 |
Zakładka z wyszukiwarką danych komponentów |
|
|
Zakładka z wyszukiwarką danych komponentów |
|
E75XPX-R sprzedawcę |
| sprzedawcę | Numer części | Producent | Szczegółowy opis | Price | Qty. BuyNow | |
 Avnet Americas | M55342K06B4E75RS2 | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 150 mW, 0805 [2012 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: M55342K06B4E75RS2) RoHS : Not Compliant |
| 26,000 | |
| D55342K07B4E75RS2 | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 250 mW, 1206 [3216 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: D55342K07B4E75RS2) RoHS : Not Compliant |
| 10,000 | ||
| M55342K11B4E75RS2 | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 50 mW, 0402 [1005 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: M55342K11B4E75RS2) RoHS : Not Compliant |
| 7,500 | ||
| M55342K06B4E75RS3 | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 150 mW, 0805 [2012 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: M55342K06B4E75RS3) RoHS : Not Compliant |
| 5,000 | ||
| P6KE7.5CA-E3/54 | Vishay Intertechnologies | Diode TVS Single Bi-Dir 6.4V 600W 2-Pin DO-15 T/R - Tape and Reel (Alt: P6KE7.5CA-E3/54) RoHS : Compliant |
| 4,000 | ||
| M55342K12B4E75RS2 | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 100 mW, 0603 [1608 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: M55342K12B4E75RS2) RoHS : Not Compliant |
| 3,500 | ||
| 1.5KE7.5A-E3/54 | Vishay Intertechnologies | 1.5KW,7.5V 5%,UNIDIR,AXIAL TVS - Tape and Reel (Alt: 1.5KE7.5A-E3/54) RoHS : Compliant |
| 2,800 | ||
| M55342K06B4E75RS6 | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 150 mW, 0805 [2012 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: M55342K06B4E75RS6) RoHS : Not Compliant |
| 2,100 | ||
| PAT0603E7502BST1 | Vishay Intertechnologies | SMD Chip Resistor, 75 kohm, ? 0.1%, 150 mW, 0603 [1608 Metric], Thin Film, Precision, PAT Series - Tape and Reel (Alt: PAT0603E7502BST1) RoHS : Compliant |
| 2,000 | ||
| PTN0805E7500BST1 | Vishay Intertechnologies | SMD Chip Resistor, 750 ohm, ? 0.1%, 200 mW, 0805 [2012 Metric], Thin Film, Precision, PTN Series - Tape and Reel (Alt: PTN0805E7500BST1) RoHS : Compliant |
| 1,000 | ||
| PTN0805E7502BBT1 | Vishay Intertechnologies | SMD Chip Resistor, 75 kohm, ? 0.1%, 200 mW, 0805 [2012 Metric], Thin Film, Precision, PTN Series - Tape and Reel (Alt: PTN0805E7502BBT1) RoHS : Not Compliant |
| 1,000 | ||
| D55342K07B4E75RS3 | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 250 mW, 1206 [3216 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: D55342K07B4E75RS3) RoHS : Not Compliant |
| 1,000 | ||
| RV0805E7501DBT | Vishay Intertechnologies | SMD Chip Resistor, 7.5 kOhm, ? 0.5%, 200 mW, 0805 [2012 Metric], Thin Film, High Precision - Custom Tape W/Leader (Alt: RV0805E7501DBT) RoHS : Not Compliant |
| 518 | ||
