800CCNFNNFZCWC Price, sprzedawcę, Stock

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to SMA Male Low PIM Cable 12 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly SMA male to SMA male low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low PIM SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3C8008-12, can also be known as a low PIM SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C8008-12 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency low PIM SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components.

1 : $62.99
25 : $59.84
50 : $56.69
100 : $54.17

174

PE3C8001-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to N Female Low PIM Cable 24 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly N male to N female low PIM cable 24 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to N female low PIM cable 24 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low PIM type N to type N cable assembly has a male gender on end 1 and a female on end 2. PE3C8001-24 can also be known as a low PIM type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.808-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. type N low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8001-24 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C8001-24 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8001-24 can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements.

1 : $74.99
25 : $71.24
50 : $67.49
100 : $64.49

PE3C8004-100CM

Pasternack Enterprises

Key Specifications, Connector Series 1: NEX10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: NEX10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. NEX10 Male to NEX10 Male Right Angle Low PIM Cable 100 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly NEX10 male to NEX10 male right angle low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. NEX10 male to NEX10 male right angle low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom NEX10 to NEX10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with NEX10 cable connection on one end and right angle NEX10 cable connection on the other. Our low PIM NEX10 to right angle NEX10 cable assemblies have a male gender on end 1 and male on end 2. This NEX10 to NEX10 cable is a male to male coax assembly, PE3C8004-100CM, can also be known as a low PIM NEX10 plug to right angle NEX10 plug cable assembly and will be shipped same-day as it is purchased. NEX10 plug to NEX10 plug cable assembly PE3C8004-100CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible NEX10 cable assembly is manufactured with NEX10 to right angle NEX10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency low PIM NEX10 male to NEX10 right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8004-100CM can also be used in the other direction and will be right angle NEX10 male to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to NEX10 right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this NEX10 male to NEX10 male right angle low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components.

1 : $105.99
25 : $100.69
50 : $95.39
100 : $91.15

PE3C8005-24

Pasternack Enterprises

Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length: 24 inches. QMA Male to QMA Male Low PIM Cable 24 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly QMA male to QMA male low PIM cable 24 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. QMA male to QMA male low PIM cable 24 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QMA to QMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with QMA cable connection on one end and QMA cable connection on the other. Our low PIM QMA to QMA cable assemblies have a male gender on end 1 and male on end 2. This QMA to QMA cable is a male to male coax assembly, PE3C8005-24, can also be known as a low PIM QMA plug to QMA plug cable assembly and will be shipped same-day as it is purchased. QMA plug to QMA plug cable assembly PE3C8005-24 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible QMA cable assembly is manufactured with QMA to QMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency low PIM QMA male to QMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM QMA plug to QMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QMA to QMA cable assembly for quick shipment worldwide. Variations of QMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QMA male to QMA male low PIM cable 24 inch length using TFT-5G-402 coax using Times Microwave components.

1 : $68.99
25 : $65.54
50 : $62.09
100 : $59.33

PE6800

Pasternack Enterprises

Key Specifications, Maximum Power: 0.5 Watt, Waveguide Size: WR-28, Minimum Frequency: 26.5 GHz, Maximum Frequency: 40 GHz, Impedance: 50 Ohm. 0.5 Watts Low Power WR-28 Waveguide Load 26.5 GHz to 40 GHz. PE6800 0.5 Watts low power waveguide load (also known as waveguide termination) has a WR-28 input. This Pasternack WR-28 waveguide load / termination is rated for a minimum frequency of 26.5 GHz and a maximum frequency of 40 GHz. Our WR-28 waveguide terminator has a maximum input power of 0.5 Watts. WR-28 waveguide load / termination PE6800 has an average maximum VSWR of 1.3:1. This Pasternack WR-28 low power waveguide termination / load is part of over 40,000 in-stock RF, microwave and millimeter wave components. Our WR-28 load ships same day as purchased worldwide as with our other RF parts.

1 : $665.0
10 : $638.4
25 : $611.8

PE3C8003-200CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 78.74 inches. NEX10 Male to NEX10 Male Low PIM Cable 200 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly NEX10 male to NEX10 male low PIM cable 200 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 male low PIM cable 200 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM NEX10 to NEX10 cable assembly has a male gender on end 1 and a male on end 2. PE3C8003-200CM can also be known as a low PIM NEX10 plug to NEX10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.472-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8003-200CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our NEX10 male to NEX10 male cable has a maximum VSWR of 1.4:1. NEX10 plug to NEX10 plug cable assembly PE3C8003-200CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with silver plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 plug to NEX10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements.

