | (Alt: L213-3080016MRH001) RoHS : Compliant | 0 | |||
| XEGAHR-H2-0000-000-000000H8001 | Cree, Inc. | LED Single Chip Photo Red 670nm 3A 3Pin SMD TR (Alt: XEGAHR-H2-0000-000-000000H8001) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | TRE36A480-01E03 VI | Cincon Electronics Corporation | ADAPTER AC-DC |
| 0 | |
| TR220MB480-01E13 VI | Cincon Electronics Corporation | MEDICAL ADAPTER AC-DC |
| 0 | ||
| TR36M480-01E03 VI | Cincon Electronics Corporation | Desktop MEDICAL AC Adapters |
| 0 | ||
| 33-HC997EXF-28-00-1500 | Calian | HC997EXF Extended-Filter Embedded Triple-band GNSS Helical Antenna + L-Band, 28dB, SMA straight male connector, 1500mm cable |
| 0 | ||
| NRF8001-R2Q32-R | Nordic Semiconductor | BT Low Energy Slave Connectivity Chip RoHS : Compliant |
| 0 | ||
| TRE15RD180-01G03 VI | Cincon Electronics Corporation | ADAPTER AC-DC |
| 0 | ||
| TRH220A480-01E13 VI | Cincon Electronics Corporation | ADAPTER AC-DC |
| 0 | ||
| TRH50A180-01E03 VI | Cincon Electronics Corporation | ADAPTER AC-DC |
| 0 | ||
| TRH70A480-01E03 VI | Cincon Electronics Corporation | ADAPTER AC-DC |
| 0 | ||
| TRE36A180-01G03 VI | Cincon Electronics Corporation | ADAPTER AC-DC |
| 0 | ||
| SDP800-125PA-D | Sensirion | Digital Differential Pressure Sensor, manifold mount |
| 0 | ||
| LENA-R8001M10-01C | Trasna Solutions FZ-LLC | LTE Cat 1 bis/GSM-Global with GNSS module M10, 27x30 mm, 250 pcs/reel |
| 0 | ||
| SDP800-125PA | Sensirion | Digital Differential Pressure Sensor, manifold mount RoHS : Compliant |
| 0 | ||
| TRH70A180-01E03 VI | Cincon Electronics Corporation | ADAPTER AC-DC |
| 0 | ||
| NRF8001-R2Q32-T | Nordic Semiconductor | BT Low Energy Slave Connectivity Chip RoHS : Compliant |
| 0 | ||
 Component Electronics, Inc | 2780013 | Radio Shack | IN STOCK SHIP TODAY |
| 2,500 | |
| 0038001430 | Molex | IN STOCK SHIP TODAY |
| 2,300 | ||
| 218001.M | Littelfuse Inc | IN STOCK SHIP TODAY |
| 1,230 | ||
| 68001-418 | Amphenol FCi | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 1,038 | ||
| BTE-080-01-F-D-EM2 | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant | 200 | |||
| WCK-180-01A-RT | Richco | IN STOCK SHIP TODAY |
| 182 | ||
| 38-00-1415 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 70 | ||
| 60800-122 | nVent Schroff | IN STOCK SHIP TODAY |
| 10 | ||
| 15-80-0123 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 9 | ||
AD8001ART-REEL | Analog Devices Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 6 | ||
| 2980018 | Phoenix Contact | IN STOCK SHIP TODAY RoHS : Compliant | 4 | |||
| R980-018 | Kearfott Corporation | IN STOCK SHIP TODAY | 4 | |||
| 221-380-01 | IN STOCK SHIP TODAY | 3 | ||||
| 0180-0128 | Vishay Sprague | IN STOCK SHIP TODAY | 1 | |||
| 80.010.4005.0 | Wieland Electric GmbH | IN STOCK SHIP TODAY |
| 1 | ||
 EBV Elektronik | BT134W-800,115 | WeEn Semiconductor Co Ltd | (Alt: BT134W-800,115) RoHS : Compliant | 7,000 | ||
| BTA140-800,127 | WeEn Semiconductor Co Ltd | Thyristor TRIAC 800V 209A 3Pin3Tab TO220AB Tube (Alt: BTA140-800,127) RoHS : Compliant | 5,000 | |||
| BT136S-800,118 | WeEn Semiconductor Co Ltd | (Alt: BT136S-800,118) RoHS : Compliant | 5,000 | |||
| BT138-800,127 | WeEn Semiconductor Co Ltd | (Alt: BT138-800,127) RoHS : Compliant | 4,000 | |||
| BT139B-800,118 | WeEn Semiconductor Co Ltd | (Alt: BT139B-800,118) RoHS : Compliant | 4,000 | |||
| BT137-800,127 | WeEn Semiconductor Co Ltd | Thyristor TRIAC 800V 71A 3Pin3Tab TO220AB Tube (Alt: BT137-800,127) RoHS : Compliant | 3,000 | |||
| BT137X-800,127 | WeEn Semiconductor Co Ltd | Thyristor TRIAC 800V 71A 3Pin3Tab TO220F Rail (Alt: BT137X-800,127) RoHS : Compliant | 2,000 | |||
| BT137B-800,118 | WeEn Semiconductor Co Ltd | Thyristor TRIAC 800V 71A 3Pin2Tab D2PAK TR (Alt: BT137B-800,118) RoHS : Compliant | 800 | |||
| FOD8001 | onsemi | 33V Logic Gate Optocoupler with High Noise Immunity ONSSPCISTNJZ8E4V (Alt: FOD8001) RoHS : Compliant | 0 | |||
| NUF8001MUT2G | onsemi | EMI Filter 8Channel with Integrated ESD Protection ONSSPCPRTCNIW2U6D (Alt: NUF8001MUT2G) RoHS : Compliant | 0 | |||
| FDMT800100DC | onsemi | NChannel Dual Cool 88 PowerTrench MOSFET 100V 162A 295mO (Alt: FDMT800100DC) RoHS : Compliant | 0 | |||
