 |
Zakładka z wyszukiwarką danych komponentów |
|
|
Zakładka z wyszukiwarką danych komponentów |
|
8003TBC-R1 sprzedawcę |
| sprzedawcę | Numer części | Producent | Szczegółowy opis | Price | Qty. BuyNow | |
 Avnet Americas | 89485-8003 | Molex | Conn USB RCP 4 POS 1.4mm Solder RA Thru-Hole 4 Terminal 1 Port Tray - Trays (Alt: 0894858003) RoHS : Compliant |
| 13,600 | |
| 39880-0302 | Molex | Wire-To-Board Terminal Block, 2 Positions, 5.08mm, 30 AWG to 12 AWG, 1.5mm2, Screw, 13.5A, 300 V - Bulk (Alt: 0398800302) RoHS : Not Compliant |
| 3,701 | ||
| 39880-0303 | Molex | Wire-To-Board Terminal Block, 3 Ways, 5.08mm, 30 AWG to 16 AWG, 1.5mm2, Screw, 13.5A, 300 V, THT RA - Bulk (Alt: 0398800303) RoHS : Compliant |
| 520 | ||
| 39880-0304 | Molex | Wire-To-Board Terminal Block, 4 Ways, 5.08mm, 30 AWG to 16 AWG, 1.5mm2, Screw, 13.5A, 300 V, THT RA - Bag (Alt: 0398800304) RoHS : Compliant |
| 400 | ||
| 5800-331-RC | Bourns Inc | - Trays (Alt: 5800-331-RC) RoHS : Compliant |
| 253 | ||
| ASSR-1218-003E | Broadcom Limited | Relay SSR 20mA 1.6V DC 200mA 60V AC/DC 4-Pin SOIC Tube - Trays (Alt: ASSR-1218-003E) RoHS : Compliant |
| 121 | ||
| 183398-003 REV ZY4 | Amphenol Corporation | - Bulk (Alt: 183398-003 REV ZY4) RoHS : Not Compliant | 54 | |||
| 10-588003-032 | Amphenol Corporation | - Bulk (Alt: 10-588003-032) RoHS : Not Compliant |
| 6 | ||
| ZW-05-13-S-S-800-388 | Samtec Inc | - Bulk (Alt: ZW-05-13-S-S-800-388) RoHS : Compliant |
| 0 | ||
| 300H-P2B-08.00-3S-A-080-0.305 | TE Connectivity | 300H-P2B-08.00-3S-A-080-0.305: CTO-13500 - Boxed Product (Development Kits) (Alt: 20034796-00) RoHS : Not Compliant |
| 0 | ||
| 637E18003I3T | CTS Corporation | - Tape and Reel (Alt: 637E18003I3T) RoHS : Compliant |
| 0 | ||
| 653E18003I3T | CTS Corporation | - Tape and Reel (Alt: 653E18003I3T) RoHS : Compliant |
| 0 | ||
| 653L18003C2T | CTS Corporation | - Tape and Reel (Alt: 653L18003C2T) RoHS : Compliant |
| 0 | ||
| 8-1971800-3 | TE Connectivity | - Bag (Alt: 8-1971800-3) RoHS : Compliant |
| 0 | ||
| 800337-SF | TE Connectivity | - Boxed Product (Development Kits) (Alt: 800337-SF) RoHS : Not Compliant |
| 0 | ||
 Newark | ASSR-4118-003E | Broadcom Limited | Ssr, 0.1A, 400V, So4; |Broadcom ASSR-4118-003E RoHS : Compliant |
| 3,375 | |
| MCSJK-3N-48.00-3.3-25-B | SPC Multicomp | Oscillator, 48Mhz, 3.2Mm X 2.5Mm, Cmos; |Multicomp Pro MCSJK-3N-48.00-3.3-25-B RoHS : Compliant |
| 1,510 | ||
| MCSJK-3N-48.00-3.3-25-B | SPC Multicomp | Oscillator, 48Mhz, 3.2Mm X 2.5Mm, Cmos; |Multicomp Pro MCSJK-3N-48.00-3.3-25-B RoHS : Compliant |
| 1,510 | ||
| MCSJK-3N-8.00-3.3-50-B | SPC Multicomp | Oscillator, 8Mhz, 3.2Mm X 2.5Mm, Cmos; |Multicomp Pro MCSJK-3N-8.00-3.3-50-B RoHS : Compliant |
| 1,194 | ||
| 971800321 | Wurth Elektronik | Standoff, Hex Male-Female, 80Mm, M3; |Würth Elektronik 971800321 RoHS : Compliant |
| 664 | ||
| ZW-05-13-S-S-800-388 | Samtec Inc | Conn Stack Brd, 2.54Mm, 5Pos, Hdr; |Samtec, Inc. ZW-05-13-S-S-800-388 RoHS : Compliant |
| 269 | ||
| 0438003.WRGT | Littelfuse Inc | Smd Fuse, Fast Acting, 3A, 12Vac; |Littelfuse 0438003.WRGT RoHS : Compliant |
| 135 | ||
| 0438003.WRGT | Littelfuse Inc | Smd Fuse, Fast Acting, 3A, 12Vac; |Littelfuse 0438003.WRGT RoHS : Compliant |
| 135 | ||
| 800307 | Phoenix Contact | Marker Carrier, Group Of Terminal; |Phoenix Contact 800307 RoHS : Compliant |
| 120 | ||
| HD18-003 | TE Connectivity | Strain Relief, Size 3, Plastic; |Te Connectivity Deutsch HD18-003 RoHS : Compliant |
| 21 | ||
| FMCA2800-36 | Fairview Microwave Inc | Coax Cable Assembly; |Fairview Microwave FMCA2800-36 RoHS : Not Compliant |
| 10 | ||
| 28.0033-030-21 | Stäubli Electrical Connectors | Test Lead, Blk, 300Mm, 60V, 10A; |Staubli 28.0033-030-21 RoHS : Compliant |
| 6 | ||
| T4151420008-003 | TE Connectivity | Sensor Cord, 8P, M12 Rcpt-Free End, 1.5M; Connector Type A:90° M12 Receptacle; Connector Type B:Free End; No. Of Positions:8 Positions; Cable Length - Metric:1.5M; Cable Length - Imperial:4.9Ft; Product Range:T415 Series Rohs Compliant: Yes RoHS : Compliant |
| 2 | ||
| 8003 | Thomas & Betts | 20A Rec 2P3W Se 125V Fc; |Abb Thomas & Betts 8003 RoHS : Not Compliant |
| 0 | ||
| 8003 | Vector Electronics & Technology Inc | Pcb, Pad/Hole And Ground Plane; Board Type:Pcb, Pad Per Hole; Board Material:Epoxy Glass Composite; Hole Diameter:1.067Mm; External Height:114.3Mm; External Width:165.1Mm; Board Thickness:1.57Mm; Body Material:Cem-1; Pin Capacity:60 Rohs Compliant: No RoHS : Not Compliant |
| 0 | ||
 Analog Devices Inc | MAX234EWE+C78003 | Analog Devices Inc | +5V-Powered, Multichannel RS-2 RoHS : Compliant | 1,000 | ||
| LTM8003IY | Analog Devices Inc | 40VIN,3.5A Buck SilentSwitcher RoHS : Not Compliant |
| 536 | ||
AD8003ACPZ-REEL7 | Analog Devices Inc | 1.4 GHz Op_Amp w/disable Tripl RoHS : Compliant |
| 119 | ||
| LTM8003HY | Analog Devices Inc | 40VIN,3.5A Buck SilentSwitcher RoHS : Not Compliant |
| 46 | ||
| AD8003ACP-EBZ | Analog Devices Inc | AD8003ACP_EBZ_A00908_EB-O24CP4 RoHS : Compliant |
| 36 | ||
| LTM8003HY-3.3#PBF | Analog Devices Inc | 40VIN,3.5A Buck SilentSwitcher RoHS : Compliant |
| 19 | ||
| LTM8003IY-3.3#PBF | Analog Devices Inc | 40VIN,3.5A Buck SilentSwitcher RoHS : Compliant |
| 0 | ||
| LTM8003IY#PBF | Analog Devices Inc | 40VIN,3.5A Buck SilentSwitcher RoHS : Compliant |
| 0 | ||
| LTM8003HY#PBF | Analog Devices Inc | 40VIN,3.5A Buck SilentSwitcher RoHS : Compliant |
| 0 | ||
 RS | 0800374 (WMS 3 2 (30X5)R) | Phoenix Contact | SHRINK TUBING, POLYOLEFIN, 3:1, 30 MM, WHITE, THERMOMARK, WMS SERIES |
| 58 | |
| FN284-2-06 (800336) | TE Connectivity | POWER ENTRY MODULE, COMPACT, 2A, FAST-ON/SOLDER LUG CONNECTIONS, FN280 SERIES |
| 34 | ||
| 0800379 (WMS 2 4 (15X4)R) | Phoenix Contact | SHRINK TUBING, POLYOLEFIN, 3:1, 15 MM, WHITE, THERMOMARK, WMS SERIES |
| 24 | ||
P018-003 | Tripp Lite | TRIPP LITE 3FT HEAVY DUTY POWER CORD ADAPTER 14AWG 15A 100V-250V C14 C15 3' RoHS : Compliant |
| 13 | ||
| 05380033001 (380033) | Wera Werk Hermann Werner GmbH & Co. KG | 840/4 Z HEX-PLUS SERIES,3.0 X 152MM BIT FOR HEX SOCKET SCREWS |
| 12 | ||
| 05028003001 (028003) | Wera Werk Hermann Werner GmbH & Co. KG | 367 TX 8 X 60MM TORX DRIVER, KRAFTFORM PLUS,300 SERIES |
| 6 | ||
| 69957308003 | Norton Winter | CARBIDE BURR, CYLINDRICAL W/OUT END CUT, SUB-SHAPE SA2, D1: 5/16 INCH |
| 2 | ||
| U038-003-CRA | Tripp Lite | USB 2.0, CABLE, A-USB TYPE C USB-C M/M RIGHT-ANGLE 3FT, HI-SPEED SERIES RoHS : Compliant |
| 2 | ||
| 130028-0037 (DND22A-M030) | Woodhead Molex | MICRO-CHANGE (M12) CORDSET;5 POLE;MALE/FEMALE;22 AWG;3.0M LENGTH;DND22A-M030 |
| 1 | ||
| 1SNA238003R0500 (023800305) | TE Connectivity | RC1010 MARKER HORZ 9-16,ENTRELEC |
| 1 | ||
| 130008-0033 (301000A01F200) | Woodhead Molex | MINI-CHANGE C-SIZE SINGLE-ENDED CORDSET, 10P, FEMALE, 16 AWG, PVC CABLE, 20.0' |
| 1 | ||
| 8003 | Exair LLC | IONIZING BAR ONLY (DOES NOT INCLUDE AIR KNIFE), 3" GEN 4 |
| 0 | ||
| 8003 | Vector Electronics & Technology Inc | PROTOBOARD, PERFORATED, GRID 0.1X0.1",BOARD 6.5"LX4.5"WX0.062"T, HOLE-DIA 0.042" RoHS : Unknown |
| 0 | ||
| 8003 | SCS | CLEANER; ESD; SURFACE & MAT CLEANER; REFILL 2.5 GALLON |
| 0 | ||
| 8003 | Russellstoll | FEMALE RECEPTACLE W/FLAP COVER FOR FS, FD, FSWS, FDWS, 15A, 250V, 2 POLE 3 WIRE |
| 0 | ||
 Microchip Technology Inc | 800-3 | Microchip Technology Inc | 3 Phase Bridge _ ME Epoxy Module, Projected EOL: 2049-02-05 RoHS : Not Compliant |
| 0 | |
| PIC8003 | Microchip Technology Inc | Power Integrated Circuit _ TO-66, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| DSC8003CI2 | Microchip Technology Inc | Unprog MEMS LVCMOS Oscillator, -40C-85C, 25ppm, VDFN, Projected EOL: 2041-08-14 RoHS : Compliant |
| 0 | ||
| DSC8003DL5 | Microchip Technology Inc | Unprog MEMS Oscillator, -40C-105C, 10ppm, VDFN, Projected EOL: 2045-11-09 RoHS : Compliant |
| 0 | ||
| DSC8003DI2 | Microchip Technology Inc | Unprog MEMS LVCMOS Oscillator, -40C-85C, 25ppm, VDFN, Projected EOL: 2041-08-08 RoHS : Compliant |
| 0 | ||
| DSC8003BI2 | Microchip Technology Inc | Unprog MEMS LVCMOS Oscillator, -40C-85C, 25ppm, VDFN, Projected EOL: 2046-08-01 RoHS : Compliant |
