800DCNDNNTZCWC Price, sprzedawcę, Stock

Key Specifications, Connector 1 Series: QMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector 1 Impedance: 50 Ohm, Connector 2 Series: QMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 59.06 inches. QMA Male Right Angle to QMA Male Right Angle Low PIM Cable 150 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly QMA male right angle to QMA male right angle low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The QMA male right angle to QMA male right angle low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components, QMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QMA to QMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle QMA cable connection on one end and right angle QMA cable connection on the other. Our low PIM right angle QMA to right angle QMA cable assemblies have a male gender on end 1 and male on end 2. This QMA to QMA cable is a male to male coax assembly, PE3C8007-150CM, can also be known as a low PIM right angle QMA plug to right angle QMA plug cable assembly and will be shipped same-day as it is purchased. QMA plug to QMA plug cable assembly PE3C8007-150CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible QMA cable assembly is manufactured with right angle QMA to right angle QMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency low PIM QMA right angle male to QMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM QMA right angle plug to QMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QMA to QMA cable assembly for quick shipment worldwide. Variations of QMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QMA male right angle to QMA male right angle low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components.

1 : $90.99
25 : $86.44
50 : $81.89
100 : $78.25

PE3C8007-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: QMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector 1 Impedance: 50 Ohm, Connector 2 Series: QMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. QMA Male Right Angle to QMA Male Right Angle Low PIM Cable 60 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly QMA male right angle to QMA male right angle low PIM cable 60 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The QMA male right angle to QMA male right angle low PIM cable 60 inch length using TFT-5G-402 coax using Times Microwave components, QMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QMA to QMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle QMA cable connection on one end and right angle QMA cable connection on the other. Our low PIM right angle QMA to right angle QMA cable assemblies have a male gender on end 1 and male on end 2. This QMA to QMA cable is a male to male coax assembly, PE3C8007-60, can also be known as a low PIM right angle QMA plug to right angle QMA plug cable assembly and will be shipped same-day as it is purchased. QMA plug to QMA plug cable assembly PE3C8007-60 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible QMA cable assembly is manufactured with right angle QMA to right angle QMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency low PIM QMA right angle male to QMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM QMA right angle plug to QMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QMA to QMA cable assembly for quick shipment worldwide. Variations of QMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QMA male right angle to QMA male right angle low PIM cable 60 inch length using TFT-5G-402 coax using Times Microwave components.

1 : $94.99
25 : $90.24
50 : $85.49
100 : $81.69

PE3C8003-150CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 59.06 inches. NEX10 Male to NEX10 Male Low PIM Cable 150 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly NEX10 male to NEX10 male low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 male low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM NEX10 to NEX10 cable assembly has a male gender on end 1 and a male on end 2. PE3C8003-150CM can also be known as a low PIM NEX10 plug to NEX10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.472-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8003-150CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our NEX10 male to NEX10 male cable has a maximum VSWR of 1.4:1. NEX10 plug to NEX10 plug cable assembly PE3C8003-150CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with silver plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 plug to NEX10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements.

1 : $107.99
25 : $102.59
50 : $97.19
100 : $92.87

PE3C8003-200CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 78.74 inches. NEX10 Male to NEX10 Male Low PIM Cable 200 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly NEX10 male to NEX10 male low PIM cable 200 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 male low PIM cable 200 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM NEX10 to NEX10 cable assembly has a male gender on end 1 and a male on end 2. PE3C8003-200CM can also be known as a low PIM NEX10 plug to NEX10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.472-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8003-200CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our NEX10 male to NEX10 male cable has a maximum VSWR of 1.4:1. NEX10 plug to NEX10 plug cable assembly PE3C8003-200CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with silver plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 plug to NEX10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements.

1 : $115.99
25 : $110.19
50 : $104.39
100 : $99.75

PE8007-P

Pasternack Enterprises

Key Specifications, Type: Biased, Detector Polarity: Positive, Connector In Series: SMA, Connector In Gender: Male, Connector Out Series: SMA, Connector Out Gender: Female, Minimum Frequency: 8 GHz, Maximum Frequency: 16 GHz, Connector In Impedance: 50 Ohm. Biased Detector, SMA, Positive Video Out, 8 GHz to 16 GHz. Pasternack biased detector PE8007-P is part of our extensive in-stock RF, microwave and millimeter wave components available for purchase. This biased detector is manufactured with SMA male to SMA female connectors. Our SMA biased detector has a minimum frequency of 8 GHz and a maximum frequency of 16 GHz. This SMA coaxial RF detector has a maximum input power of 23 dBm and a video capacitance of 10 pF. PE8007-P coaxial SMA detector is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. Our biased detector can be bought and shipped worldwide the same-day as with Pasternack's other in-stock RF parts.