1 : $115.99
25 : $110.19
50 : $104.39
100 : $99.75

PE70A8002

Pasternack Enterprises

Key Specifications, Design: Relay Controlled, Maximum Frequency: 2 GHz, Impedance: 50 Ohm, Power Maximum: 0.5 Watt, Connector Series 1: SMA, Connector Gender 1: Female, Connector Series 2: SMA, Connector Gender 2: Female, Minimum Attenuation: 0 dB, Maximum Attenuation: 63.75 dB, Switching Time: 6,000,000 ns. 8 Bit Relay Controlled Programmable Attenuator, 63.75 dB Up to 2 GHz, 0.25 dB Steps, +12V, SMA Female. PE70A8002 is a programmable attenuator from Pasternack. Our SMA attenuator is a programmable step attenuator design. This 50 Ohm adjustable attenuator is precision manufactured to RF and microwave industry specifications. The Pasternack programmable attenuator has a female gender for connector 1 and a SMA female for connector 2. PE70A8002 programmable step attenuator has a minimum attenuation of 0 dB and a maximum attenuation of 63.75 dB with 8dB step sizes. Our programmable RF attenuator has frequency range of DC to 2 GHz and a maximum VSWR of 0. This adjustable SMA attenuator is rated to 0.5 Watt at the stated attenuation. Our attenuator PE70A8002 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This RF programmable attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $2,380.0
5 : $2,284.8
10 : $2,189.6

PE70A8008

Pasternack Enterprises

Key Specifications, Design: Relay Controlled, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Connector Series 1: 2.92mm, Connector Gender 1: Female, Connector Series 2: 2.92mm, Connector Gender 2: Female, Switching Time: 200 ns. TTL Controlled Programmable Attenuator, 31 dB, from 100 MHz to 40 GHz, 1 dB Steps, 2.92mm Female. PE70A8008 is a programmable attenuator from Pasternack. Our 2.92mm attenuator is a programmable step attenuator design. This 50 Ohm adjustable attenuator is precision manufactured to RF and microwave industry specifications. The Pasternack programmable attenuator has a female gender for connector 1 and a 2.92mm female for connector 2. PE70A8008 programmable step attenuator has a minimum attenuation of 0 dB and a maximum attenuation of 0 dB with 0dB step sizes. Our programmable RF attenuator has frequency range of 100 MHz to 40 GHz and a maximum VSWR of 0. This adjustable SMA attenuator is rated to 0 Watt at the stated attenuation. Our attenuator PE70A8008 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This RF programmable attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $7,520.0
5 : $7,219.2
10 : $6,918.4
25 : $6,617.6

PE71S8009

Pasternack Enterprises

Key Specifications, Connector Series: SMA, Connector Gender: Female, Switch Design: Absorptive, Minimum Frequency: 20 MHz, Maximum Frequency: 6 GHz, Impedance: 50 Ohm, Maximum Input Power: 20 Watts, Maximum Input VSWR: 1.8:1, Maximum Insertion Loss: 2.5 dB, Minimum Isolation: 55 dB. Absorptive SPDT PIN Diode Swtich Operating from 20 MHz to 6 GHz up to +26 dBm Hot Switching and SMA. PE71S8009 PIN diode switch from Pasternack is a Absorptive design. Our RF Absorptive PIN diode switch uses SMA connectors at 50 Ohm. This SMA PIN diode Absorptive switch has a minimum frequency of 20 MHz and a maximum frequency of 6 GHz. The Pasternack PIN diode Absorptive RF switch is rated at a switching speed of ns and a maximum input power of 20 Watts (+43 dBm ). Insertion loss maximum of this SMA Absorptive switch is 2.5 dB with an isolation minimum of 55 dB. Absorptive PIN diode radio frequency switch PE71S8009 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our Absorptive SMA coaxial PIN diode switch can ship worldwide the same day that it is bought as with our other available RF parts.