| M55342K06B4E75RWB | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 150 mW, 0805 [2012 Metric], Thin Film, Established Reliability - Waffle Pack (Alt: M55342K06B4E75RWB) RoHS : Not Compliant |
| 400 | ||
| RE75G24R9C02 | Vishay Intertechnologies | Resistor, 24.9 Ohm, ? 1%, 30 W, Wirewound, Military Reliability, Solder Lug - Bulk (Alt: RE75G24R9C02) RoHS : Not Compliant |
| 9 | ||
 Newark | T495B106K025ATE750 | KEMET Corporation | Surface Mount Tantalum Capacitor, T495 S; |Kemet T495B106K025ATE750 RoHS : Compliant |
| 39,351 | |
| T495B106K025ATE750 | KEMET Corporation | Cap, 10µf, 25V, 10%; |Kemet T495B106K025ATE750 RoHS : Compliant |
| 32,000 | ||
P6KE75A | Littelfuse Inc | Tvs - Diode, 5 W, 103V, Unidirectional,; |Littelfuse P6KE75A RoHS : Compliant |
| 2,345 | ||
| T495B106K010ATE750 | KEMET Corporation | Cap, Tantalum, 10Uf, 10V, 1411; |Kemet T495B106K010ATE750 RoHS : Compliant |
| 2,000 | ||
| 1.5KE75CA | Littelfuse Inc | Tvs Diode, 1.5Kw, 75V, Do-201; Product R |Littelfuse 1.5KE75CA RoHS : Compliant |
| 907 | ||
| PCAN1206E75R0BST3 | Vishay Intertechnologies | Chip Res Smd, 75R, ±0.1%, 2W; |Vishay PCAN1206E75R0BST3 RoHS : Compliant |
| 815 | ||
| PCAN1206E75R0BST3 | Vishay Intertechnologies | Chip Res Smd, 75R, ±0.1%, 2W; |Vishay PCAN1206E75R0BST3 RoHS : Compliant |
| 815 | ||
| RN73C1E75RBTD | TE Connectivity | Res, 75R, 0.1%, 0.063W, 0402, Thin Film; |Te Connectivity Holsworthy RN73C1E75RBTD RoHS : Compliant |
| 680 | ||
| RN73C1E75RBTD | TE Connectivity | Res, 75R, 0.1%, 0.063W, 0402, Thin Film; |Te Connectivity Holsworthy RN73C1E75RBTD RoHS : Compliant |
| 680 | ||
| RP73PF1E75RBTDF | TE Connectivity | Chip Res Smd, 75R, ±0.1%, 100Mw; |Te Connectivity Cgs RP73PF1E75RBTDF RoHS : Compliant |
| 610 | ||
| RP73PF1E75RBTDF | TE Connectivity | Chip Res Smd, 75R, ±0.1%, 100Mw; |Te Connectivity Cgs RP73PF1E75RBTDF RoHS : Compliant |
| 610 | ||
| PTE7500-41AG-1A400 | Sensata Technologies | Pressure Transmitter, Gauge, 0-400Bar; |Sensata PTE7500-41AG-1A400 RoHS : Compliant |
| 24 | ||
| FE 75 SET | Weller Hand Tools GmbH | Soldering Iron, Fume Ext, 80W, 24V; |Weller (Apex Tool Group) FE 75 SET (Alternate Part Number: 037103282286 RoHS : Compliant |
| 5 | ||
| SE75P-CR0 | Panduit Corp | Sleeving, Expandable, 19.1Mm, Black, 100; |Panduit SE75P-CR0 (Alternate Part Number: 07498320239 RoHS : Compliant |
| 2 | ||
| E75 | Thomas & Betts | Nonins Bs Rng Term No6 Awg 1/2 Bolt |Abb Thomas & Betts E75 RoHS : Not Compliant |
| 0 | ||
 RS | BNE75W | IDEC Corporation | BN SERIES END PLATE RoHS : Compliant |
| 249 | |
| SMT-8M-A-PO-24V-E-7,5-OE (574340) | Festo | PROXIMITY SENSOR, SMT-8M-A-PO-24V-E-7, 5-OE |
| 30 | ||
| XCSE7511 | Telemechanique Sensors | SOLENOID LOCKING INTERLOCK SWITCH, KEY/TONGUE, 2NC 1NO, 6A, 24V, XCS SERIES |
| 12 | ||
| XCSTE7512 | Telemechanique Sensors | SAFETY INTERLOCK 240VAC 5AMP T-XCS+O |