| BT136X-800,127 | WeEn Semiconductor Co Ltd | Thyristor TRIAC 800V 27A 3Pin3Tab TO220F Rail (Alt: BT136X-800,127) RoHS : Compliant | 0 | |||
| 5962-9800102KPA | Broadcom Limited | Optocoupler LogicOut Open Collector DCIN 2CH 8Pin CDIP (Alt: 5962-9800102KPA) RoHS : Not Compliant | 0 | |||
HTMS8001FTB/AF,115 | NXP Semiconductors | HITAG Transponder IC ISO 1178411785 ISOIEC 14223 3 Pins XSON (Alt: HTMS8001FTB/AF,115) RoHS : Compliant | 0 | |||
| AS8202B-ALQR-LQFP80-01 | Infineon Technologies AG | AS8202BALQRLQFP8001 (Alt: SP006309593) RoHS : Compliant | 0 | |||
 ECCO | MC-05BFFT-SL8001 | Amphenol LTW Technology |
| 100 | ||
| 5M2538-001 | Amphenol Aerospace |
| 2 | |||
 Flip Electronics | CY7C68001-56LTXC | Infineon Technologies AG | Stock, Ship Today |
| 8,413 | |
| CY7C68001-56LTXCT | Cypress Semiconductor | Stock | 8,413 | |||
| CY7C68001-56LTXCKG | Cypress Semiconductor | Stock | 8,413 | |||
CY7C68001-56LFXC | Cypress Semiconductor | Stock RoHS : Compliant | 8,413 | |||
| FDMT800152DC | onsemi | Stock, Ship Today RoHS : Compliant | 6,000 | |||
| ISL80019AFRZ-T | Renesas Electronics Corporation | Stock, Ship Today RoHS : Compliant |
| 4,000 | ||
| FDMT800150DC | onsemi | Stock, Ship Today RoHS : Compliant | 2,670 | |||
| FOD8001R2 | onsemi | Stock, Ship Today RoHS : Compliant |
| 2,432 | ||
JN5168/001 | NXP Semiconductors | Stock RoHS : Compliant | 2,012 | |||
| JN5168/001,515 | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 2,000 | ||
| FOD8001 | onsemi | Stock, Ship Today RoHS : Compliant |
| 865 | ||
| JN5168/001,518 | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 394 | ||
 Master Electronics | VENT-PS1NBK-N8001 | Amphenol LTW Technology | Pressure Relief Vent M12 Plastic Without Nut M12x1.5 Screw Thread > 1000ml/min at 7 kPa ePTFE (Hydrophobic) Black IP69K RoHS : Compliant |
| 1,540 | |
| VENT-PS1NGY-O8001 | Amphenol LTW Technology | Pressure Relief Vent M12 Plastic Without Nut M12x1.5 Screw Thread > 550ml/min at 7 kPa ePTFE (Oleophobic) Gray IP69K RoHS : Compliant |
| 390 | ||
| 180-015-213R911 | NorComp | Female High-Density D-Sub 15 Position Straight PCB Dip Solder RoHS : Compliant |
| 320 | ||
| 110-80018 | HellermannTyton | EVO 9 Nosepiece Flush Cut Replacement Part 1/pkg RoHS : Compliant |
| 9 | ||
| 180012JD | EECO Switch | Switch Thumb-Pushwheel Thumbwheel BCD Complement 10 1A 28VAC 28VDC PC Board Panel Mount RoHS : Compliant |
| 8 | ||
| 105-1008-001 | Johnson Components | RoHS : Compliant |
| 5 | ||
| UMMA080018001 | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| UMMYA080018001 | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| 1AB019080015 | Pulse Electronics Corporation | RoHS : Compliant |
| 0 | ||
| 2161800-1 | TE Connectivity | APT-5A TERMINATING MACHINE RoHS : Not Compliant |
| 0 | ||
| 217-1078-001-MS | ITT Interconnect Solutions | Nut PV7G-10 Jam RoHS : Not Compliant |
| 0 | ||
| 217-1378-001 | ITT Interconnect Solutions | C/n MS3456L/U 18 / 217-1378-001 / Circular RoHS : Not Compliant |
| 0 | ||
| 1800115 | Phoenix Contact | MKKDSNH 1 5/ 3-5 08 BK RoHS : Compliant |
| 0 | ||
| 151098-0010 | Molex | Conn Housing PL 10 POS 2mm Crimp ST Cable Mount Black Milli-Grid™ Tray RoHS : Compliant |
| 0 | ||
| 2450R80010554 | Honeywell Sensing and Control | THERMAL-COMMERCIAL THERMAL RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE15A8001 | Pasternack Enterprises | Key Specifications, Power Output: 14 dBm P1dB, Frequency, Min: 10 MHz, Frequency, Max: 6 GHz, Gain: 14.5 dB, Noise Figure, Max: 5.5 dB, Noise Figure, Typ: 4.5 dB, RF Input VSWR, Max: 2, Voltage, DC Min: 9 Volts, Voltage, DC Max: 15 Volts, Connector Series: SMA. 14 dBm P1dB, 10 MHz to 6 GHz, Gain Block Amplifier, 14.5 dB Gain, 26 dBm IP3, 4.5 dB NF, SMA. PE15A8001 RF gain block amplifier from Pasternack is featured in our extensive in-stock RF amplifier selection. Our connectorized gain block RF amplifier uses SMA connectors. This SMA gain block amplifier has a minimum frequency of 10 MHz, a maximum frequency of 6 GHz and a typical gain of 14.5 dB. Our radio frequency gain block amp PE15A8001 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial gain block amplifier can ship worldwide the same day of the purchase as with our other available RF parts. |