1 : $1,710.0
5 : $1,641.6
10 : $1,573.2
25 : $1,504.8

PE44800

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: 1.85mm, Connector Gender: Female, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Clamp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 65 GHz, Interface Type 1: PE-047SR, Interface Type 2: PE-SR047AL, Interface Type 3: PE-SR047FL. 1.85mm Female Precision Connector Clamp/Solder Attachment for PE-047SR, PE-SR047AL, PE-SR047FL. PE44800 1.85mm female coaxial connector has an interface type of PE-047SR, PE-SR047AL, PE-SR047FL and a 50 Ohm impedance. Pasternack 1.85mm female connector uses shield/contact clamp/solder as an attachment method. Our female 1.85mm coaxial connector provides a minimum frequency of DC and a maximum frequency of 65 GHz. The Pasternack 1.85mm coaxial connector has a passivated stainless steel body. Our PE44800 1.85mm connector uses beryllium copper contact. This 1.85mm female coaxial RF connector is RoHS and REACH compliant. This Pasternack female 1.85mm connector will ship the same day as purchased. Our 1.85mm female connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom 1.85mm connector cable assemblies that will ship the same day as well.

1 : $259.99
10 : $249.59
25 : $239.19

PE35800LF

Pasternack Enterprises

PE3W08800LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm. N Male to N Male Right Angle Cable Using LMR-600-DB Coax with HeatShrink, LF Solder. PE3W08800LF/HS is a N male to N male right angle cable using LMR-600-DB coax. This Pasternack N male to N male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08800LF/HS N male to N male right angle cable assembly is constructed with LMR-600-DB coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W15800

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. N Male to SMA Male Right Angle Cable Using PE-SR405FLJ Coax. PE3W15800 is a N male to SMA male right angle cable using PE-SR405FLJ coax. This Pasternack N male to SMA male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. N to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N to male SMA right angle cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W15800 N male to SMA male right angle cable assembly is constructed with PE-SR405FLJ coax.

PE3W02800/HS

Pasternack Enterprises

PE3W20800

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMB Plug Cable Using PE-P086HF Coax. PE3W20800 is a SMA male right angle to SMB plug cable using PE-P086HF coax. This Pasternack SMA male right angle to SMB plug cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMB for connector 2. SMA right angle to SMB coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to plug SMB cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20800 SMA male right angle to SMB plug cable assembly is constructed with PE-P086HF coax.

TE Connectivity

EP8858-000

TE Connectivity

ESZH-CAP-NO.1-40MM Wall Type: Dual Wall Adhesive Requirement: Adhesive Precoat Operating Temperature Range: -40 – 125 °C Operating Temperature Range: -40 – 257 °F Dual Wall Adhesive Precoat | End Cap | Part Number: EP8858-000 | Internal Number: EP8858-000 | TE Connectivity
RoHS : Compliant

20,000 : $0.11
10,000 : $0.14
5,000 : $0.19
2,000 : $0.25
1,000 : $0.38
100 : $0.46

29,997

2380000-2

TE Connectivity

SMB HEADER, ASSEMBLY Connector System: Flex-to-Board Sealable: No Shielded: Yes PCB Mount Orientation: Vertical Number of Positions: 1 Flex-to-Board Vertical | Data Connectivity Header | Part Number: 2380000-2 | Internal Number: 2380000-2 | TE Connectivity
RoHS : Compliant

20,000 : $0.67
10,000 : $0.84
5,000 : $1.12
2,000 : $1.49
1,000 : $2.24
100 : $2.69

5,455

2380000-1

TE Connectivity

SMB HEADER, ASSEMBLY Connector System: Flex-to-Board Sealable: No Shielded: Yes PCB Mount Orientation: Vertical Number of Positions: 1 Flex-to-Board Vertical | Data Connectivity Header | Part Number: 2380000-1 | Internal Number: 2380000-1 | TE Connectivity
RoHS : Compliant

20,000 : $0.9
10,000 : $1.12
5,000 : $1.49
2,000 : $1.99
1,000 : $2.99
100 : $3.58

4,808

20026498-00

TE Connectivity

NTC,10K ,SS HEX HSG,TEMP,SENSOR NTC Probe Type: NTC Probe Electrical Connection: Connector 2 Pin Resistance (at 25°C): 10000 kΩ β-Value(25/85): 3976 K Accuracy (at T_ref): ± .5 °C NTC Probe Connector 2 Pin | Part Number: 20026498-00 | Internal Number: 20026498-00 | TE Connectivity
RoHS : Compliant