1 : $367.99
5 : $353.27
10 : $338.55

PE71S8006

Pasternack Enterprises

Key Specifications, Connector Series: SMA, Connector Gender: Female, Switch Design: Absorptive, Minimum Frequency: 800 MHz, Maximum Frequency: 3 GHz, Impedance: 50 Ohm, Maximum Input Power: 75 Watts, Maximum Input VSWR: 1.4:1. SPDT PIN Diode Swtich Operating from 800 MHz to 3 GHz up to 75 Watts (+48.75 dBm) and N Type. PE71S8006 PIN diode switch from Pasternack is a Absorptive design. Our RF Absorptive PIN diode switch uses SMA connectors at 50 Ohm. This SMA PIN diode Absorptive switch has a minimum frequency of 800 MHz and a maximum frequency of 3 GHz. The Pasternack PIN diode Absorptive RF switch is rated at a switching speed of ns and a maximum input power of 75 Watts (+48.8 dBm ). Insertion loss maximum of this SMA Absorptive switch is dB with an isolation minimum of dB. Absorptive PIN diode radio frequency switch PE71S8006 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our Absorptive SMA coaxial PIN diode switch can ship worldwide the same day that it is bought as with our other available RF parts.

1 : $3,400.0
5 : $3,264.0
10 : $3,128.0
25 : $2,992.0

PE8009-P

Pasternack Enterprises

Key Specifications, Type: Biased, Detector Polarity: Positive, Connector In Series: SMA, Connector In Gender: Male, Connector Out Series: SMA, Connector Out Gender: Female, Minimum Frequency: 18 GHz, Maximum Frequency: 26 GHz, Connector In Impedance: 50 Ohm. Biased Detector, SMA, Positive Video Out, 18 GHz to 26 GHz. Pasternack biased detector PE8009-P is part of our extensive in-stock RF, microwave and millimeter wave components available for purchase. This biased detector is manufactured with SMA male to SMA female connectors. Our SMA biased detector has a minimum frequency of 18 GHz and a maximum frequency of 26 GHz. This SMA coaxial RF detector has a maximum input power of 23 dBm and a video capacitance of 5 pF. PE8009-P coaxial SMA detector is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. Our biased detector can be bought and shipped worldwide the same-day as with Pasternack's other in-stock RF parts.

1 : $431.99
5 : $414.71
10 : $397.43

PE3W09800

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm. SMA Male to Reverse Polarity SMA Male Cable Using LMR-195-FR Coax. PE3W09800 is a SMA male to reverse polarity SMA male cable using LMR-195-FR coax. This Pasternack SMA male to reverse polarity SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to reverse polarity male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W09800 SMA male to SMA reverse polarity male cable assembly is constructed with LMR-195-FR coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C6800/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male to Plug Cable Using LMR-100 Coax with HeatShrink. PE3C6800/HS is a reverse polarity SMA male to FAKRA plug cable using LMR-100A coax. This Pasternack reverse polarity SMA male to FAKRA plug cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm FAKRA for connector 2. Our reverse polarity male SMA to plug FAKRA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C6800/HS SMA reverse polarity male to FAKRA plug cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W09800/HS-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Plug, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Fire Rated SMA Male to Reverse Polarity SMA Plug Low Loss Cable 60 Inch Length Using LMR-195-FR Coax with HeatShrink., Radio frequency assembly fire rated SMA male to reverse polarity SMA plug low loss cable 60 inch length using LMR-195-FR coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Fire rated SMA male to reverse polarity SMA plug low loss cable 60 inch length using LMR-195-FR coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and reverse polarity SMA cable connection on the other. Our low loss SMA to reverse polarity SMA cable assemblies have a male gender on end 1 and plug on end 2. PE3W09800/HS-60 can also be known as a low loss SMA plug to reverse polarity SMA male cable assembly and will be shipped same-day as it is purchased. SMA plug to reverse polarity SMA male cable assembly PE3W09800/HS-60 is built with LMR-195-FR which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to reverse polarity SMA plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W09800/HS-60 can also be used in the other direction and will be reverse polarity SMA plug to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA reverse polarity male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated SMA male to reverse polarity SMA plug low loss cable 60 inch length using LMR-195-FR coax with heatshrink.