| 5 | ||
| THINWIRE-7.5M | Stadium Group PLC | CABLE ASSEMBLIES - HDMI TO HDMI |
| 5 | ||
| EA5E750Q (75427) | Banner Engineering Corp | EMITTER, 750MM, RANGE 0.4-4M, 5MM RESOLUTION, 12-30VDC, QD, EZ-ARRAY SERIES |
| 5 | ||
| XCSE7533 | Telemechanique Sensors | METAL SAFETY SWITCH XCSE, 2NC+1NO-SLOW BREAK- 2ENTRIES TAPPED 1/2" NPT-110/120V |
| 3 | ||
| SE75P-CR0 | Panduit Corp | BRAIDED EXPANDABLE SLEEVING, 0.75"DIA., BLACK, POLYETHYLENE, 100 REEL RoHS : Compliant |
| 3 | ||
| XCSE7512 | Telemechanique Sensors | XCS-E SOLENOID INTERLOCK SWITCH POWER TO LOCK 24 V AC/DC |
| 2 | ||
| 24032 CCK30/C3FVE753 | SKF | SPHERICAL ROLLER BEARING, LARGE SIZE |
| 2 | ||
| 3125E-75 | American Beauty Tools | HEAVY-DUTY SOLDERING IRON,75 W,1/4 IN. SHANK, RIGHT ANGLE FOR ERGONOMIC COMFORT |
| 1 | ||
| FLUKE-753 (3977641) | Fluke Calibration | MULTI-FUNCTION, DOCUMENTING PROCESS CALIBRATOR, 300V, 110MA, IP-52, 750 SERIES |
| 1 | ||
| FLUKE-750P27 (4352351) | Fluke Calibration | PRESSURE MODULE, 0 TO 300 (0 TO 20 BAR), (0 TO 2000 KPA) |
| 1 | ||
| FLUKE-750P07 (4352360) | Fluke Calibration | PRESSURE MODULE, 0 TO 500 (0 TO 35 BAR), (0 TO 3500 KPA) |
| 1 | ||
| E75 | STA-KON | NON-INSULATED LARGE BRAZED SEAM RING TERMINAL, 1.49"L X .82"W, BOLT 1/2", #6 |
| 0 | ||
 Microchip Technology Inc | AT30TSE752A-XM8M-T | Microchip Technology Inc | 1.7-5.5V, 1MHz, Ind High Tmp, 8-MSOP, MSOP, Projected EOL: 2041-03-23 RoHS : Compliant |
| 43,343 | |
AT30TSE758A-SS8M-T | Microchip Technology Inc | 1.7-5.5V, 1MHz, Ind High Tmp, 8-SOIC-N, SOIC, Projected EOL: 2041-06-04 RoHS : Compliant |
| 4,000 | ||
| AT30TSE758A-XM8M-T | Microchip Technology Inc | 1.7-5.5V, 1MHz, Ind High Tmp, 8-MSOP, MSOP, Projected EOL: 2040-12-10 RoHS : Compliant |
| 3,145 | ||
| AT30TSE752A-SS8M-T | Microchip Technology Inc | 1.7-5.5V, 1MHz, Ind High Tmp, 8-SOIC-N, SOIC, Projected EOL: 2041-03-24 RoHS : Compliant |
| 1,055 | ||
| AT30TSE758A-SS8M-B | Microchip Technology Inc | 1.7-5.5V, 1MHz, Ind High Tmp, 8-SOIC-N, SOIC, Projected EOL: 2041-04-18 RoHS : Compliant |
| 1,045 | ||
| MSMCJLCE75A | Microchip Technology Inc | Uni-Directional TVS _ SMCJ (DO-214AB), Projected EOL: 2049-02-05 RoHS : Compliant |
| 538 | ||
| AT30TSE752A-XM8M-B | Microchip Technology Inc | 1.7-5.5V, 1MHz, Ind High Tmp, 8-MSOP, MSOP, Projected EOL: 2040-12-01 RoHS : Compliant |
| 178 | ||
| AT30TSE754A-SS8M-B | Microchip Technology Inc | 1.7-5.5V, 1MHz, Ind High Tmp, 8-SOIC-N, SOIC, Projected EOL: 2045-12-22 RoHS : Compliant |
| 50 | ||