| 2 | |
| PE3W16800-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: F, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tinned Copper, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 50 Ohm SHV Jack to 75 Ohm F Male Cable 12 Inch Length Using 75 Ohm RG59 Coax., Radio frequency assembly 50 Ohm SHV jack to 75 Ohm F male cable 12 inch length using 75 Ohm RG59 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 50 Ohm SHV jack to 75 Ohm F male cable 12 inch length using 75 Ohm RG59 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SHV to type F cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SHV cable connection on one end and a type F cable connection on the other. Our SHV to type F cable assembly has a jack gender on end 1 and a male on end 2. PE3W16800-12 can also be known as a SHV female to type F plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. Our PE3W16800-12 RF cable has a PVC (NC) jacket of 0.242-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -25 to 70 degrees C. The flexible RF cable has a between series connection. Our SHV jack to type F male cable has a maximum VSWR of 1.4:1. SHV female to type F plug cable assembly PE3W16800-12 is built with RG59 which is a flexible coax type. The Pasternack flexible SHV cable assembly is manufactured with SHV to type F cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W16800-12 can also be used in the other direction and will be a type F male to SHV jack cable assembly if the opposite connectivity is required. SHV female to type F plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SHV to type F cable assembly for quick shipment worldwide. Variations of SHV and type F cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SHV to type F RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8001-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male to N Female Low PIM Cable 36 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly N male to N female low PIM cable 36 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to N female low PIM cable 36 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low PIM type N to type N cable assembly has a male gender on end 1 and a female on end 2. PE3C8001-36 can also be known as a low PIM type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.808-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. type N low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8001-36 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C8001-36 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8001-36 can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8001-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Male to N Female Low PIM Cable 48 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly N male to N female low PIM cable 48 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to N female low PIM cable 48 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low PIM type N to type N cable assembly has a male gender on end 1 and a female on end 2. PE3C8001-48 can also be known as a low PIM type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.808-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. type N low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8001-48 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C8001-48 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8001-48 can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8001-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 39.37 inches. N Male to N Female Low PIM Cable 100 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly N male to N female low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to N female low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low PIM type N to type N cable assembly has a male gender on end 1 and a female on end 2. PE3C8001-100CM can also be known as a low PIM type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.808-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. type N