1 : $119.99
25 : $113.99
50 : $107.99
100 : $103.19

PE88D8000

Pasternack Enterprises

1 : $2,990.0
5 : $2,870.4
10 : $2,750.8

PE38005LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG303/U, RF Cable Type: RG303, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Female Bulkhead Cable Using RG303 Coax, RoHS. PE38005LF is a SMA male right angle to SMA female bulkhead cable using RG303 coax. This Pasternack SMA male right angle to SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE38005LF SMA male right angle to SMA female bulkhead cable assembly is constructed with RG303 coax.

PE3W15800

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. N Male to SMA Male Right Angle Cable Using PE-SR405FLJ Coax. PE3W15800 is a N male to SMA male right angle cable using PE-SR405FLJ coax. This Pasternack N male to SMA male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. N to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N to male SMA right angle cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W15800 N male to SMA male right angle cable assembly is constructed with PE-SR405FLJ coax.

PE3C3800

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: Straight Cut Lead, Connector Gender 2: Sexless, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 0, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50. SMP Female to Straight Cut Lead Cable Using RG405 Coax. PE3C3800 is a SMP female to Straight Cut Lead sexless cable using RG405 coax. This Pasternack SMP female to Straight Cut Lead sexless cable assembly uses a 50 Ohm SMP for connector 1 and a Straight Cut Lead for connector 2. Our female SMP to sexless Straight Cut Lead cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3C3800 SMP female to Straight Cut Lead sexless cable assembly is constructed with RG405 coax.

PE38004

Pasternack Enterprises

TE Connectivity

2238007-1

TE Connectivity

TERMINAL, PIN, LANCELESS, 22-26 AWG, EP2 Contact Mating Area Plating Material: Tin (Sn) Contact Type: Pin Wire Contact Termination Area Plating Material: Tin Wire Size: 26 – 22 AWG Operating Voltage: 250 VAC Tin (Sn) Pin 26 – 22 AWG | Connector Contact | Part Number: 2238007-1 | Internal Number: 2238007-1 | TE Connectivity
RoHS : Compliant

1,000 : $0.04
100 : $0.06
10 : $0.07
1 : $0.09

33,910

EC0388-000

TE Connectivity

06151908 Compatible Cable Diameter Range: 2.5 – 4 mm Compatible Cable Diameter Range: .01 – .16 in Primary Product Color: White Marker Style: Push-On Marker Size: 9 Z-Type Push-On Marker | 2.5 – 4 mm .01 – .16" White Push-On | Part Number: EC0388-000 | Internal Number: EC0388-000 | Alias Number: 06151908 | TE Connectivity
RoHS : Compliant

5,000 : $0.05
2,500 : $0.05
1,000 : $0.05
500 : $0.06
250 : $0.06
100 : $0.06
50 : $0.06
25 : $0.06
10 : $0.06
1 : $0.06

6,618

480054-4

TE Connectivity

FF 250 REC HSG 1P NYLON BLACK Terminal Type: Receptacle Number of Positions: 1 Terminal Orientation: Straight Primary Product Color: Black Connector & Housing Type: Receptacle Receptacle 1 Straight Black | Crimp Terminal Housing | Part Number: 480054-4 | Internal Number: 480054-4 | TE Connectivity
RoHS : Compliant

1,000 : $0.26
100 : $0.35
10 : $0.43
1 : $0.55

4,856

280050-7

TE Connectivity

250 FASTON,FLAG,REC.,16-20 AWG,TPPB Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 16 – 20 AWG Wire Size: .5 – 1.5 mm² Mating Tab Width: 6.35 mm Receptacle Uninsulated 16 – 20 AWG .5 – 1.5 mm² | Quick Disconnect | Part Number: 280050-7 | Internal Number: 280050-7 | TE Connectivity
RoHS : Compliant