| MP6KE75A | Microchip Technology Inc | Uni-Directional TVS _ T-18, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| MP6KE75CA | Microchip Technology Inc | Bi-Directional TVS _ T-18, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| MAP4KE75AE3 | Microchip Technology Inc | Uni-Directional TVS _ DO-41P, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| MP6KE7.5CAE3 | Microchip Technology Inc | Bi-Directional TVS _ T-18, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| MP4KE7.5CAE3 | Microchip Technology Inc | Bi-Directional TVS _ DO-41P, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| M1.5KE7.5CAE3 | Microchip Technology Inc | Bi-Directional TVS _ CASE 1, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| MXLSMCGLCE75AE3 | Microchip Technology Inc | Uni-Directional TVS _ SMCG (DO-215AB), Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
 Bisco Industries | YKFAE-75416-GA | PennEngineering (PEM) | 4,668 | |||
| FRBHE-7500-12-B-4 | Howmet Aerospace | 150 | ||||
| E-750 | Bivar Inc | 102 | ||||
| SE-75 | MISC. EYELETS | 45 | ||||
| SE75PFR-CR0 | Panduit Corp | RoHS : Compliant | 1 | |||
| IHLE-750-016-3-500-00-00 | Groov-Pin Corporation | 1 | ||||
| SE75PFR-DR0 | Panduit Corp | 1 | ||||
 Rochester Electronics | 1.5KE7.5CA | onsemi | Trans Voltage Suppressor Diode, 1500W, 6.4V V(RWM), Bidirectional, 1 Element, Silicon RoHS : Compliant |
| 150 | |
| TLE75080ESDXUMA1 | Infineon Technologies AG | Power Distribution Switch Relay, Solenoid Driver N-Channel 8 OUT High Side 24-SOP T/R RoHS : Compliant |
| 35,223 | ||
| TLE75080ESHXUMA1 | Infineon Technologies AG | Buffer/Inverter Based Peripheral Driver RoHS : Compliant |
| 8,070 | ||
| TLE75620ESTXUMA1 | Infineon Technologies AG | Buffer/Inverter Based Peripheral Driver RoHS : Compliant |
| 9,192 | ||
ADE7566ASTZF16-RL | Analog Devices Inc | Analog Circuit, 1 Func RoHS : Compliant |
| 9,419 | ||
| ADE7566ASTZF16 | Analog Devices Inc | Analog Circuit, 1 Func RoHS : Compliant |
| 2,423 | ||
| ADE7569ASTZF16 | Analog Devices Inc | Analog Circuit, 1 Func RoHS : Compliant |
| 2,529 | ||
| AT30TSE752-XM8-B | Atmel Corporation | Serial Switch/Digital Sensor, 12 Bit(s), 3Cel, Square, 8 Pin, Surface Mount RoHS : Compliant |
| 24,452 | ||
| AT30TSE754-XM8-B | Atmel Corporation | Serial Switch/Digital Sensor, 12 Bit(s), 3Cel, Square, 8 Pin, Surface Mount RoHS : Compliant |
| 15,479 | ||
| AT30TSE758-XM8-B | Atmel Corporation | Serial Switch/Digital Sensor, 12 Bit(s), 3Cel, Square, 8 Pin, Surface Mount RoHS : Compliant |
| 21,500 | ||
1V5KE75CA | Fairchild Semiconductor Corporation | Trans Voltage Suppressor Diode, 1500W, 64.1V V(RWM), Bidirectional, 1 Element, Silicon, DO-201AE RoHS : Not Compliant |
| 304 | ||
| P6KE75A | Fairchild Semiconductor Corporation | Trans Voltage Suppressor Diode, 600W, 64.1V V(RWM), Unidirectional, 1 Element, Silicon RoHS : Not Compliant |
| 2,100 | ||
| RGE7501MC | Intel Corporation | Intel E7501 Chipset Memory Controller Hub (MCH) |
| 2,024 | ||
SIT1602AC-12-18E-75.000000G | SiTime Corporation | CRYSTAL OSC XO (Standard) HCMOS, LVCMOS 75MHz 1.62V ~ 1.98V ±25ppm 4-SMD T/R RoHS : Compliant |
| 250 | ||