low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8001-100CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C8001-100CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8001-100CM can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3W08001 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. MMCX Plug to MCX Plug Right Angle Cable Using RG178 Coax. PE3W08001 is a MMCX plug to MCX plug right angle cable using RG178 coax. This Pasternack MMCX plug to MCX plug right angle cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm MCX for connector 2. MMCX to MCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMCX to plug MCX right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08001 MMCX plug to MCX plug right angle cable assembly is constructed with RG178 coax. | 0 | |||
| PE3W12800-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.2-5, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: QMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 2.2-5 Male to QMA Male Low PIM Cable 12 Inch Length Using TFT-5G-402 Coax With Times Microwave Parts., Radio frequency assembly 2.2-5 male to QMA male low PIM cable 12 inch length using TFT-5G-402 coax with Times Microwave parts from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.2-5 male to QMA male low PIM cable 12 inch length using TFT-5G-402 coax with Times Microwave parts, 2.2-5 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.2-5 to QMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 2.2-5 cable connection on one end and QMA cable connection on the other. Our low PIM 2.2-5 to QMA cable assemblies have a male gender on end 1 and male on end 2. PE3W12800-12 can also be known as a low PIM 2.2-5 plug to QMA plug cable assembly and will be shipped same-day as it is purchased. 2.2-5 plug to QMA plug cable assembly PE3W12800-12 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 2.2-5 cable assembly is manufactured with 2.2-5 to QMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency low PIM 2.2-5 male to QMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W12800-12 can also be used in the other direction and will be QMA male to 2.2-5 male cable assembly if the opposite connectivity is required. Low PIM 2.2-5 plug to QMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to QMA cable assembly for quick shipment worldwide. Variations of 2.2-5 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.2-5 male to QMA male low PIM cable 12 inch length using TFT-5G-402 coax with Times Microwave parts. |
| 0 | ||
| PE3C8001-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to N Female Low PIM Cable 60 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly N male to N female low PIM cable 60 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to N female low PIM cable 60 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low PIM type N to type N cable assembly has a male gender on end 1 and a female on end 2. PE3C8001-60 can also be known as a low PIM type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.808-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. type N low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8001-60 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C8001-60 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8001-60 can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8001-150CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 59.06 inches. N Male to N Female Low PIM Cable 150 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly N male to N female low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to N female low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low PIM type N to type N cable assembly has a male gender on end 1 and a female on end 2. PE3C8001-150CM can also be known as a low PIM type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.808-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. type N low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8001-150CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C8001-150CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8001-150CM can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8001-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male