| 0 | ||
| ZL80032LDG1 | Microchip Technology Inc | Two-channel SyncE Timing Card IC with fast boot-up time, VQFN, Projected EOL: 2051-07-30 RoHS : Compliant |
| 0 | ||
| 920-50380-03 | Microchip Technology Inc | TP5000 - IPV6 SUPPORT LICENSE, Projected EOL: 2051-01-13 - Contact for Pricing RoHS : Not Compliant | 0 | |||
| 148-00397-000 | Microchip Technology Inc | IC QUAD INTEGRATED COMMUNICATION CNTRL, Projected EOL: 2051-04-03 - Contact for Pricing | 0 | |||
| 999-48638-003 | Microchip Technology Inc | TIMEPICTRA 3YR SUBSCRIPTION FOR EDGE GRAND MASTER (TP4X00, TP2X00), Projected EOL: - Contact for Pricing | 0 | |||
AT91M40800-33AU | Microchip Technology Inc | LQFP,GREEN,IND TEMP, LQFP, Projected EOL: 2040-11-05 RoHS : Compliant |
| 0 | ||
| AT91M40800-33AU-999 | Microchip Technology Inc | LQFP, GREEN, IND TEMP, T&R, LQFP, Projected EOL: 2041-02-14 RoHS : Compliant |
| 0 | ||
| ZL80032_CONFIGURABLE | Microchip Technology Inc | Two-channel SyncE Timing Card IC with fast boot-up time, VQFN, Projected EOL: 2049-07-30 - Contact for Pricing RoHS : Compliant | 0 | |||
| ZL80034_CONFIGURABLE | Microchip Technology Inc | 4-channel, 10-output SyncE timing card, VQFN, Projected EOL: 2049-07-30 - Contact for Pricing RoHS : Compliant | 0 | |||
| ZL80035_CONFIGURABLE | Microchip Technology Inc | 5-channel, 10-output SyncE timing card, VQFN, Projected EOL: 2049-07-30 - Contact for Pricing RoHS : Compliant | 0 | |||
 Bisco Industries | MKC01800320310S | SPRINGS | 551 | |||
| 41-00380-038 | MACHINE SCREWS | 488 | ||||
| 5610-280-031 | Seastrom Mfg | 400 | ||||
| 51080030001 | MISCELLANEOUS | 300 | ||||
| M38527/8-003P | Military Specifications | 230 | ||||
| 2JB8-003 | RIVETS | 187 | ||||
| ST6980-0.375-34 | Lyn-Tron Inc | 121 | ||||
| C0180-035-0690-S50 | ARaymond Network | 50 | ||||
| 80-035-3S4 | The Young Engineers Inc | 42 | ||||
| 800377-209 | MACHINE SCREWS | 35 | ||||
| C0480-035-1000-S | ARaymond Network | 34 | ||||
| 001-1808-003-000 | Richard Manno & Co | 29 | ||||
| M38527/08-003P | Micro Dimensional Products Inc | 17 | ||||
| 8003-16S-1P-FP-A3 | MISC. INDUSTRIAL CONNECTORS | 6 | ||||
| 80-034-12 | Circuit Systems Company Inc | 6 | ||||
 Rochester Electronics | PTN38003AEWY | NXP Semiconductors | PTN38003AEWY - USB3.2&DP1.4 Redriver RoHS : Compliant |
| 1,070,893 | |
| FH8068003067428S RET3 | Intel Corporation | Intel® Celeron® Processor J4025 (4M Cache, up to 2.90 GHz) FC-BGA15F, Tray |
| 1,815 | ||
| ISL88003IE29Z-T7A | Renesas Electronics Corporation | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +2.92V, PDSO3 RoHS : Compliant |
| 5,000 | ||
| ISL88003IH31Z-T | Renesas Electronics Corporation | Ultra Low Power 3 Ld Voltage Supervisors in SC-70 and SOT-23 Packages RoHS : Compliant |
| 3,000 | ||
| ISL88003IH31Z-T7A | Renesas Electronics Corporation | Ultra Low Power 3 Ld Voltage Supervisors in SC-70 and SOT-23 Packages RoHS : Compliant |
| 2,750 | ||
| ISL88003IH46Z-T | Renesas Electronics Corporation | Ultra Low Power 3 Ld Voltage Supervisors in SC-70 and SOT-23 Packages RoHS : Compliant |
| 15,000 | ||
| ISL88003IH46Z-T7A | Renesas Electronics Corporation | Ultra Low Power 3 Ld Voltage Supervisors in SC-70 and SOT-23 Packages RoHS : Compliant |
| 2,250 | ||
| SIT8003AC-12-33E-74.25000T | SiTime Corporation | LVCMOS Output Clock Oscillator, 74.25MHz Nom RoHS : Compliant |
| 24,000 | ||
| SIT8003AC-13-18S-19.20000Y | SiTime Corporation | LVCMOS Output Clock Oscillator, 19.2MHz Nom RoHS : Compliant |
| 2,000 | ||
| SIT8003AC-23-18S-60.00000V | SiTime Corporation | CRYSTAL OSC XO (Standard) LVCMOS, LVTTL 60MHz 1.71V ~ 1.89V ±50ppm 4-SMD T/R RoHS : Compliant |
| 15,000 | ||
| SIT8003AC-23-33E-15.86830Y | SiTime Corporation | LVCMOS Output Clock Oscillator, 15.8683MHz Nom RoHS : Compliant |
| 1,000 | ||
| SIT8003AC-23-33E-45.57831Y | SiTime Corporation | LVCMOS Output Clock Oscillator, 45.57831MHz Nom RoHS : Compliant |
| 5,000 | ||
| SIT8003AC-42-33E-7.37700Y | SiTime Corporation | CRYSTAL OSC XO (Standard) LVCMOS, LVTTL 7.377MHz 2.97V ~ 3.63V ±25ppm 4-SMD T/R RoHS : Compliant |
| 3,000 | ||
| SIT8003AI-32-33E-74.25000Y | SiTime Corporation | LVCMOS Output Clock Oscillator, 74.25MHz Nom RoHS : Compliant |
| 900 | ||
| SIT8003AJ-12-33E-65.00000Y | SiTime Corporation | LVCMOS Output Clock Oscillator RoHS : Compliant |
| 5,000 | ||
 Sager | ZW-05-13-S-S-800-388 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header, 0.100 Pitch RoHS : Compliant |
| 269 | |
| 8003 | ABB Group | Thomas & Betts |
| 0 | ||
| 8-1971800-3 | TE Connectivity | Headers & Wire Housings GI CONN 2.5 HDR 8P RED RoHS : Compliant |
| 0 | ||
| 800357 | TE Connectivity | NTC Thermistors 21525P10 PROBE | 0 | |||
| T4052128003-003 | TE Connectivity | Sensor Cables / Actuator Cables RPC-M8-3MS-1.5-M12-3FR-PUR RoHS : Compliant |
| 0 | ||
| T4151420008-003 | TE Connectivity | Sensor Cables / Actuator Cables RPC-M12-FR-8CON-PUR-1.5 RoHS : Compliant |
| 0 | ||
| 1300080033 | Molex | Sensor Cables / Actuator Cables MC 10P FP 20' 16/10 PVC RoHS : Compliant |
| 0 | ||
| 1300280031 | Molex | Sensor Cables / Actuator Cables MIC 5P M/MFE 1.5M ST/ST DROP |
| 0 | ||
| 0438003.WRGT | Littelfuse Inc | FUSE 32V FA 0603 3A GT RoHS : Compliant | 0 | |||
| 0733280030 | Molex | RF Connectors / Coaxial Connectors SSMB RA PCB-PLG RoHS : Compliant |
| 0 | ||
| 0800310 | Phoenix Contact | Terminal Block Tools & Accessories UBE RoHS : Compliant |
| 0 | ||
0800347 | Phoenix Contact | Terminal Block Tools & Accessories EMLS (15X9)R SR RoHS : Compliant |
| 0 | ||
| 0800392 | Phoenix Contact | Terminal Block Tools & Accessories WMS 2,4 (60X4)RXL RoHS : Compliant |
| 0 | ||
| 0804468:0031 | Phoenix Contact | Terminal Block Tools & Accessories SK 7,5/5: FORTL.ZAHLEN 31-40 |
| 0 | ||
| 1200800308 | Molex | Sensor Cables / Actuator Cables MIC 4P MFE ULOCK 4M 90/ST 22/4 | 0 | |||
 TME | 13668003X | Aptiv PLC | Connector: wire-wire |
| 15,400 | |
| 39527-8003 | Molex | Connector: pluggable terminal block; 10A,18A; 300V; PIN: 3; tinned |
| 1,067 | ||
| 12B-04PFFP-SF8003 | Amphenol Corporation | 12B-04PFFP-SF8003 |
| 400 | ||
| 39880-0304 | Molex | Connector: PCB terminal block; 13.5A; 300V; on PCBs; tinned |
| 400 | ||
| 248-2988-003 | ITT Interconnect Solutions | Connector: wire-wire/PCB |
| 370 | ||
| 485025103980032 | Honeywell Sensing and Control | 485025103980032 |
| 64 | ||
| 1301800337 | Molex | Grommet; green; IP67 RoHS : Compliant |
| 57 | ||
| 380-03001 | HellermannTyton | Set of heat shrink sleeves; 3: 1; -55÷135°C; 240pcs; 20kV/mm RoHS : Compliant |
| 13 | ||
| 1300980032 | Molex | Cable gland; NPT3/8"; polyamide; grey |
| 12 | ||
| 1301380032 | Molex | Connector: AC supply; PA; straight; yellow; Colour: yellow |
| 2 | ||
| 0061800350100 | ALPS MAYKESTAG GmbH | Drill bit; for metal; Ø: 3.5mm; L: 70mm; high speed steel; 2pcs. |
| 0 | ||
| 09 4807 80 03 | Binder UK Ltd | Connector: circular; 440; 150V; 7A; PIN: 3; socket; male; soldering |
| 0 | ||
| 12-05PFIS-SH8003 | Amphenol LTW Technology | Connector: M12; socket; PIN: 5; male; M12 ALTW; cables; metal; I code |
| 0 | ||
| 1780030000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; male; OMNIMATE; 19A; 400V RoHS : Compliant |
| 0 | ||
| 7000-74101-8003000 | Murrelektronik GmbH | Patch cord; Cat 5e; cables,RJ45 plug; stranded; Cu; 30m; PVC; green RoHS : Compliant |
| 0 | ||
 Ameya Holding Limited | UPD780034AGC-119-8BS-A | Renesas Electronics Corporation | IC MCU | 24,432 | ||
| R8003KND3TL1 | ROHM Semiconductor | 高速开关，N沟道800V 3A，TO-252 (DPAK)，功率MOSFET RoHS : Compliant |
| 5,500 | ||
| R8003KNXC7G | ROHM Semiconductor | 800V 3A, TO-220FM, 高速开关功率MOSFET RoHS : Compliant |
| 1,000 | ||
| TPA8003-SOAR | 3peak Incorporated | 350 | ||||
 ComSIT USA | 80018003923 | SCOTCH MATE 3M | AVAILABLE EU | 134 | ||
| 648003 | MAQGRF | AVAILABLE EU | 1,769 | |||
| 0980039A | EMDA | AVAILABLE EU | 230 | |||
ComSIT USA | 458003MPT08V12VP12 | Lumberg Connect GmbH | Terminals - Other Female, Receptacle (Socket) Crimp RoHS : Compliant | 15,750 | ||
| STTH8003CY | STMicroelectronics | HIGH FREQUENCY SECONDARY RECTIFIER Rectifier Diode, 1 Phase, 2 Element, 40A, 300V V(RRM), Silicon RoHS : Compliant | 11,520 | |||