| SIT8103AC-82-18E-75.00000T | SiTime Corporation | CRYSTAL OSC XO (Standard) LVCMOS, LVTTL 75MHz 1.71V ~ 1.89V ±25ppm 4-SMD T/R RoHS : Compliant |
| 1,340 | ||
 Sager | E75 | ABB Group | Fixed Terminal Blocks |
| 0 | |
| AAE7545-00 | TE Connectivity | TE Connectivity BTA1-10-06-4-J-CV4018 | 0 | |||
| FFA.1E.750.CNS | LEMO connectors | Circular Push Pull Connectors STRAIGHT PLUG CABLE COLLET | 0 | |||
| FFA.2E.755.CNS | LEMO connectors | Circular Push Pull Connectors STRAIGHT PLUG CABLE COLLET | 0 | |||
| 4120-G111-K1M1-A1S0ZE-7.5A | E-T-A | Circuit Breakers Single pole, miniaturised thermal circuit breaker with trip-free mechanism and push/pull on/off manual actuation (M-type TO CBE to EN 60934). Threadneck panel mounted, temperature-compensated, with optional auxiliary contacts. Fully appr | 0 | |||
| FFA.2E.750.CNS | LEMO connectors | Circular Push Pull Connectors STRAIGHT PLUG CABLE COLLET | 0 | |||
| FFA.3E.755.CNS | LEMO connectors | Circular Push Pull Connectors STRAIGHT PLUG CABLE COLLET |
| 0 | ||
ATS-01E-75-C1-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,NO TIM RoHS : Compliant |
| 0 | ||
| VC5E750 | Honeywell Sensing and Control / Clarostat | Wirewound Resistors - Through Hole VC Series, 750 Ohms, 5.0 W, Fixed, Wirewound Resistor | 0 | |||
| PRQE75W-E12-S28-D | Bel Fuse | Isolated DC/DC Converters - Through Hole dc-dc isolated, 75 W, 9-75 Vdc input, 28 Vdc, 2.67 A, single regulated output, DIP RoHS : Compliant |
| 0 | ||
| V10E75AUTO | Littelfuse Inc | RADIAL VARISTOR 10MM ROHS/LEAD FREE |
| 0 | ||
| V20E750P | Littelfuse Inc | RADIAL VARISTOR 20MM ROHS / LEAD FREE |
| 0 | ||
| PRQE75W-E12-S15N-D | Bel Fuse | Isolated DC/DC Converters - Through Hole dc-dc isolated, 75 W, 9-75 Vdc input, 15 Vdc, 5 A, neg logic, single regulated output, DIP RoHS : Compliant |
| 0 | ||
| E75-30LD | Cherry Industrial Solutions | Pushbutton Switches | 0 | |||
| E75793-000 | TE Connectivity | Circular MIL Spec Backshells TXR40AU00-1210BI RoHS : Compliant |
| 0 | ||
 TME | E752NEO | Eclipse Magnetics | Magnet: permanent; NdFeB; 44N; Ø: 10mm; H: 20mm; brass; bipolar; NEO |
| 174 | |
| VUE75-06NO7 | IXYS Corporation | Bridge rectifier: three-phase; Urmax: 600V; If: 86A; Ifsm: 215A RoHS : Compliant |
| 24 | ||
| TASMA 331E 75MM/45,7M | Scapa | Tape: duct; W: 75mm; L: 45.7m; Thk: 0.65mm; acrylic; -20÷110°C; 2.5% |
| 2 | ||
| 1.5KE75CA TR | Fagor Electrónica | Diode: TVS; 75V; bidirectional; DO201AE; 1.5kW; 1.5KE; reel |
| 0 | ||
| 1.5KE7.5CA_R2_00001 | PanJit Semiconductor | Diode: TVS; 7.13÷7.88V; 132A; bidirectional; DO201AE; 1.5kW; 1.5KE RoHS : Compliant |
| 0 | ||
| CRT02J7E7504 | Viking Technology | Resistor: thick film; 7.5MΩ; 0402; 62.5mW; ±5%; CRT; -55÷155°C; 1A |
| 0 | ||
| T22CT 2AE75L000000 | LUMEL SA | Transformer: current; Iin: 250A; Iout: 4÷20mA; Øint: 31.5mm; 50÷60Hz |
| 0 | ||
| XL3E-750/1A | TE Connectivity | Transformer: current; Iin: 750A; Iout: 1A; Øint: 28mm; 50÷60Hz |