to N Female Low PIM Cable 12 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly N male to N female low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to N female low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low PIM type N to type N cable assembly has a male gender on end 1 and a female on end 2. PE3C8001-12 can also be known as a low PIM type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.808-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. type N low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8001-12 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C8001-12 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8001-12 can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE88D8001 | Pasternack Enterprises |
| 0 | |||
| PE3800-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length: 18 inches. SMA Male Right Angle to SMA Female Bulkhead Cable 18 Inch Length Using RG223 Coax., Radio frequency assembly SMA male right angle to SMA female bulkhead cable 18 inch length using RG223 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA female bulkhead cable 18 inch length using RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA bulkhead cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3800-18, can also be known as a right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3800-18 is built with RG223 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 12.4 GHz maximum frequency SMA right angle male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3800-18 can also be used in the other direction and will be SMA female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA female bulkhead cable 18 inch length using RG223 coax. |
| 0 | ||
| PE3800-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male Right Angle to SMA Female Bulkhead Cable 12 Inch Length Using RG223 Coax., Radio frequency assembly SMA male right angle to SMA female bulkhead cable 12 inch length using RG223 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA female bulkhead cable 12 inch length using RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA bulkhead cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3800-12, can also be known as a right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3800-12 is built with RG223 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 12.4 GHz maximum frequency SMA right angle male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3800-12 can also be used in the other direction and will be SMA female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA female bulkhead cable 12 inch length using RG223 coax. |
| 0 | ||
| PE3C8001 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. N Male to N Female Low PIM Cable Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly N male to N female low PIM cable using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to N female low PIM cable using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low PIM type N to type N cable assembly has a male gender on end 1 and a female on end 2. PE3C8001 can also be known as a low PIM type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.808-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. type N low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8001 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C8001 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8001 can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements. | 0 | |||
| PE3W08001/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. MMCX Plug to MCX Plug Right Angle Cable Using RG178 Coax with HeatShrink. PE3W08001/HS is a MMCX plug to MCX plug right angle cable using RG178 coax. This Pasternack MMCX plug to MCX plug right angle cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm MCX for connector 2. MMCX to MCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMCX to plug MCX right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08001/HS MMCX plug to MCX plug right angle cable assembly is constructed with RG178 coax. | 0 | |||