| 0438003WR | Littelfuse Inc | SURFACE MOUNT CERAMIC FUSE Electric Fuse, Fast Blow, 3A, 12VAC, 32VDC, 50A (IR), Surface Mount, 0603 RoHS : Compliant | 6,000 | |||
| 2T05X5WA8003091 | Eaton Bussmann | Electronic Component RoHS : Compliant | 5,720 | |||
| 537800370 | Molex | RECT CONN Header Male Pin Surface Mount 3 POS 1.25mm Solder Gold T/R RoHS : Compliant | 5,439 | |||
| UPD780032AGC5018BSA | NEC Electronics Group | Electronic Component RoHS : Compliant | 4,294 | |||
| SPEC80030409 | any | Electronic Component RoHS : Compliant | 3,000 | |||
| S1W03034080030000004S00002 | Seoul Semiconductor | LED RoHS : Not Compliant | 2,075 | |||
| 80030A060G2T | Suyin Group | Electronic Component RoHS : Not Compliant | 625 | |||
| MLX108003B | Melexis Microelectronic Integrated Systems | Electronic Component RoHS : Not Compliant | 160 | |||
| 442480030 | Molex | Jacks Jack 8p8c (RJ45, Ethernet) POS 90� Angle (Right) Shielded Tray RoHS : Compliant | 160 | |||
| CT80618003201AA | Intel Corporation | RISC Microprocessor, 32-Bit, 1.3MHz, CMOS, PBGA676 RoHS : Compliant | 125 | |||
| UA20PMFPSC8003 | Amphenol Corporation | Cable Assembly RoHS : Not Compliant | 67 | |||
| DSSK48003B | IXYS Corporation | POWER SCHOTTKY RECTIFIER WITH COMMON CATHODE Rectifier Diode, Schottky, 1 Phase, 2 Element, 25A, 30V V(RRM), Silicon, TO-220AB RoHS : Not Compliant | 50 | |||
| JM3851008003BDA | National Semiconductor Corporation | QUADRUPLE 2-INPUT POSITIVE-AND GATE AND Gate, S Series, 4-Func, 2-Input, TTL, CDFP14 RoHS : Not Compliant | 19 | |||
 Interstate Connecting Components | 8003B4 | MISC MIL-AERO | UNCODED | 1 | ||
| 68003122-105 REV - | Glenair Inc | 0 | ||||
| 8-1971800-3 | TE Connectivity | NEW GI CONN2.5 HDR ASMBLY 8P R RoHS : Compliant |
| 0 | ||
| T4052128003-003 | TE Connectivity | RPC-M8-3MS-1.5-M12-3FR-PUR RoHS : Compliant |
| 0 | ||
| T4151420008-003 | TE Connectivity | RPC-M12-FR-8CON-PUR-1.5 RoHS : Compliant |
| 0 | ||
| 155728-0030 | ITT Interconnect Solutions | MKJ1B26F17-85PD | 0 | |||
| 04-1298-0031 | TE Connectivity | RT8420-0R25-112-1140 | 0 | |||
| 39050560818003 | Amphenol PCD | TERRAPIN | 0 | |||
| HD18-003 | TE Connectivity | BACK SHELL RoHS : Compliant | 0 | |||
| 928-003-28-09SC1A | Glenair Inc | 0 | ||||
| 928-003-32-68SC1A | Glenair Inc | 0 | ||||
| 880-030RA-K13M19N-MS-.125 | Glenair Inc | 880-030RA-K13M19N-MS-.125 | 0 | |||
| T2080032101-007 | TE Connectivity | HQ-003-M RoHS : Compliant | 0 | |||
| T4052228003-002 | TE Connectivity | RPC-M8-3MR-1.0-M12-3FR-PUR RoHS : Compliant |
| 0 | ||
| T4161210008-003 | TE Connectivity | RPC-M12-MR-8CON-PVC-1.5SH RoHS : Compliant |
| 0 | ||
 NexGen Digital | AT91M40800-33AU | Atmel Corporation | RoHS : Compliant | 320 | ||
 PEI Genesis | 025-9528-003 | ITT Interconnect Solutions |
| 308 | ||
| 8003 | Pico Tools |
| 0 | |||
| ZT02-18-003-3/4 | The ZiPPERTUBiNG Co |
| 0 | |||
| 21-033048-003 | Amphenol Corporation |
| 0 | |||
| 32028003361 | Amphenol Aerospace |
| 0 | |||
| 558-00307 | HellermannTyton |
| 0 | |||
| 581-01-48-003 | Cinch Connectivity Solutions |
| 0 | |||
| 558-00351 | HellermannTyton |
| 0 | |||
| 558-00337 | HellermannTyton |
| 0 | |||
| CIRG06WK2-14S-5P-F80-03 | ITT Interconnect Solutions |
| 0 | |||
| CS-VHDCI68H68-003 | Amphenol Corporation | RoHS : Compliant |
| 0 | ||
| 217-1198-003 | ITT Interconnect Solutions |
| 0 | |||
| 030-3198-003 | ITT Interconnect Solutions |
| 0 | |||
| 32028003361ABJ | Amphenol Aerospace |
| 0 | |||
| C016-10D008-003-1 | Amphenol Tuchel |
| 0 | |||
 Powell Electronics | 5161800-3 | TE Connectivity | Connectors RoHS : Compliant |
| 19,083 | |
| 282378-003 | TE Connectivity | Wire & Cable RoHS : Compliant |
| 3,035 | ||
| 5-1814800-3 | TE Connectivity | Wire & Cable RoHS : Compliant |
| 2,274 | ||
| 4-1971800-3 | TE Connectivity | TE COMPONENT (REF 4-1971800-3) RoHS : Compliant |
| 1,716 | ||
| ZW-05-13-S-S-800-388 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 178 | ||
| ZW-12-13-G-D-800-300 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 158 | ||
| T4052228003-002 | TE Connectivity | Cable Assemblies RoHS : Compliant |
| 98 | ||
| 800-34-1 | TE Connectivity | DEUTSCH CONNECTOR 800-34-1 |
| 13 | ||
| CHA-0018-003CS2566 | TE Connectivity | Connectors |
| 12 | ||
| 800353-SF | TE Connectivity | Connectors RoHS : Compliant |
| 7 | ||
| 800308-SF | TE Connectivity | TE COMPONENT 800308-SF RoHS : Compliant |
| 6 | ||
| 800314-SF | TE Connectivity | TE COMPONENT 800314-SF RoHS : Compliant |
| 5 | ||
| 280-031S2S15MEG | Glenair Inc | HIPER-D - RECTANGULAR CONN RoHS : Compliant |
| 1 | ||
| 47978003 | Hartmann Electronic | AERO RELAY/CONTACTOR 47978003 |
| 1 | ||
| HSEC8-180-03-L-DV-A-WT-K | Samtec Inc | CARD EDGE SOCKET 0.80MM 80POS 2ROW VERT RoHS : Compliant |
| 1 | ||
 PUI | 8003-24T6U | 9,359 | ||||
| 8003-32T6U | 4,882 | |||||
| 8003-28T6U | 2,943 | |||||
| 8003-24T3U | 2,064 | |||||
| 8003-18T3U | Oupiin | 1,872 | ||||
| 8003-22T4U | 1,378 | |||||
| 8003-20T3U | Oupiin | 935 | ||||
| 8003-40T6U | Oupiin | RoHS : Compliant | 564 | |||
| 12.88003 | 400 | |||||
| 8003-06T3U | Oupiin | RoHS : Compliant | 62 | |||
| 8003-14T3U-A002 | 48 | |||||
| 8003-14T3U | 29 | |||||
| 8003-08T3U | Oupiin | RoHS : Compliant | 14 | |||
| 8003-28T3U | 6 | |||||
 Richardson RFPD | MA180035 | Microchip Technology Inc | PIC18F66K80 Microcontroller Head Board RoHS : Compliant | 0 | ||
| LC0800-380-ASW | LICAP Technologies Inc | Lithium Ion Capacitor Cell RoHS : Compliant | 0 | |||
| MA180034 | Microchip Technology Inc | PIC18F97J94 Microcontroller Socket Board RoHS : Compliant | 0 | |||
| 80031-000 | TE Connectivity | Cable Accessories Seal PolyvinylChloride RoHS : Compliant |
| 0 | ||
| LTM8003IY | Analog Devices Inc | Module DC-DC 1-OUT 0.97V to 18V 3.5A 48-Pin BGA T RoHS : Not Compliant |
| 0 | ||
ATS-58003-C1-R0 | Advanced Thermal Solutions Inc | Heat Sink Passive Extruded Black Anodized RoHS : Compliant |
| 0 | ||
| CVCO55CW-2800-3800 | Crystek Corporation | OSCILLATOR VCO RoHS : Compliant | 0 | |||
| BMR4580031/020 | Ericsson Power Modules | DCTODC CONVERTR MOD RoHS : Compliant | 0 | |||
| LTM8003IY-3.3#PBF | Analog Devices Inc | Module DC-DC 1-OUT 3.3V 3.5A Automotive 48-Pin BGA RoHS : Compliant |
| 0 | ||
| LTM8003IY#PBF | Analog Devices Inc | Module DC-DC 1-OUT 0.97V to 18V 3.5A Automotive 48 RoHS : Compliant |
| 0 | ||
| 1498003-10M000 | CTS Corporation | Oscillator VC-OCXO 10MHz ±0.2ppm (Tol) ±10ppb (Sta RoHS : Compliant | 0 | |||
| LTM8003HY#PBF | Analog Devices Inc | Module DC-DC 1-OUT 0.97V to 18V 3.5A 48-Pin BGA T RoHS : Compliant |
| 0 | ||
| R282888003 | Radiall | INTERCONNECT TOOL |
| 0 | ||
| CG2H80030D-GP4 | MACOM | Trans RF MOSFET 120V 3A Bare Die Gel RoHS : Compliant |
| 0 | ||
| WP28003075UH | WAVEPIA Co., Ltd | 75W, 28V Unmatched GaN HEMT Package type 580BH Thr RoHS : Not Compliant | 0 | |||
 Rutronik | 0468003.NRHF | Littelfuse Inc | 3A 32V slow 1206 SMD RoHS : Compliant |
| 5,000 | |
| 0438003.WRGT | Littelfuse Inc | 3A 63VDC fast 0603 SMD HF GT RoHS : Compliant |
| 3,000 | ||
| 4580 03 OP T2,0 V12VP12 | Lumberg Connect GmbH | High-current contact socket without pin RoHS : Compliant |
| 1,400 | ||
| USB4080-03-A | Global Connector Technology | USB Type-C Rec 24P Top-Mount SMT RoHS : Compliant |
| 900 | ||
| USB4180-03-0120-C | Global Connector Technology | USB Type-C Plug 06P Vert SMT H=11.16mm RoHS : Compliant |
| 800 | ||
| R8003KND3TL1 | ROHM Semiconductor | N-CH 800V 3A 1500mOhm TO252 RoHS : Compliant |
| 90 | ||
| MS88SFB8-003 SAMPLE | MINEW | nRF52840 core+21540 PA RoHS : Compliant |
| 10 | ||
 Chip 1 Exchange | 502380-0300 | Molex | INSTOCK RoHS : Compliant | 1,133,811 | ||
| 91778-0030 | Molex | INSTOCK RoHS : Compliant | 244,374 | |||
| 5161800-3 | TE Connectivity | INSTOCK RoHS : Compliant | 37,586 | |||
DSSK48-003B | IXYS Corporation | INSTOCK RoHS : Compliant | 19,255 | |||
| 39880-0303 | Molex | INSTOCK RoHS : Compliant | 15,145 | |||
| 53780-0370 | Molex | INSTOCK RoHS : Compliant | 13,510 | |||
| 39980-0310 | Molex | INSTOCK RoHS : Compliant | 8,139 | |||
| 5-1814800-3 | TE Connectivity | INSTOCK RoHS : Compliant | 5,903 | |||