1 : $28.67

498

5208009-1

TE Connectivity

HD-20 PLUG 37P VERT Number of Positions: 37 Connector & Housing Type: Plug Connector System: Board-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 4 D-Shaped Connector | 37 Plug Board-to-Board Board Mount | Part Number: 5208009-1 | Internal Number: 5208009-1 | 4 | TE Connectivity
RoHS : Compliant

1,000 : $11.96
500 : $12.3
250 : $12.68
100 : $13.11
50 : $13.49
1 : $14.81

294

T2030012008-000

TE Connectivity

DEF-0.75 Contact Mating Area Plating Material: Gold (Au) Contact Type: Socket Wire Contact Termination Area Plating Material: Gold Wire Size: 18 AWG Wire Size: .75 mm² Gold (Au) Socket 18 AWG | Connector Contact | Part Number: T2030012008-000 | Internal Number: T2030012008-000 | TE Connectivity
RoHS : Compliant

1,000 : $6.54
500 : $6.74
250 : $6.94
100 : $7.14
50 : $7.34
25 : $7.53
10 : $7.73
1 : $7.93

178004-1

TE Connectivity

FF 250 PLUG HSG 4P NYLON NAT Terminal Type: Tab Number of Positions: 4 Centerline (Pitch): .216 in Centerline (Pitch): 5.5 mm Terminal Orientation: Straight Tab 4 .216" 5.5 mm | Crimp Terminal Housing | Part Number: 178004-1 | Internal Number: 178004-1 | .216" | TE Connectivity
RoHS : Compliant

1,000 : $0.56
100 : $0.75
10 : $0.92
1 : $1.17

CJP800J1K0J

TE Connectivity

CJP 800W 1K0 5% Lead Resistance Value: 1K Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: 1kΩ – 1MΩ Chassis Mount Resistor | 1K Ω Wire Wound 5 % Power Resistor | Part Number: CJP800J1K0J | Internal Number: 3-2176512-3 | TE Connectivity
RoHS : Compliant

1 : $215.79

T4162114008-001

TE Connectivity

RPC-M12-8MS-0.5SH-M12-8FR-PVC Cable Assembly Type: M12 to M12 Number of Positions: 8 Cable Assembly Length: .5 m Cable Assembly Length: 1.6 ft M8/M12 Application Type: Sensor/Actuator M12 to M12 8 .5 m 1.6 ft | M12 A-Code Male Straight To Female Double Ended Cable | Part Number: T4162114008-001 | Internal Number: T4162114008-001 | TE Connectivity
RoHS : Compliant

100 : $65.54
50 : $68.65
25 : $71.77
10 : $74.9
1 : $78.02

CJP800J820RJ

TE Connectivity

CJP 800W 820R 5% Lead Resistance Value: 820 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Chassis Mount Resistor | 820 Ω Wire Wound 5 % Power Resistor | Part Number: CJP800J820RJ | Internal Number: 3-2176512-2 | TE Connectivity
RoHS : Compliant

1 : $215.79

CJP800J560RJ

TE Connectivity

CJP 800W 560R 5% Lead Resistance Value: 560 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Chassis Mount Resistor | 560 Ω Wire Wound 5 % Power Resistor | Part Number: CJP800J560RJ | Internal Number: 3-2176512-0 | TE Connectivity
RoHS : Compliant

1 : $215.79

CJP800J47RJ

TE Connectivity

CJP 800W 47R 5% Lead Resistance Value: 47 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Chassis Mount Resistor | 47 Ω Wire Wound 5 % Power Resistor | Part Number: CJP800J47RJ | Internal Number: 1-2176512-7 | TE Connectivity
RoHS : Compliant

1 : $215.79

T4161410008-002

TE Connectivity

RPC-M12-FR-8CON-PVC-1.0SH Cable Assembly Type: M12 Pigtail Number of Positions: 8 Cable Assembly Length: 1 m Cable Assembly Length: 3.2 ft M8/M12 Application Type: Sensor/Actuator M12 Pigtail 8 1 m 3.2 ft | M12 A-Code Pigtail & Female & R/a & Single Ended Cable | Part Number: T4161410008-002 | Internal Number: T4161410008-002 | TE Connectivity
RoHS : Compliant