| 0 | ||
UBY1E752MHL | Nichicon Corporation | Capacitor: electrolytic; low ESR; THT; 7500uF; 25VDC; Ø16x35.5mm RoHS : Compliant |
| 0 | ||
| XL3E-750/5A-0.2 | TE Connectivity | Transformer: current; Iin: 750A; Iout: 5A; 0.2@max10VA; Øint: 28mm |
| 0 | ||
| WK73R2HTTE7500F | KOA Speer Electronics Inc | Resistor: thick film; 750Ω; SMD; 1020; 1W; ±1%; WK73R; 200V RoHS : Compliant |
| 0 | ||
| TLE75242ESDXUMA1 | Infineon Technologies AG | IC: power switch RoHS : Compliant |
| 0 | ||
| WK73R3ATTE7500F | KOA Speer Electronics Inc | Resistor: thick film; 750Ω; SMD; 1225; 2W; ±1%; WK73R; 200V RoHS : Compliant |
| 0 | ||
| WME2E756J000000BR | Sweetary Industrial | Capacitor: polypropylene; 75uF; ±5%; Ø41x60mm; Leads: axial; THT |
| 0 | ||
| XCSE7513 | Telemechanique Sensors | Safety switch: key operated; XCSE; NC x2 + NO; IP67; metal; red |
| 0 | ||
 ComSIT USA | Q120JXE7511250100T1LF | Jauch Quartz America | AVAILABLE EU | 34,109 | ||
| Q300JXE7511250100T3FULF | Jauch Quartz America | AVAILABLE EU | 8,078 | |||
| TLE75004ELD | NXP Semiconductors | AVAILABLE EU | 3,442 | |||
| MMA02040E7500BB300 | Vishay Intertechnologies | AVAILABLE EU RoHS : Compliant | 4,171 | |||
ComSIT USA | SFH206E7504 | Siemens | SILICON-PIN-PHOTODIODE WITH DAYLIGHT FILTER PIN Photodiode RoHS : Not Compliant | 74,000 | ||
| TLE75602EMD | Infineon Technologies AG | SPI DRIVER FOR ENHANCED RELAY CONTROL Buffer/Inverter Based Peripheral Driver RoHS : Compliant | 57,975 | |||
P4KE75A | Littelfuse Inc | TVS Diode Trans Voltage Suppressor Diode, 400W, 64.1V V(RWM), Unidirectional, 1 Element, Silicon, DO-204AL RoHS : Compliant | 40,000 | |||
| P6KE75ARLG | onsemi | 600 WATT PEAK POWER LITTLEFUSE-40 TRANSIENT VOLTAGE SUPPRESSOR Trans Voltage Suppressor Diode, 600W, 64.1V V(RWM), Unidirectional, 1 Element, Silicon RoHS : Compliant | 8,000 | |||
| 15KE75CA | STMicroelectronics | TVS Diode Zener Bi-Directional 75V 134V DO201 T/R RoHS : Compliant | 7,340 | |||
| P6KE75A | Littelfuse Inc | TVS DIODE Trans Voltage Suppressor Diode, 600W, 64.1V V(RWM), Unidirectional, 1 Element, Silicon, DO-204AC RoHS : Compliant | 4,000 | |||
| P6KE75AE354 | Vishay Intertechnologies | TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR Trans Voltage Suppressor Diode, 600W, 64.1V V(RWM), Unidirectional, 1 Element, Silicon, DO-204AC RoHS : Compliant | 3,820 | |||
| P6KE75CAR0 | TSC Electronics Ltd | TRANSIENT VOLTAGE SUPPRESSOR Trans Voltage Suppressor Diode, 600W, 64.1V V(RWM), Bidirectional, 1 Element, Silicon, DO-204AC RoHS : Compliant | 3,000 | |||
| 15KE75AE354 | Vishay Intertechnologies | Trans Voltage Suppressor Diode, 1500W, 6.4V V(RWM), Unidirectional, 1 Element, Silicon RoHS : Compliant | 1,400 | |||
| 15KE75CAR0 | TSC Electronics Ltd | TVS Diode Zener Bi-Directional 71.3V 103V DO201 T/R RoHS : Compliant | 1,250 | |||