| 744778003 | INSTOCK | 5,655 | ||||
| 09 0308 80 03 | Binder UK Ltd | INSTOCK | 3,121 | |||
| W180-03GT | INSTOCK | 3,093 | ||||
| 0528-003-3805 | TE Connectivity | INSTOCK | 2,925 | |||
| 1301380034- | Molex | INSTOCK | 2,672 | |||
| 800338-SF | TE Connectivity | INSTOCK RoHS : Compliant | 2,431 | |||
| 517.028.003.012.000 | INSTOCK | 112 | ||||
 Avnet Abacus | 890-18-003-10-001101 | PRECI-DIP SSA | Conn Unshrouded Header HDR 3 POS 254mm Solder ST ThruHole Box (Alt: 890-18-003-10-001101) RoHS : Compliant | 2,500 | ||
| 194180038 | Molex | (Alt: 194180038) RoHS : Compliant | 1,728 | |||
| UA-20PMFP-SC8003 | Amphenol Corporation | (Alt: UA-20PMFP-SC8003) RoHS : Compliant | 1,000 | |||
| C01610H0080031 | Amphenol Corporation | 8PE Male cable connector with strain relief and clamping ring For use with crimp contacts sold s (Alt: C01610H0080031) RoHS : Compliant | 100 | |||
| C01610D0080031 | Amphenol Corporation | Circular Connector ecomate C16 Series Cable Mount Plug 9 Contacts (Alt: C01610D0080031) RoHS : Compliant | 100 | |||
| 60800330 | nVent Schroff | PEN60800330 (Alt: 60800330) RoHS : Compliant | 30 | |||
| 800357 | TE Connectivity | (Alt: 11031563-00) RoHS : Compliant | 0 | |||
| 0800347 | Phoenix Contact | EMLS 15X9R SR EMLS15X9RSR (Alt: 0800347) RoHS : Compliant | 0 | |||
| 8-1971800-3 | TE Connectivity | (Alt: 8-1971800-3) RoHS : Compliant | 0 | |||
| 8-1971800-3 | TE Connectivity | (Alt: 8-1971800-3) RoHS : Compliant | 0 | |||
| 637E18003I3T | CTS Corporation | - Tape and Reel (Alt: 637E18003I3T) RoHS : Compliant | 0 | |||
| 653E18003I3T | CTS Corporation | - Tape and Reel (Alt: 653E18003I3T) RoHS : Compliant | 0 | |||
| 653L18003C2T | CTS Corporation | - Tape and Reel (Alt: 653L18003C2T) RoHS : Compliant | 0 | |||
| 800-80-035-10-002101 | PRECI-DIP SSA | Unshrouded Header HDR 254mm Solder ST ThruHole (Alt: 800-80-035-10-002101) RoHS : Compliant | 0 | |||
| 892-80-030-10-002101 | PRECI-DIP SSA | PRD8928003010002101 (Alt: 892-80-030-10-002101) RoHS : Compliant | 0 | |||
Avnet Asia | PM2180.034NLT | Pulse Electronics Corporation | Power Transformer 3CT:4CT Dual Prim. Dual Sec. SMD T/R (Alt: PM2180.034NLT) RoHS : Compliant |
| 10,500 | |
| G88003201TEU | Amphenol Corporation | (Alt: G88003201TEU) RoHS : Compliant | 0 | |||
| G800304005KD1HR | Amphenol Corporation | (Alt: G800304005KD1HR) RoHS : Compliant | 0 | |||
| G800304005KYEU | Amphenol Corporation | (Alt: G800304005KYEU) RoHS : Compliant | 0 | |||
| Q22FA1280030600 | Epson Electronics America Inc | FA-128 48.000000 MHZ 7.0 +10.0-10.0 (Alt: Q22FA1280030600) RoHS : Compliant | 0 | |||
| Q22FA1280039300 | Epson Electronics America Inc | (Alt: Q22FA1280039300) RoHS : Compliant | 0 | |||
| G88003103THR | Amphenol Corporation | DL110,CONN-WTB 1.25MM-PITCH VERTICAL 3-P (Alt: G88003103THR) RoHS : Compliant | 0 | |||
| BFC280908003 | Vishay Intertechnologies | (Alt: BFC280908003) RoHS : Compliant | 0 | |||
| 10118615-518003LF | Amphenol Corporation | (Alt: 10118615-518003LF) RoHS : Compliant | 0 | |||
| G880031112C1HR-NC | Amphenol Corporation | (Alt: G880031112C1HR-NC) RoHS : Compliant | 0 | |||
| 10129368-003TRLF | Amphenol Corporation | Conn SAS RCP 15Power/14Signal POS 1.27mm/0.8mm Solder ST SMD T/R (Alt: 10129368-003TRLF) RoHS : Compliant | 0 | |||
| Q22FA1280039800 | Epson Electronics America Inc | FA-128 24.000000 MHZ 8.0 +10.0-10.0 (Alt: Q22FA1280039800) RoHS : Compliant | 0 | |||
| G880031112C1HR | Amphenol Corporation | (Alt: G880031112C1HR) RoHS : Compliant | 0 | |||
| ECS-CTE-8.00-33-TR | ECS International Inc | (Alt: ECS-CTE-8.00-33-TR) RoHS : Compliant | 0 | |||
| ECS-CTP-8.00-30-TR | ECS International Inc | (Alt: ECS-CTP-8.00-30-TR) RoHS : Compliant | 0 | |||
 Avnet Silica | S1W0-5630408003-0000003S-00003 | Seoul Semiconductor | MID POWER 5630 4000K CRI 80 3STEP (Alt: S1W0-5630408003-0000003S-00003) RoHS : Compliant | 18,000 | ||
| S1W0-3030308003-0000003S-0P004 | Seoul Semiconductor | LED Chip Warm White 3000K 400mA 2Pin SMD TR (Alt: S1W0-3030308003-0000003S-0P004) RoHS : Compliant | 13,500 | |||
| S1W0-5630658003-0000003S-00003 | Seoul Semiconductor | MID POWER 5630 6500K CRI 80 3STEP (Alt: S1W0-5630658003-0000003S-00003) RoHS : Compliant | 4,500 | |||
| S1W0-5630508003-0000003S-00004 | Seoul Semiconductor | MID POWER 5630 5000K CRI 80 3STEP (Alt: S1W0-5630508003-0000003S-00004) RoHS : Compliant | 4,500 | |||
| S1W0-2222408003-00000000-00001 | Seoul Semiconductor | (Alt: S1W0-2222408003-00000000-00001) RoHS : Compliant | 2,000 | |||
| R8003KND3 | ROHM Semiconductor | (Alt: R8003KND3) RoHS : Compliant | 0 | |||
| EV8003A-Q-00A | Monolithic Power Systems | (Alt: EV8003A-Q-00A) RoHS : Compliant | 0 | |||
| S1W0-2222508003-00000000-00001 | Seoul Semiconductor | (Alt: S1W0-2222508003-00000000-00001) RoHS : Compliant | 0 | |||
| S1W0-2835278003-0000003S-00003 | Seoul Semiconductor | MID POWER (Alt: S1W0-2835278003-0000003S-00003) RoHS : Compliant | 0 | |||
| S1W0-2835308003-0000003S-0PB01 | Seoul Semiconductor | LED Chip Warm White 3000K 65mA 2Pin SMD TR (Alt: S1W0-2835308003-0000003S-0PB01) RoHS : Compliant | 0 | |||
| S1W0-2835408003-0000004S-0P001 | Seoul Semiconductor | LED Chip Neutral White 4000K 300mA 2Pin SMD TR (Alt: S1W0-2835408003-0000004S-0P001) RoHS : Compliant | 0 | |||
| S1W0-2835408003-0000004S-0PB03 | Seoul Semiconductor | LED Chip Neutral White 4000K 300mA 2Pin SMD TR (Alt: S1W0-2835408003-0000004S-0PB03) RoHS : Compliant | 0 | |||
| S1W0-2835578003-0000003S-0P002 | Seoul Semiconductor | LED Chip Cool White 5700K 200mA 2Pin SMD TR (Alt: S1W0-2835578003-0000003S-0P002) RoHS : Compliant | 0 | |||
| S1W0-2835658003-0000004S-0PB02 | Seoul Semiconductor | LED Mid Power 3528 3V CCT 6500K CRI80 4 STEPReel 16K (Alt: S1W0-2835658003-0000004S-0PB02) RoHS : Compliant | 0 | |||
| S1W0-3030508003-0000003S-00001 | Seoul Semiconductor | LED Chip Cool White 5000K 200mA 2Pin SMD TR (Alt: S1W0-3030508003-0000003S-00001) RoHS : Compliant | 0 | |||
 Component Electronics, Inc | 8003 | Pentair Equipment Protection - Hoffman | IN STOCK SHIP TODAY |
| 3,000 | |
| 32-800-36 | MMG Canada Ltd | IN STOCK SHIP TODAY | 475 | |||
| SE-208003-568 | Falco Electronics | IN STOCK SHIP TODAY | 400 | |||
| QTE-080-03-F-D-A | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 125 | ||
| 318003 | Littelfuse Inc | IN STOCK SHIP TODAY |
| 80 | ||
| 0318003.H | Littelfuse Inc | IN STOCK SHIP TODAY |
| 80 | ||
| MF60-8003-BB | RCD Components Inc | IN STOCK SHIP TODAY |
| 70 | ||
| IC180-0324 | Yamaichi Electronics Co Ltd | IN STOCK SHIP TODAY | 58 | |||
| 8800370 | Neutrik USA Inc | IN STOCK SHIP TODAY | 50 | |||
| HD18-003 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 25 | ||
| AT91M40800-33AI | Atmel Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 3 | ||
| LTM8003IY-3.3#PBF | Analog Devices Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 2 | ||
| 44538-0030 | STI | IN STOCK SHIP TODAY |
| 2 | ||
| 8003901001 | Weidmüller Interface GmbH & Co. KG | IN STOCK SHIP TODAY RoHS : Compliant |
| 1 | ||
| 4138003/10 | CommScope Inc | IN STOCK SHIP TODAY RoHS : Compliant | 1 | |||
 DB Roberts | 0580030000VR | Essentra Components | 0 | |||
| 07287-08003 | Avdel | 07287 SB TL - SEAL PRT PULL | 0 | |||
| 782PP-800338 | Avdel | KUNSTSTOFFKOFFER K2003 INCL. E | 0 | |||
| 61PR800300 | Essentra Components | PUSH RIVET, .250 HOLE, .109-.1 | 0 | |||
| D1-444-080-030SE | Southco | These versatile economical quarter turn fasteners for high-volume light-duty applications provide a low installed cost attractive aesthetics and more generous tolerance ranges than other quarter turn fasteners. Built-in detents indicate full engagement | 0 | |||
| 61PR800300B | Essentra Components | PUSH RIVET, .250 HOLE, .109-.1 | 0 | |||
| 07008-00375 | Avdel | BANJO FLOW RESTRICTOR | 0 | |||
| D1-125-080-030SE | Southco | These versatile economical quarter turn fasteners for high-volume light-duty applications provide a low installed cost attractive aesthetics and more generous tolerance ranges than other quarter turn fasteners. Built-in detents indicate full engagement | 0 | |||
| 782PP-800358 | Avdel | KUNSTSTOFFKOFFER M.EINLAGE F. | 0 | |||