1 : $45.04

CJP800J68RJ

TE Connectivity

CJP 800W 68R 5% Lead Resistance Value: 68 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Chassis Mount Resistor | 68 Ω Wire Wound 5 % Power Resistor | Part Number: CJP800J68RJ | Internal Number: 1-2176512-9 | TE Connectivity
RoHS : Compliant

1 : $215.79

CJP800J10RJ

TE Connectivity

CJP 800W 10R 5% Lead Resistance Value: 10 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Chassis Mount Resistor | 10 Ω Wire Wound 5 % Power Resistor | Part Number: CJP800J10RJ | Internal Number: 2176512-9 | TE Connectivity
RoHS : Compliant

1 : $215.79

Teledyne HiRel

5962-9218001M2A

Teledyne HiRel

LATCH, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

80019012C

Teledyne HiRel

AND GATE, QUAD 2-INPUT, WITH OPEN-COLLECTOR OUTPUTS

8000304XA

Teledyne HiRel

MICROPROCESSOR, 16-BIT, 10 MHZ

8000302YA

Teledyne HiRel

MICROPROCESSOR, 16-BIT, 4.0 MHZ

5962-9080001MFA

Teledyne HiRel

8000303UA

Teledyne HiRel

MICROPROCESSOR, 16-BIT, 6.0 MHZ

8000303XA

Teledyne HiRel

MICROPROCESSOR, 16-BIT, 6.0 MHZ

5962-9758001QFA

Teledyne HiRel

FLIP-FLOP, JK, DUAL
RoHS : Not Compliant

8000304UA

Teledyne HiRel

MICROPROCESSOR, 16-BIT, 10 MHZ

5962-9758001QEA

Teledyne HiRel

FLIP-FLOP, JK, DUAL
RoHS : Not Compliant

8000302QA

Teledyne HiRel

MICROPROCESSOR, 16-BIT, 4.0 MHZ

5962-9218001MRA

Teledyne HiRel

LATCH, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

8000305QA

Teledyne HiRel

MICROPROCESSOR, 16-BIT, 10 MHZ

8000305YC

Teledyne HiRel

MICROPROCESSOR, 16-BIT, 10 MHZ, GOLD LEAD FINISH

5962-9758001Q2A

Teledyne HiRel

FLIP-FLOP, JK, DUAL
RoHS : Not Compliant

Venkel Ltd.

MELFC0102-UZ-2800BT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/5W;�15PPM;280R;�0.1%
RoHS : Compliant

MELFC0204-TN-6800BT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�10PPM;680R;�0.1%
RoHS : Compliant

MELFC0204-TP-1800CT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�5PPM;180R;�0.25%
RoHS : Compliant

MELFC0207-VK-2800FT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�100PPM;280R;�1%
RoHS : Compliant

MELFC0207-XE-2800FT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�25PPM;280R;�1%
RoHS : Compliant

CR1206-8W-6800DT

VENKEL LTD

Chip Resistor;1206;1/8W;680R;�0.5%
RoHS : Compliant

CRG0603-Q-1800FT

VENKEL LTD

RoHS 10/10 Green CR;0603;1/10W;180R;�1%
RoHS : Compliant

HPTF0603-QN-2800AT

VENKEL LTD

High Power Thin Film CR;0603;1/10W;�10PPM;280R;�0.05%
RoHS : Compliant

HPTF0603-SE-6800FT

VENKEL LTD

High Power Thin Film CR;0603;1/6W;�25PPM;680R;�1%
RoHS : Compliant

HPTF0805-RC-6800AT

VENKEL LTD

High Power Thin Film CR;0805;1/8W;�50PPM;680R;�0.05%
RoHS : Compliant

HPTF1206-TP-1800AT

VENKEL LTD

High Power Thin Film CR;1206;1/4W;�5PPM;180R;�0.05%
RoHS : Compliant

HPTF1210-UP-2800BT

VENKEL LTD

High Power Thin Film CR;1210;1/3W;�5PPM;280R;�0.1%
RoHS : Compliant

HPTF2010-UP-1800DT

VENKEL LTD

High Power Thin Film CR;2010;1/3W;�5PPM;180R;�0.5%
RoHS : Compliant

HPTF2512-WC-1800FT

VENKEL LTD

High Power Thin Film CR;2512;3/4W;�50PPM;180R;�1%
RoHS : Compliant

HPTF2512-WC-6800AT

VENKEL LTD

High Power Thin Film CR;2512;3/4W;�50PPM;680R;�0.05%
RoHS : Compliant

Win Source Electronics

BTA16-800BWRG

STMicroelectronics

TRIAC ALTERNISTOR 800V TO220AB
RoHS : Compliant

610 : $0.4925
460 : $0.5493
355 : $0.5682
260 : $0.5872
165 : $0.6061
70 : $0.7387