1,000 : $0.22
100 : $0.3
10 : $0.36
1 : $0.47

2,200

3-2158000-5

TE Connectivity

RZ01-1A4-D005-R Relay & Contactor Type: General Purpose Power Relay Current Type: DC Coil Magnetic System: Monostable Contact Arrangement: 1 Form A SPST-NO Contact Current Rating: 12 A General Purpose Power Relay DC Monostable 1 Form A SPST-NO | PCB Power Relay: 12-16 Amp & Monostable | Part Number: 3-2158000-5 | Internal Number: 3-2158000-5 | Alias Number: RZ01-1A4-D005-R | TE Connectivity
RoHS : Compliant

2,500 : $4.6
1,000 : $4.72
500 : $4.86
250 : $4.98
100 : $5.09
50 : $5.23
25 : $5.35
10 : $5.47
1 : $5.6

1,999

T0931000408-000

TE Connectivity

M4 STAINLESS STEEL SCREW,FLAT HEAD Hdc Bess Stacked Hybrid Connector 120 A | Part Number: T0931000408-000 | Internal Number: T0931000408-000 | TE Connectivity
RoHS : Compliant

1,000 : $0.77
500 : $0.79
250 : $0.81
100 : $0.84
50 : $0.86
25 : $0.88
10 : $0.91
1 : $0.93

1,667

2-2842480-0

TE Connectivity

20P Spring TB Plug w/ Flg 3.5, GN Number of Positions: 20 Terminal Block Connector Type: Plug Connector System: Wire-to-Board Centerline (Pitch): .137 in Centerline (Pitch): 3.5 mm Push-In PCB Terminal Blocks: Time Saving Connector | 20 Plug Wire-to-Board .137" | Part Number: 2-2842480-0 | Internal Number: 2-2842480-0 | .137" | TE Connectivity
RoHS : Compliant

2,500 : $9.52
1,000 : $9.77
500 : $10.03
250 : $10.29
100 : $10.54
50 : $10.8
25 : $11.06
10 : $11.32
1 : $11.57

708

1375800-1

TE Connectivity

ASSY, 120 POS PC104 PLUS Number of Positions: 120 Centerline (Pitch): .079 in Centerline (Pitch): 2 mm Number of Loaded Positions: 120 Contact Current Rating (Max): 3 A Pc/104 Connector | 120 .079" 2 mm | Part Number: 1375800-1 | Internal Number: 1375800-1 | .079" | TE Connectivity
RoHS : Compliant

10,000 : $27.61
5,000 : $28.22
2,500 : $28.84
1,000 : $29.45
500 : $30.06
250 : $30.68
100 : $31.29
50 : $31.9
25 : $32.52
10 : $33.13
1 : $33.75

156

2292800-3

TE Connectivity

AS16,PLUG BACKSHELL KIT,ST,06P,NC12 Number of Positions: 6 Primary Product Color: Black Protection & Strain Relief Accessory Type: Backshell Kit Primary Product Material: PA 66/6 Cable Exit Angle: 180 ° Ampseal 16 Connectors Backshell | 6 Black Backshell Kit PA 66/6 | Part Number: 2292800-3 | Internal Number: 2292800-3 | Alias Number: AS16-ST-60-06-ST-NC12 | TE Connectivity
RoHS : Compliant

1 : $2.19

202K153-100/180-0

TE Connectivity

202K153-100/180-0 Body Orientation: Straight Molded Part Shape Code: 202 Lipped: Yes Material Code: 100 Material Systems Code: 100 Heat Shrink Boot | Straight 202 100 | Part Number: 202K153-100/180-0 | Internal Number: 462867-000 | Alias Number: 4-1193471-8 | TE Connectivity
RoHS : Compliant

1 : $36.94

HD18-003

TE Connectivity

BACK SHELL Number of Positions: 3 Primary Product Color: Gray Protection & Strain Relief Accessory Type: Backshell Primary Product Material: Plastic Cable Exit Angle: 180 ° Automotive Connector Cap & Cover | 3 Gray Backshell Plastic | Part Number: HD18-003 | Internal Number: HD18-003 | Alias Number: ZPF000000000131682 | TE Connectivity
RoHS : Compliant