| 388-80030-00 | Acumnet / Camcar | 0 | ||||
| 3BH-H8003-00 | Acumnet / Camcar | 6-32 X 5/16 SLTD HWH SW | 0 | |||
| 8003-256-A-24 | RAF Electronic Hardware | Round Internal Thread Handles 1/8 OD x 1.00 Lg x 1/2 Ht | 0 | |||
| D1-004-080-030 | Southco | These versatile economical quarter turn fasteners for high-volume light-duty applications provide a low installed cost attractive aesthetics and more generous tolerance ranges than other quarter turn fasteners. Built-in detents indicate full engagement | 0 | |||
| 34009628003 | Essentra Components | 0 | ||||
| 782PP-800357 | Avdel | KUNSTSTOFF-KOFFER INCL. SCHAUM | 0 | |||
 EBV Elektronik | ASSR-1218-003E | Broadcom Limited | Relay SSR 20mA 16V DC 200mA 60V ACDC 4Pin SOIC Tube (Alt: ASSR-1218-003E) RoHS : Compliant | 18,400 | ||
| HCPL-7800-300E | Broadcom Limited | Optocoupler Optically Isolated Amplifiers 1 Channel Surface Mount DIP 8 Pins 375 kV 100 kHz (Alt: HCPL-7800-300E) RoHS : Compliant | 1,200 | |||
| DCP-END030/1-PC800-38 | Luminus Devices | ACDC LED Driver 304 W 38 V 800 mA Constant Current 220 VAC to 240 VAC (Alt: DCP-END030/1-PC800-38) RoHS : Compliant | 1,100 | |||
| ASSR-4118-003E | Broadcom Limited | (Alt: ASSR-4118-003E) RoHS : Compliant | 0 | |||
| AT91M40800-33AU | Microchip Technology Inc | MCU 32bit 91M ARM7TDMI RISC ROMLess 25V33V 100Pin TQFP (Alt: AT91M40800-33AU) RoHS : Compliant | 0 | |||
| CY7C68003-24LQXI | Infineon Technologies AG | USB Transceiver 1TR 24Pin QFN EP (Alt: SP005819614) RoHS : Compliant | 0 | |||
| A8003SMHN1/9A28AU | NXP Semiconductors | Identification Authentication Security ICs (Alt: A8003SMHN1/9A28AU) RoHS : Not Compliant | 0 | |||
| A8003SMHN1/9E34AF | NXP Semiconductors | Identification Authentication Security ICs (Alt: A8003SMHN1/9E34AF) RoHS : Compliant | 0 | |||
| AT91M40800-33AU-999 | Microchip Technology Inc | MCU 32bit 91M ARM7TDMI RISC ROMLess 25V33V 100Pin LQFP (Alt: AT91M40800-33AU-999) RoHS : Compliant | 0 | |||
| FH8068003067408S R3S0 | Intel Corporation | (Alt: 961639) RoHS : Compliant | 0 | |||
| CL8068404148003S RFDS | Intel Corporation | Intel Core i78665UE Processor 8M Cache up to 440 GHz FCBGA14F Tray (Alt: 999DR3) RoHS : Compliant | 0 | |||
| FH8068003067401S RGN6 | Intel Corporation | Intel Celeron Processor N4020C 4M Cache up to 280 GHz FCBGA15F Tray (Alt: 999L7W) RoHS : Compliant | 0 | |||
| FH8068003067406S R3RZ | Intel Corporation | Intel Pentium Silver N5000 Processor 4M Cache up to 270 GHz FCBGA15F Tray (Alt: 961638) RoHS : Compliant | 0 | |||
| DIT-END030/1-PC800-38 | Luminus Devices | ACDC LED Driver 304 W 38 VDC 800 mA Constant Current 220 VAC to 240 VAC DITEND Series (Alt: DIT-END030/1-PC800-38) RoHS : Compliant | 0 | |||
| FH8068003067426S RET0 | Intel Corporation | Intel Celeron Processor N4020 4M Cache up to 280 GHz FCBGA15F Tray (Alt: 984730) RoHS : Compliant | 0 | |||
 ECCO | C10-737238-003 | Amphenol Industrial Operations |
| 15 | ||
 FDH Electronics | M38527/08-003P | BOYD Laconia | Other Products | 760 | ||
| 8800-37 REV - | Cable Assembly | Cable Assembly | 206 | |||
| 8003-16S-1P-FP-A3 | Sealtron Inc | Hermetic Conn | 22 | |||
| Y69901430800354PSF | TE Connectivity | Shell | 19 | |||
| 8003-14S-6P-FP-A3 | Sealtron Inc | Hermetic Conn | 12 | |||
| 5M2778-003 | TE Connectivity | Harness Mgmt | 3 | |||
| 8003-18-4P-FP-A3 | Sealtron Inc | Hermetic Conn | 2 | |||
| 8003-10SL-3P-SP-A3 | Sealtron Inc | Circular Conn | 1 | |||
| 629-198-003 REV G | BTC-Customer Drawing "DWG" | Circular Conn | 1 | |||
| 5678003007S | Federal-Mogul Corporation | Harness Mgmt | 0 | |||
| CHA-0018-003 | TE Connectivity | Rectangular Con |
| 0 | ||
| 50000058-003 | Honeywell Sensing and Control | Switches | 0 | |||
| 5678003807S | Federal-Mogul Corporation | Harness Mgmt | 0 | |||
| CHA-0048-003CS2566 | TE Connectivity | MTC Products |
| 0 | ||
| 2455RM 01580030 | Honeywell Sensing and Control | Thermistor |
| 0 | ||
 Flip Electronics | W280036A01H-IR485HU | onsemi | Stock, Ship Today | 960,000 | ||
| HCPL-7800-30GE | Broadcom Limited | Stock, Ship Today |
| 1,450 | ||
 Maritex | HL-PETA-3010H233W(2800-3200K) | Hongli Zhihui Group Co LTD | LED HL-PETA-3010H233W(2800-3200K); SMD; 1204; warm white; 2800K-3200K; 600mcd/20mA; 2.8-3.4V; water clear; 120 degrees |
| 3,760 | |
| HL-A-4014H489W-S1-HR3-DM-L 2800-3100K | Hongli Zhihui Group Co LTD | LED mid-power; SMD; 4014 PLCC2; warm white; 2800-3100K; 21-23lm/60mA; 2.8-3.4V; diffused; 120 degrees; 4.0x1.4x0.7mm |
| 2,378 | ||
| SJK-6C-8.00-30-30-50-F-C-50-H | SJK | Quartz crystal; 8.000MHz; HC49SMD; 30ppm; 30pF |
| 1,000 | ||
| SJK-6B-8.00-32-30-50-F-B-30-H | SJK | Miniature Quartz crystal; 8.000MHz; HC49S; 30ppm; 32pF |
| 471 | ||
| TPA8003-SOAR | 3peak Incorporated | Operational Amplifiers; TPA8003-SOAR; 3PEAK |
| 253 | ||
| 9D.01.5.080.0304 | FINDER SpA | Din rail terminal block; distribution block; single-pole; 3x16mm2/ 4x6mm2; 1000 VAC/1500 VDC; 80A |
| 5 | ||
| 968-003 | Spec Sensors | Analog hydrogen sulfide sensor; range: 50ppm; supply: 3V; power: 30uW; output: voltage |
| 1 | ||
| VB8003-16 | VIA Technologies Inc | Mini-ITX board 1.6GHz Nano ECPU; 2 x HDMI; DVI;CRT; USB;COM;CF; IDE; SATA; GigaLAN |
| 1 | ||
 Master Electronics | 8003 | Thomas & Betts | Conn Power RCP 2Power/1Ground POS ST Panel Mount 3 Terminal 1 Port RoHS : Compliant |
| 0 | |
| MSF4800A30180030180030X3 | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| 300HP2B08.003SA0800.305 | TE Connectivity | MOQ Reduction RoHS : Compliant |
| 0 | ||
| 8-1971800-3 | TE Connectivity | Conn Shrouded Header (4 Sides) HDR 8 POS 2.5mm Solder ST Top Entry Thru-Hole Bag/Box MOQ Reduction RoHS : Compliant |
| 0 | ||
| MSF4800300640R2 | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| M17-8ES1N8A8003 | Phoenix Contact | Cable connector - straight - SPEEDCON locking - M17 - number of positions: 5+3+PE - type of contact: Socket - Crimp connection - shielded: yes - cable diameter range: 5 mm ... 9.2 mm RoHS : Compliant |
| 0 | ||
| M23-06P1N8A8003S | Phoenix Contact | Cable connector - M23 PRO - straight - shielded: yes - ONECLICK fast locking system - M23 - No. of pos.: 6 - type of contact: Pin - Crimp connection - cable diameter range: 6 mm ... 10 mm RoHS : Compliant |
| 0 | ||
| M23-17S1N8A8003 | Phoenix Contact | Cable connector - M23 PRO - straight - shielded: yes - Screw locking - M23 - No. of pos.: 17 - type of contact: Socket - Crimp connection - cable diameter range: 6 mm ... 10 mm RoHS : Compliant |
| 0 | ||
| M23-19P1N128003S | Phoenix Contact | Phoenix Contact Kabelconnectoren M23-19P1N128003S - 1342730 RoHS : Compliant |
| 0 | ||
| ZW-05-13-S-S-800-388 | Samtec Inc | FLEXIBLE BOARD STACKING H RoHS : Compliant |
| 0 | ||
| T4052128003-003 | TE Connectivity | RPC-M8-3MS-1.5-M12-3FR-PUR MOQ Reduction RoHS : Compliant |
| 0 | ||
| T4151420008-003 | TE Connectivity | RPC-M12-FR-8CON-PUR-1.5 RoHS : Compliant |
| 0 | ||
| MSF4800S4018003012403009 | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| 155728-0030 | ITT Interconnect Solutions | Connector Miniature Circular PIN 85 Position Solder Cup Straight Cable Mount 85 Terminal 1 Port RoHS : Compliant |
| 0 | ||
| 121468-0038 | ITT Interconnect Solutions | Circular Connector - Front Box Mount - Contact Arangement: 20-33 - Pins - Threaded Coupling - Endbell w/Cable Clamp RoHS : Compliant |
| 0 | ||
 Neutron USA | P018-003 | Tripp Lite | Tripp Lite Heavy Duty Computer Power Cord RoHS : Compliant |
| 588 | |
| U428-003-CRA | Tripp Lite | 3FT USB C TO USB-A CABLE 3.1 5GBPS RIGHT ANGLE USB TYPE C M/M RoHS : Compliant |
| 233 | ||
U038-003 | Tripp Lite | Tripp Lite USB 2.0 Hi-Speed Cable A Male to USB Type-C USB-C Male 3' 3ft RoHS : Compliant |
| 121 | ||
| U038-003-CRA | Tripp Lite | 3FT USB 2.0 CABLE USB-A TO USB C USB TYPE C M/M RIGHT-ANGLE RoHS : Compliant |
| 50 | ||
| A3L980-03-BLK | Belkin | 3-FOOT CAT6 BLACK CABLES, NO BOOTS |
| 19 | ||
| 73-778-003 | Advanced Energy Industries Inc | Modular Power Supplies - Accessories Module Accessory Kit |
| 18 | ||
| 0800304 | Phoenix Contact | Wire Labels & Markers WMS 9,5 (EX16)R YE |
| 3 | ||
| 0800398 | Phoenix Contact | Terminal Block Tools & Accessories WMS 2,4 (60X4)R YE |