100,000

503480-0800

Molex

RoHS : Compliant

2,455 : $0.1222
1,835 : $0.1363
1,420 : $0.141
1,030 : $0.1457
665 : $0.1504
275 : $0.1832

59,633

5034800800

Molex

CONN FFC FPC 8POS 0.5MM R/A
RoHS : Compliant

2,455 : $0.1222
1,835 : $0.1363
1,420 : $0.141
1,030 : $0.1457
665 : $0.1504
275 : $0.1832

59,633

BTA140-800

Nexperia

Triacs

335 : $1.0063
270 : $1.0482
210 : $1.0902
145 : $1.174
95 : $1.216
45 : $1.2998

43,393

DRV8800RTYR

Texas Instruments

Full Bridge Motor Driver 32V 16-Pin WQFN EP T/R / IC MOTOR DRIVER PAR 16QFN
RoHS : Compliant

232 : $1.4502
186 : $1.5091
143 : $1.568
100 : $1.6859
65 : $1.7448
31 : $1.8628

30,000

BTA41-800B

STMicroelectronics

TRIAC 800V 40A TOP3
RoHS : Compliant

125 : $2.4132
93 : $2.6916
72 : $2.7844
53 : $2.8772
34 : $2.97
14 : $3.6197

27,842

DMG4800LSD

Diodes Incorporated

DUAL N-CHANNEL ENHANCEMENT MODE MOSFET

1,085 : $0.2775
870 : $0.2888
670 : $0.3
465 : $0.3226
300 : $0.3339
145 : $0.3564

22,000

NB3W800LMNTWG

onsemi

IC CLOCK ZDB FANOUT BUFFER 48QFN
RoHS : Compliant

75 : $4.5236
60 : $4.7074
46 : $4.8913
32 : $5.2591
21 : $5.443
10 : $5.8107

19,020

F280025PMSR

Texas Instruments

C2000 32-BIT MCU WITH 100-MHZ, F
RoHS : Compliant

138 : $2.1896
103 : $2.4422
80 : $2.5264
58 : $2.6106
38 : $2.6948
16 : $3.2843

18,000

AD8007ARZ

Analog Devices Inc

IC OPAMP CFA 650MHZ 8SOIC
RoHS : Compliant

226 : $1.7236
169 : $1.9225
131 : $1.9888
95 : $2.055
61 : $2.1213
26 : $2.5854

9,000

F280025CPTSR

Texas Instruments

IC MCU 32BIT 128KB FLASH 48LQFP
RoHS : Compliant

78 : $3.8677
58 : $4.314
45 : $4.4627
33 : $4.6115
22 : $4.7603
9 : $5.8015

6,800

BGU8007

Nexperia

The best reception of GNSS signals with the smallest footprint

1,110 : $0.3503
830 : $0.3909
640 : $0.4043
465 : $0.4178
305 : $0.4312
125 : $0.5255

2,448

IS45S16800F-7BLA2-TR

Integrated Silicon Solution Inc

IC DRAM 128MBIT PAR 54TFBGA / SDRAM Memory IC 128Mbit Parallel 143 MHz 5.4 ns 54-TFBGA (8x8)
RoHS : Compliant

31 : $10.8657
24 : $12.1194
18 : $12.5374
13 : $12.9553
9 : $13.3731
4 : $16.2986

1,750

LFCN-800D+

Mini-Circuits

LTCC LOW PASS FILTER, DC - 800 M
RoHS : Compliant

90 : $3.369
67 : $3.7577
52 : $3.8873
38 : $4.0169
25 : $4.1465
10 : $5.0535

1,000

HCPL-7800A-300E

Broadcom Limited

IC OPAMP ISOLATION 100KHZ 8DIPGW
RoHS : Compliant

23 : $13.299
17 : $14.8334
14 : $15.3449
10 : $15.8564
7 : $16.3679
3 : $19.9484

857

800CCNFNNFZCWC sprzedawcę

Link URL