1 : $4.05

T2580011154-000

TE Connectivity

PIN-Q1-M Contact Type: Pin Rectangular Connector Insert Type: Insert for Contacts Pole Configuration: 1 Wire Size: 26 – 12 AWG Wire Size: .14 – 4 mm² Pin Insert for Contacts 1 26 – 12 AWG | Hdc Hmn Modular System & Rail Compliant | Part Number: T2580011154-000 | Internal Number: T2580011154-000 | TE Connectivity
RoHS : Compliant

100 : $38.0
50 : $39.81
25 : $41.62
10 : $43.43
1 : $45.24

CJP800J680RJ

TE Connectivity

CJP 800W 680R 5% Lead Resistance Value: 680 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Chassis Mount Resistor | 680 Ω Wire Wound 5 % Power Resistor | Part Number: CJP800J680RJ | Internal Number: 3-2176512-1 | TE Connectivity
RoHS : Compliant

1 : $215.79

CJP800J3R3J

TE Connectivity

CJP 800W 3R3 5% Lead Resistance Value: 3.3 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Chassis Mount Resistor | 3.3 Ω Wire Wound 5 % Power Resistor | Part Number: CJP800J3R3J | Internal Number: 2176512-3 | TE Connectivity
RoHS : Compliant

1 : $215.79

T4161210008-005

TE Connectivity

RPC-M12-MR-8CON-PVC-5.0SH Cable Assembly Type: M12 Pigtail Number of Positions: 8 Cable Assembly Length: 5 m Cable Assembly Length: 16.4 ft M8/M12 Application Type: Sensor/Actuator M12 Pigtail 8 5 m 16.4 ft | M12 A-Code Pigtail & Male & R/a & Single Ended Cable | Part Number: T4161210008-005 | Internal Number: T4161210008-005 | TE Connectivity
RoHS : Compliant

1 : $67.94

Teledyne HiRel

5962-9218001MRA

Teledyne HiRel

LATCH, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

5962-9758001QEA

Teledyne HiRel

FLIP-FLOP, JK, DUAL
RoHS : Not Compliant

8000301UA

Teledyne HiRel

MICROPROCESSOR, 16-BIT, 4.0 MHZ

8001901DA

Teledyne HiRel

AND GATE, QUAD 2-INPUT, WITH OPEN-COLLECTOR OUTPUTS
RoHS : Not Compliant

5962-9080001MFA

Teledyne HiRel

80019012C

Teledyne HiRel

AND GATE, QUAD 2-INPUT, WITH OPEN-COLLECTOR OUTPUTS

8000302QA

Teledyne HiRel

MICROPROCESSOR, 16-BIT, 4.0 MHZ

8000306YA

Teledyne HiRel

MICROPROCESSOR, 16-BIT, 6.0 MHZ

8000305YA

Teledyne HiRel

MICROPROCESSOR, 16-BIT, 10 MHZ

8000303UA

Teledyne HiRel

MICROPROCESSOR, 16-BIT, 6.0 MHZ

8000302YA

Teledyne HiRel

MICROPROCESSOR, 16-BIT, 4.0 MHZ

8000304UA

Teledyne HiRel

MICROPROCESSOR, 16-BIT, 10 MHZ

8000306QA

Teledyne HiRel

MICROPROCESSOR, 16-BIT, 6.0 MHZ

5962-9758001QFA

Teledyne HiRel

FLIP-FLOP, JK, DUAL
RoHS : Not Compliant

5962-9218001M2A

Teledyne HiRel

LATCH, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

Venkel Ltd.

FBC1808-800E

VENKEL LTD

High Current Ferrite Bead;1808;80R
RoHS : Compliant

CR0603-10W-2800DT

VENKEL LTD

Chip Resistor;0603;1/10W;280R;�0.5%
RoHS : Compliant

CR0805-8W-1800FT

VENKEL LTD

Chip Resistor;0805;1/8W;180R;�1%
RoHS : Compliant

CR1210-4W-2800FT

VENKEL LTD

Chip Resistor;1210;1/4W;280R;�1%
RoHS : Compliant

MEHF0204-ZC-1800GT

VENKEL LTD

High Frequency MELF;0204;2/5W;�50PPM;180R�2%
RoHS : Not Compliant

MELFC0102-RE-2800FT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/8W;�25PPM;280R;�1%
RoHS : Compliant