| 0 | ||
| U280-032-RM | Tripp Lite | 32PORT USB CHARGING STATION HUB W/ SYNCING TABLET SMARTPHONE 2U |
| 0 | ||
| 2800334 | Phoenix Contact | Knife Disconnect Terminal Block w/screw conn,W:6.2mm,gray,UKK 5-MTK-P/P-DIO/OL-U RoHS : Compliant |
| 0 | ||
| 0800375 | Phoenix Contact | Terminal Block Tools & Acces. WMS 4,8 (30X9)R, LABEL HEAT SHRINKABLE WHITE, Shrink sleeve, Polyolefine RoHS : Compliant |
| 0 | ||
0800360 | Phoenix Contact | Anti-Static Control Products EMLPR (26,5X17,5) |
| 0 | ||
| 0800397 | Phoenix Contact | Shrink Sleeve, Roll, white, 15x9mm field, 10k labels/roll, WMS 4,8 (15X9)RXL, Price per roll RoHS : Compliant |
| 0 | ||
| 0800389 | Phoenix Contact | Shrink sleeve, Roll, white, cable dia 0.8-2.4mm, 15x4mm field, 4kLabel/roll, WMS 2,4 (15X4)RL, Price per roll RoHS : Compliant |
| 0 | ||
| 0800367 | Phoenix Contact | Shrink sleeve, Roll, white, Cable Marker, 60 x 10 mm field, WMS 6,4 (60X10)R, 1 roll per sale RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3TC0800-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-VNA-HF, RF Cable Type: PE-VNA-HF, RF Cable Impedance: 50 Ohm, Length: 36 inches. 1.85mm Male to 1.85mm Male Precision Cable 36 Inch Length Using High Flex VNA Test Coax., Radio frequency assembly 1.85mm male to 1.85mm male precision cable 36 inch length using high flex VNA test coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 1.85mm male to 1.85mm male precision cable 36 inch length using high flex VNA test coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.85mm to 1.85mm cable assembly orders will ship same day as well. Pasternack RF coax precision cable assembly is built with 1.85mm cable connection on one end and 1.85mm cable connection on the other. Our precision 1.85mm to 1.85mm cable assemblies have a male gender on end 1 and male on end 2. This 1.85mm to 1.85mm cable is a male to male coax assembly, PE3TC0800-36, can also be known as a precision 1.85mm plug to 1.85mm plug cable assembly and will be shipped same-day as it is purchased. 1.85mm plug to 1.85mm plug cable assembly PE3TC0800-36 is built with PE-VNA-HF which is a flexible coax type. The Pasternack flexible 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 70 GHz maximum frequency 1.85mm male to 1.85mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Precision 1.85mm plug to 1.85mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 1.85mm male to 1.85mm male precision cable 36 inch length using high flex VNA test coax. |
| 5 | |
| PE3W08003 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Female Bulkhead to SMA Male Right Angle Cable Using RG174 Coax. PE3W08003 is a reverse polarity TNC female bulkhead to SMA male right angle cable using RG174 coax. This Pasternack reverse polarity TNC female bulkhead to SMA male right angle cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. TNC to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity female TNC bulkhead to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08003 TNC reverse polarity female bulkhead to SMA male right angle cable assembly is constructed with RG174 coax. | 0 | |||
| PE3C8003 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. NEX10 Male to NEX10 Male Low PIM Cable Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly NEX10 male to NEX10 male low PIM cable using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 male low PIM cable using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM NEX10 to NEX10 cable assembly has a male gender on end 1 and a male on end 2. PE3C8003 can also be known as a low PIM NEX10 plug to NEX10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.472-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8003 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our NEX10 male to NEX10 male cable has a maximum VSWR of 1.4:1. NEX10 plug to NEX10 plug cable assembly PE3C8003 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with silver plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 plug to NEX10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. | 0 | |||
| PE3800-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Male Right Angle to SMA Female Bulkhead Cable 36 Inch Length Using RG223 Coax., Radio frequency assembly SMA male right angle to SMA female bulkhead cable 36 inch length using RG223 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA female bulkhead cable 36 inch length using RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA bulkhead cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3800-36, can also be known as a right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3800-36 is built with RG223 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 12.4 GHz maximum frequency SMA right angle male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3800-36 can also be used in the other direction and will be SMA female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA female bulkhead cable 36 inch length using RG223 coax. |
| 0 | ||
| PE3C8003-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 39.37 inches. NEX10 Male to NEX10 Male Low PIM Cable 100 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly NEX10 male to NEX10 male low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 male low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM NEX10 to NEX10 cable assembly has a male gender on end 1 and a male on end 2. PE3C8003-100CM can also be known as a low PIM NEX10 plug to NEX10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.472-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8003-100CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our NEX10 male to NEX10 male cable has a maximum VSWR of 1.4:1. NEX10 plug to NEX10 plug cable assembly PE3C8003-100CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with silver plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 plug to NEX10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8003-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. NEX10 Male to NEX10 Male Low PIM Cable 12 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly NEX10 male to NEX10 male low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 male low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM NEX10 to NEX10 cable assembly has a male gender on end 1 and a male on end 2. PE3C8003-12 can also be known as a low PIM NEX10 plug to NEX10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.472-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8003-12 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our NEX10 male to NEX10 male cable has a maximum VSWR of 1.4:1. NEX10 plug to NEX10 plug cable assembly PE3C8003-12 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with silver plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 plug to NEX10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8003-150CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 59.06 inches. NEX10 Male to NEX10 Male Low PIM Cable 150 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly NEX10 male to NEX10 male low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 male low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM NEX10 to NEX10 cable assembly has a male gender on end 1 and a male on end 2. PE3C8003-150CM can also be known as a low PIM NEX10 plug to NEX10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.472-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8003-150CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our NEX10 male to NEX10 male cable has a maximum VSWR of 1.4:1. NEX10 plug to NEX10 plug cable assembly PE3C8003-150CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with silver plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 plug to NEX10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8003-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 78.74 inches. NEX10 Male to NEX10 Male Low PIM Cable 200 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly NEX10 male to NEX10 male low PIM cable 200 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 male low PIM cable 200 