 Teledyne HiRel | 8001901CA | Teledyne HiRel | AND GATE, QUAD 2-INPUT, WITH OPEN-COLLECTOR OUTPUTS RoHS : Not Compliant | 0 | ||
5962-9758001QEA | Teledyne HiRel | FLIP-FLOP, JK, DUAL RoHS : Not Compliant | 0 | |||
80019012C | Teledyne HiRel | AND GATE, QUAD 2-INPUT, WITH OPEN-COLLECTOR OUTPUTS | 0 | |||
| 5962-9218001M2A | Teledyne HiRel | LATCH, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
5962-9758001Q2A | Teledyne HiRel | FLIP-FLOP, JK, DUAL RoHS : Not Compliant | 0 | |||
5962-9758001QFA | Teledyne HiRel | FLIP-FLOP, JK, DUAL RoHS : Not Compliant | 0 | |||
8001901DA | Teledyne HiRel | AND GATE, QUAD 2-INPUT, WITH OPEN-COLLECTOR OUTPUTS RoHS : Not Compliant | 0 | |||
| 80019012A | Teledyne HiRel | AND GATE, QUAD 2-INPUT, WITH OPEN-COLLECTOR OUTPUTS RoHS : Not Compliant | 0 | |||
| 5962-9218001MSA | Teledyne HiRel | LATCH, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
| 5962-9218001MRA | Teledyne HiRel | LATCH, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
 Venkel Ltd. | UPTF1206-8W-P-8001BT | VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;5PPM;8K;�0.1% RoHS : Compliant | 0 | ||
 Vyrian | LA30QS800-128 | Littelfuse Inc | Electric Fuse, Very Fast Blow, 800A, 300VAC, 300VDC, 200000A (IR), Inline/holder | 12,143 | ||
| 2800103 | Phoenix Contact | Surge Arrestors RoHS : Compliant | 11,084 | |||
Z8001BB1 | STMicroelectronics | 9,055 | ||||
| JM38510/08001S11W | Texas Instruments | 9,004 | ||||
| XF2800137RGZ | Texas Instruments | RISC Microcontroller, 32-Bit, FLASH, TMS320 CPU, 120MHz, CMOS, PQCC48 RoHS : Not Compliant | 8,892 | |||
| SN1708001DDAR | Texas Instruments | 8,535 | ||||
| M38510/38001SEA | Texas Instruments | Binary Counter, ALS Series, Synchronous, Positive Edge Triggered, 4-Bit, Up Direction, TTL, CDIP16 | 6,728 | |||
| KCS-D3800/16 | Kingston Technology Company | 5,668 | ||||
| 1200868001 | Molex | Circular Connector RoHS : Compliant | 5,561 | |||
| 1800187 | Phoenix Contact | Barrier Strip Terminal Block, 8A, 1.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 5,215 | |||
| KTM-M800/128 | Kingston Technology Company | 5,117 | ||||
| PMP8001 | Texas Instruments | 4,912 | ||||
| XF2800157QPNQ1 | Texas Instruments | RISC Microcontroller, 32-Bit, FLASH, F2800157 CPU, 120MHz, CMOS, PQFP80 RoHS : Not Compliant | 4,895 | |||
M27C800-120M1 | STMicroelectronics | RoHS : Compliant | 4,370 | |||
| 8001 | Api Technologies | Fiber Optic Biconic Connector, 126um, Single Mode, Simplex | 561 | |||
 Win Source Electronics | TPS7A8001DRBR | Texas Instruments | IC REG LDO ADJ 1A 8SON RoHS : Compliant |
| 223,700 | |
TPS78001DRVR | Texas Instruments | IC REG LDO ADJ 0.15A 6SON RoHS : Compliant |
| 114,935 | ||
| 0468001.NR | Littelfuse Inc | FUSE BOARD MNT 1A 63VAC/VDC 1206 RoHS : Compliant |
| 90,000 | ||
| F2800137PM | Texas Instruments | C2000 32-BIT MCU WITH 120 MHZ, 2 RoHS : Compliant |
| 54,000 | ||
| F2800137PMR | Texas Instruments | IC MCU 32BIT 256KB FLASH 64LQFP RoHS : Compliant |
| 50,000 | ||
| JN5168/001 | Nexperia |
| 30,000 | |||
| MP8001DS-LF-Z | Monolithic Power Systems | IC IEEE 802.3 RoHS : Compliant |
| 30,000 | ||
| AD8001ART-REEL7 | Analog Devices Inc | IC OPAMP CFA 795MHZ SOT23-5 RoHS : Not Compliant |
| 20,000 | ||
| AD8001ART-R2 | Analog Devices Inc | IC OPAMP CF LP LDIST SOT23-5 |
| 18,240 | ||
| 0458001.DR | Littelfuse Inc | Surface Mount Fuses RoHS : Compliant |
| 15,000 | ||
| 0218001.MXP | Littelfuse Inc | 218 Series, 5 x 20 mm, Time-Lag (Slo-Blo®) Fuse | FUSE GLASS 1A 250VAC 5X20MM RoHS : Compliant |
| 12,240 | ||
| JN5168-001-M05 | Nexperia |
| 1,520 | |||
| KM8F8001MM-B813 | Samsung Electronics Co. Ltd | uMCP 256GB UFS2.1 + 96Gb LPDDR4X-4266 |
| 750 | ||
| AD8001ARTZ | Analog Devices Inc | IC OPAMP CFA 795MHZ SOT23-5 RoHS : Compliant |
| 659 | ||
| KM8V8001JM-B813 | Samsung Electronics Co. Ltd | uMCP 128GB UFS2.1 + 64Gb LPDDR4X-4266 |
| 189 |
| Czy Alldatasheet okazała się pomocna? [ DONATE ] |
O Alldatasheet | Reklama | Kontakt | Polityka prywatności | Link do karty katalogowej | Linki | Lista producentów All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Polish ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Vietnamese
Indian
Mexican
British
New Zealand