MELFC0204-TE-2800CT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�25PPM;280R;�0.25%
RoHS : Compliant

MELFC0204-TZ-2800DT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�15PPM;280R;�0.5%
RoHS : Compliant

MELFC0204-ZZ-2800BT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�15PPM;280R;�0.1%
RoHS : Compliant

MELFC0207-VC-6800DT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�50PPM;680R;�0.5%
RoHS : Compliant

MELFC0207-VZ-1800FT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�15PPM;180R;�1%
RoHS : Compliant

MELFM0207-VC-2800DT

VENKEL LTD

MELF Molded Thin Film CR;0207;1/2W;�50PPM;280R;�0.5%
RoHS : Not Compliant

HPTF0603-QP-6800UT

VENKEL LTD

High Power Thin Film CR;0603;1/10W;�5PPM;680R;�0.01%
RoHS : Compliant

HPTF0603-SC-2800BT

VENKEL LTD

High Power Thin Film CR;0603;1/6W;�50PPM;280R;�0.1%
RoHS : Compliant

HPTF0805-RN-1800AT

VENKEL LTD

High Power Thin Film CR;0805;1/8W;�10PPM;180R;�0.05%
RoHS : Compliant

Vyrian

800-80-006-20-001101

PRECI-DIP SSA

Board Connector, 6 Contact(s), 1 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Black Insulator
RoHS : Compliant

15,741

800-80-039-30-001101

PRECI-DIP SSA

Board Connector, 39 Contact(s), 1 Row(s), Male, Straight, 0.1 inch Pitch, Surface Mount Terminal, Locking, Black Insulator
RoHS : Compliant

15,376

800-80-010-20-001101

PRECI-DIP SSA

Board Connector, 10 Contact(s), 1 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Black Insulator
RoHS : Compliant

12,982

800-80-028-66-001101

PRECI-DIP SSA

Board Connector, 28 Contact(s), 1 Row(s), Male, Straight, 0.1 inch Pitch, Press Fit Terminal, Black Insulator
RoHS : Compliant

12,371

800-80-053-65-001101

PRECI-DIP SSA

Board Connector, 53 Contact(s), 1 Row(s), Male, Straight, 0.1 inch Pitch, Press Fit Terminal, Locking, Black Insulator
RoHS : Compliant

11,885

800-80-054-20-004101

PRECI-DIP SSA

Board Connector, 54 Contact(s), 1 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Black Insulator
RoHS : Compliant

8,599

VV-800-EAE-KAAN-74M17458000_SNPB

Microchip Technology Inc

CMOS Output Clock Oscillator, 74.17458MHz Nom
RoHS : Not Compliant

5,956

SG-8002CA48.0000M-PCCL3

Seiko Epson Corporation

CMOS Output Clock Oscillator, 48MHz Nom
RoHS : Compliant

723

0297-0-15-80-06-80-04-0

Mill-max Mfg

PCB Terminal

700

SG-8002CA48.0000M-PHCL3

Seiko Epson Corporation

CMOS Output Clock Oscillator, 48MHz Nom
RoHS : Compliant

568

SIT8008BI-13-33E-80.000000D

SiTime Corporation

LVCMOS Output Clock Oscillator, 80MHz Nom
RoHS : Compliant

550

SIT8008BI-13-33E-8.000000E

SiTime Corporation

LVCMOS Output Clock Oscillator, 8MHz Nom
RoHS : Compliant

549

SG-8002CA8.0000M-SHML3

Seiko Epson Corporation

CMOS Output Clock Oscillator, 8MHz Nom
RoHS : Compliant

447

SIT8008BI-13-33E-8.000000D

SiTime Corporation

LVCMOS Output Clock Oscillator, 8MHz Nom
RoHS : Compliant

344

SG-8002CA48.0000M-PHCB

Seiko Epson Corporation

CMOS Output Clock Oscillator, 48MHz Nom
RoHS : Compliant

191

Waytek, Inc.