| Q160JXE752125050T1LF | Jauch Quartz America | Electronic Component RoHS : Compliant | 1,000 | |||
| Q160JXE7511250100T1LF | Jauch Quartz America | Electronic Component RoHS : Compliant | 1,000 | |||
| UE75A206000T | TE Connectivity | SFP 20 POSITION HIGH SPEED CONNECTOR RECEPTACLE FIXED BOARD, RIGHT ANGLE SMT Telecom and Datacom Connector, 20 Contact(s), Female, Right Angle, Surface Mount Terminal, Receptacle RoHS : Compliant | 500 | |||
| DFN4KB25MXE75 | CTS Corporation | TTL & HCMOS PRECISION OSCILLATOR HCMOS/TTL Output Clock Oscillator, 25MHz Nom RoHS : Compliant | 80 | |||
| F90T12NS1E757A01B1 | Nidec Corporation | Electronic Component RoHS : Not Compliant | 27 | |||
 GLYN GmbH & Co. KG | EP4CE75F23I7N | Altera Corporation | Cyclone-IVE FPGA 484-BGA -40/+85øC RoHS : Compliant | 205 | ||
 Interstate Connecting Components | MWDL-51S-4E7-5B | Glenair Inc | 0 | |||
| MWDM1L-15S-6E7-50B | Glenair Inc | RoHS : Not Compliant | 0 | |||
| MWDM2L-37GS-8E7-5S | Glenair Inc | 0 | ||||
| MWDM1L-100P-8E7-5P | Glenair Inc | RoHS : Not Compliant | 0 | |||
| MWDM1L-15S-0E7-5B | Glenair Inc | 0 | ||||
| MWDM2L-15GP-0E7-5M | Glenair Inc | 0 | ||||
| MS3467E7-50S | TE Connectivity | 0 | ||||
| E75793-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCTXR40AU00-1210BI RoHS : Compliant | 0 | |||
| AAE7541-00 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCBTH1-09-06-4-J | 0 | |||
| D38999/20ME75PN | SOURIAU-SUNBANK | Flanschdose, Gr� e 17 RoHS : Compliant | 0 | |||
| MWDM1L-15S-8E7-5P | Glenair Inc | RoHS : Not Compliant | 0 | |||
| E759443001 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYC55A1131-18-2/4/6-9 RoHS : Compliant | 0 | |||
| MWDL-15P-6E7-5B | Glenair Inc | 0 | ||||
| FRVE75-2VP614-7P-M | ITT Interconnect Solutions | FRVE75-2VP614-7P-M 000416190 | 0 | |||
| 801-077-AMTPE-75 | Glenair Inc | MM 801 CORDSET 75 WITH D/C NI | 0 | |||
 NexGen Digital | RK73B3ATTE753J | KOA Speer Electronics Inc | RoHS : Compliant | 4,000 | ||
 PEI Genesis | FFA.1E.750.CNS | LEMO connectors |
| 0 | ||
| 4120-G111-K1M1-A1S0ZE-7.5A | E-T-A |
| 0 | |||
| UE75A202001T | Amphenol Corporation |
| 0 | |||
| FFA.0E.750.CNS | LEMO connectors |
| 0 | |||
| FFA.1E.755.CNS | LEMO connectors |
| 0 | |||
| J2CE7521-20S0A | ITT Interconnect Solutions |
| 0 | |||
| R58HB45E75A160 | SOURIAU-SUNBANK |
| 0 | |||
| UE75A205000T | Amphenol Corporation |
| 0 | |||
| R58HB18E75A018 | SOURIAU-SUNBANK |
| 0 | |||
| R58HB35E75X036 | SOURIAU-SUNBANK |
| 0 | |||
| UE75-A20-6000T | Amphenol Corporation | RoHS : Compliant |
| 0 | ||
 Powell Electronics | E-750 | Bivar Inc | ECON-O-GIDES, Press-In Card Guide, 7.5 i |
| 12,672 | |
| FFA.2E.755.CNS | LEMO connectors | COLLET 2K DIAM 5.1 - 5 |
| 50 | ||
| FFA.1E.755.CNS | LEMO connectors | COLLET 1K DIAM 5.1 - 5 |
| 31 | ||
| MS3424E7-50S | TE Connectivity | MS3424 MIL-DTL-26482 CONNECTOR |