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM NEX10 to NEX10 cable assembly has a male gender on end 1 and a male on end 2. PE3C8003-200CM can also be known as a low PIM NEX10 plug to NEX10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.472-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8003-200CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our NEX10 male to NEX10 male cable has a maximum VSWR of 1.4:1. NEX10 plug to NEX10 plug cable assembly PE3C8003-200CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with silver plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 plug to NEX10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8003-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. NEX10 Male to NEX10 Male Low PIM Cable 24 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly NEX10 male to NEX10 male low PIM cable 24 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 male low PIM cable 24 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM NEX10 to NEX10 cable assembly has a male gender on end 1 and a male on end 2. PE3C8003-24 can also be known as a low PIM NEX10 plug to NEX10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.472-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8003-24 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our NEX10 male to NEX10 male cable has a maximum VSWR of 1.4:1. NEX10 plug to NEX10 plug cable assembly PE3C8003-24 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with silver plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 plug to NEX10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8003-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. NEX10 Male to NEX10 Male Low PIM Cable 36 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly NEX10 male to NEX10 male low PIM cable 36 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 male low PIM cable 36 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM NEX10 to NEX10 cable assembly has a male gender on end 1 and a male on end 2. PE3C8003-36 can also be known as a low PIM NEX10 plug to NEX10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.472-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8003-36 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our NEX10 male to NEX10 male cable has a maximum VSWR of 1.4:1. NEX10 plug to NEX10 plug cable assembly PE3C8003-36 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with silver plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 plug to NEX10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8003-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. NEX10 Male to NEX10 Male Low PIM Cable 48 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly NEX10 male to NEX10 male low PIM cable 48 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 male low PIM cable 48 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM NEX10 to NEX10 cable assembly has a male gender on end 1 and a male on end 2. PE3C8003-48 can also be known as a low PIM NEX10 plug to NEX10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.472-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8003-48 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our NEX10 male to NEX10 male cable has a maximum VSWR of 1.4:1. NEX10 plug to NEX10 plug cable assembly PE3C8003-48 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with silver plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 plug to NEX10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8003-50CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 19.68 inches. NEX10 Male to NEX10 Male Low PIM Cable 50 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly NEX10 male to NEX10 male low PIM cable 50 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 male low PIM cable 50 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM NEX10 to NEX10 cable assembly has a male gender on end 1 and a male on end 2. PE3C8003-50CM can also be known as a low PIM NEX10 plug to NEX10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.472-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8003-50CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our NEX10 male to NEX10 male cable has a maximum VSWR of 1.4:1. NEX10 plug to NEX10 plug cable assembly PE3C8003-50CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with silver plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 plug to NEX10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8003-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. NEX10 Male to NEX10 Male Low PIM Cable 60 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly NEX10 male to NEX10 male low PIM cable 60 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 male low PIM cable 60 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM NEX10 to NEX10 cable assembly has a male gender on end 1 and a male on end 2. PE3C8003-60 can also be known as a low PIM NEX10 plug to NEX10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.472-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8003-60 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our NEX10 male to NEX10 male cable has a maximum VSWR of 1.4:1. NEX10 plug to NEX10 plug cable assembly PE3C8003-60 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with silver plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 plug to NEX10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3W12800-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.2-5, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: QMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 2.2-5 Male to QMA Male Low PIM Cable 36 Inch Length Using TFT-5G-402 Coax With Times Microwave Parts., Radio frequency assembly 2.2-5 male to QMA male low PIM cable 36 inch length using TFT-5G-402 coax with Times Microwave parts from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.2-5 male to QMA male low PIM cable 36 inch length using TFT-5G-402 coax with Times Microwave parts, 2.2-5 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.2-5 to QMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 2.2-5 cable connection on one end and QMA cable connection on the other. Our low PIM 2.2-5 to QMA cable assemblies have a male gender on end 1 and male on end 2. PE3W12800-36 can also be known as a low PIM 2.2-5 plug to QMA plug cable assembly and will be shipped same-day as it is purchased. 2.2-5 plug to QMA plug cable assembly PE3W12800-36 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 2.2-5 cable assembly is manufactured with 2.2-5 to QMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency low PIM 2.2-5 male to QMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W12800-36 can also be used in the other direction and will be QMA male to 2.2-5 male cable assembly if the opposite connectivity is required. Low PIM 2.2-5 plug to QMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to QMA cable assembly for quick shipment worldwide. Variations of 2.2-5 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.2-5 male to QMA male low PIM cable 36 inch length using TFT-5G-402 coax with Times Microwave parts. |
| 0 | ||
| PE3W16800-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: F, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tinned Copper, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 50 Ohm SHV Jack to 75 Ohm F Male Cable 36 Inch Length Using 75 Ohm RG59 Coax., Radio frequency assembly 50 Ohm SHV jack to 75 Ohm F male cable 36 inch length using 75 Ohm RG59 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 50 Ohm SHV jack to 75 Ohm F male cable 36 inch length using 75 Ohm RG59 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SHV to type F cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SHV cable connection on one end and a type F cable connection on the other. Our SHV to type F cable assembly has a jack gender on end 1 and a male on end 2. PE3W16800-36 can also be known as a SHV female to type F plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. Our PE3W16800-36 RF cable has a PVC (NC) jacket of 0.242-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -25 to 70 degrees C. The flexible RF cable has a between series connection. Our SHV jack to type F male cable has a maximum VSWR of 1.4:1. SHV female to type F plug cable assembly PE3W16800-36 is built with RG59 which is a flexible coax type. The Pasternack flexible SHV cable assembly is manufactured with SHV to type F cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W16800-36 can also be used in the other direction and will be a type F male to SHV jack cable assembly if the opposite connectivity is required. SHV female to type F plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SHV to type F cable assembly for quick shipment worldwide. Variations of SHV and type F cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SHV to type F RF cable assembly as per your requirements. |