19038-0013

Molex

16-14 GA .180 Female Bullet Connector Blue Nylon Insulation
RoHS : Compliant

50 : $0.1901
200 : $0.1728
500 : $0.1673
1,000 : $0.1604
5,000 : $0.1531

25,617

35138800

Aptiv PLC

Aptiv OCS 1.5 Series Female Terminal 20-22 Ga, Reel (2,800 pcs = 1 Reel)

2,800 : $0.0358
14,000 : $0.0348

16,800

35138800

Aptiv PLC

Aptiv OCS 1.5 Series Female Termianl 20-22 Ga, Loose

100 : $0.1223
200 : $0.0944
500 : $0.0864
1,000 : $0.0793
5,000 : $0.0731

3,800

380-08810

Carling Technologies

Dress Knurled Nickel Face Nut 15/32" for Toggle Switches

10 : $1.5481
50 : $1.3781
100 : $1.249
200 : $1.208
500 : $1.1669
1,000 : $1.126

806

8006K46N1V2

Eaton Electronics

Eaton 8006K46N1V2 Euro SR rocker switch is a sealed, non-illuminated DPDT switch with On-None-On action. It uses snap-in mounting, 0.250" spade terminals, a black two-face rocker, and ratings of 15A at 125VAC, 10A at 250VAC, and 15A at 28VDC.

1 : $15.92
10 : $14.21
50 : $13.03
100 : $12.64
200 : $12.25
500 : $11.86

170

ANN-800

Eaton Electronics

800A Limiter ANN Fast Acting Fuse

1 : $55.05
5 : $49.41
10 : $45.8
50 : $43.32
100 : $40.84
200 : $38.58

158

1800-E1-1-2E-0300-12

30A Circuit Breaker 32V ABYC UL Panel Mount Manual Reset UL 1500 SAE J1428 120VAC

1 : $20.49
5 : $18.3
10 : $17.11
50 : $16.2
100 : $15.37
200 : $14.64

1800-E1-1-2E-0100-12

10A Circuit Breaker 32V ABYC UL Panel Mount Manual Reset UL 1500 SAE J1428 120VAC

1 : $20.49
5 : $18.3
10 : $17.11
50 : $16.2
100 : $15.37
200 : $14.64

880094

Littelfuse Inc

PDM Power Dist Mod W/O Bat Main (Vendor DISCO'd)

1 : $164.83
5 : $157.91
10 : $151.87
25 : $142.39

12-110-1800M

Eaton Electronics

1800W True Sine Inverter UL 458 CSA C22.2

1 : $823.06
5 : $808.61
10 : $795.3

8006K52N1V2

Eaton Electronics

The Eaton 8006K52N1V2 EURO-SR rocker switch is a DPDT (double-pole, double-throw) 3-position switch with momentary (ON)-OFF-(ON) functionality, designed for reliable circuit control in automotive and industrial applications. Rated up to 15A at 125VAC / 28VDC, it features quick-connect 0.250" blade terminals, snap-in panel mounting, and a sealed design to resist moisture, dust, and vibration in harsh environments.

1 : $12.79
10 : $12.31
50 : $11.91
100 : $11.27
200 : $10.87
500 : $10.55

1800-E1-1-2E-0150-12

15A Circuit Breaker 32V ABYC UL Panel Mount Manual Reset UL 1500 SAE J1428 120VAC

1 : $20.49
5 : $18.3
10 : $17.11
50 : $16.2
100 : $15.37
200 : $14.64

880076

Littelfuse Inc

Littelfuse 880076-SL PDM Fuse Block with Control Knob Switch (Supplier DISCO)

1 : $258.8
5 : $248.48
10 : $238.19
25 : $224.02

880075

Littelfuse Inc

SL Series 300A 12V Power Distribution Module w/Bi-Stable Switching Relay

1 : $237.92
5 : $228.44
10 : $218.98
25 : $205.96

19M-P10-B-080-02

80A Series 19 Circuit Breaker Type 3 Manual Reset Button Sensata Klixon SDLM-80

1 : $37.19
5 : $33.61
10 : $31.66
50 : $30.05
100 : $28.74
200 : $27.45

Win Source Electronics

503480-0800

Molex

RoHS : Compliant

2,455 : $0.1222
1,835 : $0.1363
1,420 : $0.141
1,030 : $0.1457
665 : $0.1504
275 : $0.1832

59,633

5034800800

Molex

CONN FFC FPC 8POS 0.5MM R/A
RoHS : Compliant

2,455 : $0.1222
1,835 : $0.1363
1,420 : $0.141
1,030 : $0.1457
665 : $0.1504
275 : $0.1832

59,633

0468001.NRHF

Littelfuse Inc

FUSE BOARD MNT 1A 63VAC/VDC 1206
RoHS : Compliant

5,990 : $0.0501
4,475 : $0.0559
3,465 : $0.0578
2,515 : $0.0597
1,625 : $0.0616
670 : $0.0751

55,000

SLDA31-2R800G-S1TF

Sunlord

RF ANT 2.8GHZ CHIP SOLDER SMD
RoHS : Compliant

1,990 : $0.1953
1,480 : $0.2186
1,150 : $0.2251
835 : $0.2328
540 : $0.2406
225 : $0.2923

52,364

0502128000

Molex

CONN SOCKET 24-30AWG CRIMP TIN
RoHS : Compliant

1,570 : $0.2141
1,175 : $0.2388
910 : $0.2471
660 : $0.2552
425 : $0.2635
175 : $0.3211

41,240

F280041PMS

Texas Instruments

IC MCU 32BIT 128KB FLASH 64LQFP / C28x series Microcontroller IC 32-Bit Single-Core 100MHz 128KB (128K x 8) FLASH 64-LQFP (10x10)
RoHS : Compliant

137 : $2.4674
110 : $2.5677
84 : $2.668
59 : $2.8685
38 : $2.9689
18 : $3.1695

9,000

DS2482S-800+T&R

Maxim Integrated Products

IC MASTER I2C-1WIRE 8CH 16-SOIC
RoHS : Compliant

13 : $24.5423
10 : $27.3741
8 : $28.318
6 : $29.262
4 : $30.2059
2 : $36.8134

7,400

MMICT5838-00-012

TDK Invensense

MIC MEMS DIGITAL PDM OMNI -41DB

186 : $1.8129
139 : $2.0222
108 : $2.0918
78 : $2.1616
51 : $2.2313
21 : $2.7194

5,000

AEAT-8800-Q24TR

Broadcom Limited

PROG 16BITS MAGNETIC ENCODER QFN / Rotary Encoder Magnetic 4096 SSI Vertical
RoHS : Compliant

39 : $7.7914
29 : $8.6905
23 : $8.9901
17 : $9.2898
11 : $9.5895
5 : $11.6871

2,926

BTA420Y-800CT

WeEn Semiconductor Co Ltd

Triacs BTA420Y-800CT/SIL3P/STANDARD M
RoHS : Compliant

153 : $1.9697
114 : $2.197
88 : $2.2728
64 : $2.3485
42 : $2.4243
17 : $2.9546

1,000

CY7C68001-56PVXCT

Cypress Semiconductor

IC USB INTERFACE SX2 56-SSOP / Full Speed/High Speed USB Interface Device USB 2.0 3.3V T/R 56-Pin SSOP
RoHS : Compliant

6 : $65.1941
4 : $72.7164
3 : $75.2239
2 : $77.7314
1 : $80.2388

930

CY7C68001-56LFXC

Cypress Semiconductor

IC USB INTERFACE SX2 56VQFN
RoHS : Compliant

31 : $9.8485
23 : $10.9849
18 : $11.3637
13 : $11.7425
9 : $12.1213
4 : $14.7728

608

LTM8002HY-3.3#PBF

Analog Devices Inc

DC DC CONVERTER 3.3V / Non-Isolated PoL Module, Digital DC DC Converter 1 Output 3.3V 2.5A 3.4V - 40V Input
RoHS : Compliant

11 : $30.8419
9 : $32.0956
7 : $33.3493
5 : $35.8568
4 : $37.1105
2 : $39.618

460

LTM8003HY

Analog Devices Inc

DC DC CONVERTER 0.97-18V
RoHS : Not Compliant

8 : $39.394
6 : $43.9394
5 : $45.4546
4 : $46.9697
3 : $48.4849
1 : $59.091

449

XPC7451RX800PER2

Freescale Semiconductor

4 : $87.579
3 : $97.6843
2 : $101.0527
1 : $104.4211

300

Wuhan P&S

10098678-002C-TRLF

Amphenol FCi

SAS:29 Position Right Angle SM Plug
RoHS : Compliant

1 : $2.0
100 : $1.93
500 : $1.88
1,000 : $1.85

600

800DCNDNNTZCWC sprzedawcę

Link URL