| 0 | ||
 TE Connectivity | 2-748003-0 | TE Connectivity | 09 PLUG SP/FMS BRDLK Number of Positions: 9 Connector & Housing Type: Plug Connector System: Board-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 1 D-Shaped Connector | 9 Plug Board-to-Board Board Mount | Part Number: 2-748003-0 | Internal Number: 2-748003-0 | 1 | TE Connectivity RoHS : Compliant |
| 600 | |
| 5148003-5 | TE Connectivity | ASSY,PIN,EUROCARD,TYPE C,LEAD-FREE,96 PO Eurocard Connector | Part Number: 5148003-5 | Internal Number: 5148003-5 | TE Connectivity RoHS : Compliant |
| 260 | ||
| 1SNG608003R0000 | TE Connectivity | EM-LN-M20-MET-A Cable Gland Product Type: Lock Nut Primary Product Material: Brass Primary Product Plating Material: Nickel Outer Thread Type: Metric Outer Thread Size: M20 x 1.5 Lock Nut Brass Nickel Metric | Metal Locknut | Part Number: 1SNG608003R0000 | Internal Number: 1SNG608003R0000 | TE Connectivity RoHS : Compliant |
| 93 | ||
| 2292800-3 | TE Connectivity | AS16,PLUG BACKSHELL KIT,ST,06P,NC12 Number of Positions: 6 Primary Product Color: Black Protection & Strain Relief Accessory Type: Backshell Kit Primary Product Material: PA 66/6 Cable Exit Angle: 180 ° Ampseal 16 Connectors Backshell | 6 Black Backshell Kit PA 66/6 | Part Number: 2292800-3 | Internal Number: 2292800-3 | Alias Number: AS16-ST-60-06-ST-NC12 | TE Connectivity RoHS : Compliant |
| 79 | ||
| T2580032154-000 | TE Connectivity | PIN-Q2-F Contact Type: Socket Rectangular Connector Insert Type: Insert for Contacts Pole Configuration: 4 Wire Size: 26 – 14 AWG Contact Current Rating (Max): 10 A Socket Insert for Contacts 4 26 – 14 AWG | Hdc Hmn Modular System & Rail Compliant | Part Number: T2580032154-000 | Internal Number: T2580032154-000 | TE Connectivity RoHS : Compliant |
| 40 | ||
| T4052228003-002 | TE Connectivity | RPC-M8-3MR-1.0-M12-3FR-PUR Cable Assembly Type: M8 to M12 Number of Positions: 3 Cable Assembly Length: 1 m Cable Assembly Length: 3.2 ft M8/M12 Application Type: Sensor/Actuator M8 to M12 3 1 m 3.2 ft | M8 Male R/a To M12 Female R/a Cable Assembly | Part Number: T4052228003-002 | Internal Number: T4052228003-002 | TE Connectivity RoHS : Compliant |
| 30 | ||
| HD18-003 | TE Connectivity | BACK SHELL Number of Positions: 3 Primary Product Color: Gray Protection & Strain Relief Accessory Type: Backshell Primary Product Material: Plastic Cable Exit Angle: 180 ° Automotive Connector Cap & Cover | 3 Gray Backshell Plastic | Part Number: HD18-003 | Internal Number: HD18-003 | Alias Number: ZPF000000000131682 | TE Connectivity RoHS : Compliant |
| 25 | ||
| T4052218003-001 | TE Connectivity | RPC-M8-3MR-0.5-M12-3FR-PVC Cable Assembly Type: M8 to M12 Number of Positions: 3 Cable Assembly Length: .5 m Cable Assembly Length: 1.6 ft M8/M12 Application Type: Sensor/Actuator M8 to M12 3 .5 m 1.6 ft | M8 Male R/a To M12 Female R/a Cable Assembly | Part Number: T4052218003-001 | Internal Number: T4052218003-001 | TE Connectivity RoHS : Compliant |
| 18 | ||
| T4161420008-003 | TE Connectivity | RPC-M12-FR-8CON-PUR-1.5SH Cable Assembly Type: M12 Pigtail Number of Positions: 8 Cable Assembly Length: 1.5 m Cable Assembly Length: 4.9 ft M8/M12 Application Type: Sensor/Actuator M12 Pigtail 8 1.5 m 4.9 ft | M12 A-Code Pigtail & Female & R/a & Single Ended Cable | Part Number: T4161420008-003 | Internal Number: T4161420008-003 | TE Connectivity RoHS : Compliant |
| 5 | ||
 Vyrian | ADV8003KBCZ-8C | Analog Devices Inc | Consumer Circuit, CMOS, PBGA425 RoHS : Compliant | 11,743 | ||
| 5962L9468003VHA | Analog Devices Inc | Operational Amplifier, 1 Func, 100uV Offset-Max, CDFP10 RoHS : Not Compliant | 11,012 | |||
| AD8003ACPZ-REEL | Analog Devices Inc | Operational Amplifier, 3 Func RoHS : Compliant | 10,679 | |||
M38510/38003B2X | Texas Instruments | Binary Counter, ALS Series, Synchronous, Positive Edge Triggered, 4-Bit, Bidirectional, TTL, CQCC20 | 9,377 | |||
5962-9078003MKX | Texas Instruments | Bus Driver, AS Series, 1-Func, 8-Bit, True Output, CMOS, CDFP24 | 9,267 | |||
5962-9078003M3X | Texas Instruments | Bus Driver, AS Series, 1-Func, 8-Bit, True Output, CMOS, CQCC28 | 8,842 | |||
| BC035-24-A-0380-0300-L-G | Global Connector Technology | Board Connector, 24 Contact(s), 2 Row(s), Male, Straight, 0.039 inch Pitch, Solder Terminal, Locking, Black Insulator RoHS : Compliant | 8,262 | |||
| ADV8003KBCZ-7 | Analog Devices Inc | Consumer Circuit, CMOS, PBGA425 RoHS : Compliant | 7,944 | |||
| SN74ALS8003FN | Texas Instruments | NAND Gate, TTL, PQCC20 RoHS : Not Compliant | 7,781 | |||
| SN74ALS8003FN-00 | Texas Instruments | NAND Gate, ALS Series, 2-Func, 2-Input, TTL, PQCC20 | 5,532 | |||
| F280037SPM | Texas Instruments | RISC Microcontroller, 32-Bit, FLASH, C28X CPU, 120MHz, CMOS, PQFP64 RoHS : Compliant | 4,317 | |||
| F280037CSPTR | Texas Instruments | RISC Microcontroller, 32-Bit, FLASH, C28X CPU, 120MHz, CMOS, PQFP48 RoHS : Compliant | 3,765 | |||
SN74ALS8003AP | Texas Instruments | NAND Gate, ALS Series, 2-Func, 2-Input, TTL, PDIP8 RoHS : Not Compliant | 3,075 | |||
| P018-003 | Tripp Lite | Cable Assembly RoHS : Compliant | 421 | |||
| U038-003 | Tripp Lite | Cable Assembly RoHS : Compliant | 384 | |||
 Waytek, Inc. | 19038-0037 | Molex | 22-18 GA Female .156 Bullet Nylon Insulated Terminal |
| 28,577 | |
 Win Source Electronics | PZ2012D800-3R0TF | Sunlord | RoHS : Compliant |
| 762,560 | |
| 0468003.NR | Littelfuse Inc | FUSE BOARD MNT 3A 32VAC/VDC 1206 RoHS : Compliant |
| 156,688 | ||
| PAM8003DR | Diodes Incorporated | IC AMP AUDIO 2.5W CLASS D 16SOIC RoHS : Compliant |
| 54,950 | ||
| F280039CSPZ | Texas Instruments | IC MCU 32BIT 384KB FLASH 100LQFP / C28x - Microcontroller IC 32-Bit Single-Core 120MHz 384KB (192K x 16) FLASH 100-LQFP (14x14) RoHS : Compliant |
| 18,530 | ||
| F280039CSPN | Texas Instruments | IC MCU 32BIT 384KB FLASH 80LQFP RoHS : Compliant |
| 18,330 | ||
| 0438003.WRA | Littelfuse Inc | FUSE BRD MNT 3A 12VAC 32VDC 0603 RoHS : Compliant |
| 9,000 | ||
| 0448003.MR | Littelfuse Inc | FUSE BRD MNT 3A 125VAC/VDC 2SMD RoHS : Compliant |
| 6,000 | ||
| LTM8003IY | Analog Devices Inc | DC DC CONVERTER 0.97-18V / Non-Isolated PoL Module DC DC Converter 1 Output 0.97 ~ 18V 3.5A 3.4V - 40V Input RoHS : Not Compliant |
| 2,807 | ||
| LTM8003IY#PBF | Linear Technology | DC DC CONVERTER 0.97-18V 3.5A RoHS : Compliant |
| 2,680 | ||
| AT91M40800-33AU | Atmel Corporation | IC MCU 32BIT ROMLESS 100LQFP RoHS : Compliant |
| 1,815 | ||
| AT91M40800-33AU-999 | Microchip Technology Inc | IC MCU 16/32BIT ROMLESS 100LQFP RoHS : Compliant |
| 1,700 | ||
| AD8003ACPZ | Analog Devices Inc |
| 1,318 | |||
| LTM8003HY | Analog Devices Inc | DC DC CONVERTER 0.97-18V RoHS : Not Compliant |
| 1,000 | ||
| ADV8003KBCZ-8C | Analog Devices Inc | IC VIDEO PROCESSOR 425CSPBGA / Video Processor IC 425-CSPBGA (19x19) Package RoHS : Compliant |
| 400 | ||
| LTM8003HY#PBF | Analog Devices Inc | Module DC-DC 1-OUT 0.97V to 18V 3.5A Automotive 48-Pin BGA Tray RoHS : Compliant |
| 310 |
| Czy Alldatasheet okazała się pomocna? [ DONATE ] |
O Alldatasheet | Reklama | Kontakt | Polityka prywatności | Link do karty katalogowej | Linki | Lista producentów All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Polish ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Vietnamese
Indian
Mexican
British
New Zealand