| 30 | ||
| 195E75 | Hammond Manufacturing | CHOKE RoHS : Compliant |
| 16 | ||
| FFA.1E.750.CNS | LEMO connectors | COLLET 1K DIAM 4.6 - 5 |
| 14 | ||
 PUI | FSE-750MA | 285 | ||||
 Richardson RFPD | 800E751GT2500XJ24 | Kyocera AVX Components | CapCeramic 750pF 2500VC0G 2% Pad SMD 3838 125°C RoHS : Compliant | 0 | ||
| MA1.5KE7.5AE3 | Microchip Technology Inc | TVS Diode Single Uni-Dir 6.4V 1.5KW 2-Pin Case 1 B RoHS : Not Compliant | 0 | |||
| TFSSE750RJE | Ohmite Mfg Co | Thick Film Resistor RoHS : Compliant |
| 0 | ||
| E7507LF | Rakon Limited | OSC TCXO/VCTCXO RoHS : Compliant | 0 | |||
| 100E750GT3600XJ24 | Kyocera AVX Components | 100E750GT3600XJ24 RoHS : Not Compliant | 0 | |||
| 100E750FMN3600X | Kyocera AVX Components | MULTILYRCERAMIC CAP RoHS : Compliant | 0 | |||
| 100E750JW3600XJ24 | Kyocera AVX Components | Cap Ceramic 75pF 3600V +90±30ppm/C 5% Pad SMD 125C RoHS : Not Compliant | 0 | |||
| E7509LF | Rakon Limited | OSC TCXO/VCTCXO RoHS : Compliant | 0 | |||
| 700E750GAR7200X | Kyocera AVX Components | MULTILYRCERAMIC CAP RoHS : Compliant | 0 | |||
| 100E751JMS2500XJ16 | Kyocera AVX Components | Cap Ceramic 750pF 2500V P90 5% Microstrip SMD 3838 RoHS : Compliant | 0 | |||
| 700E750JW7200X | Kyocera AVX Components | MULTILYRCERAMIC CAP RoHS : Not Compliant | 0 | |||
| 800E750GT7200XJ24 | Kyocera AVX Components | 800E750GT7200XJ24 RoHS : Compliant | 0 | |||
| 100E751GW2500XJ24 | Kyocera AVX Components | SMD Chip General RF Ceramic Capacitor RoHS : Compliant | 0 | |||
| 100E751GTN2500X | Kyocera AVX Components | MULTILYRCERAMIC CAP RoHS : Compliant | 0 | |||
| TFSSE750RFE | Ohmite Mfg Co | Thick Film Resistor RoHS : Compliant |
| 0 | ||
 Rutronik | UE75A206000T | Amphenol Communications Solutions | SFP Connector 1x1 RoHS : Compliant |
| 11,000 | |
 Chip 1 Exchange | RK73K1E750JD | KOA Speer Electronics Inc | INSTOCK | 9,945 | ||
| LPT670HE7510 | INSTOCK | 7,900 | ||||
| LST676-Q2-E7510 | INSTOCK | 7,500 | ||||
| AT30TSE758A-XM8M-T | Atmel Corporation | INSTOCK RoHS : Compliant | 6,500 | |||
| P6KE75A | GII | INSTOCK | 4,000 | |||
| P6KE75A-E3/54 | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 3,980 | |||
| D55342H07B4E75STR | INSTOCK | 3,250 | ||||
| P6KE75CA | GS Battery | INSTOCK | 3,030 | |||
| SFM415TE7508 | Siemens | INSTOCK | 2,000 | |||
| 1.5KE7.5A_AY_10001 | PanJit Semiconductor | INSTOCK RoHS : Compliant | 1,589 | |||
| JXE75/1-12-50/50-FU-LF | Jauch Quartz America | INSTOCK | 800 | |||
| JXE75/1 24MHZ | INSTOCK | 399 | ||||
| 50050*=WE - 750 050 050* | MIDC | INSTOCK | 301 | |||
| E-75/120-RACK-LAT/E1-V | INSTOCK | 70 | ||||
| EP4CE75F23C8N | Altera Corporation | INSTOCK RoHS : Compliant | 60 | |||
 Avnet Abacus | MMA02040E7509BB300 | Vishay Intertechnologies | - Tape and Reel (Alt: MMA02040E7509BB300) RoHS : Compliant | 6,000 | ||
| M55342K06B4E75RS2 | Vishay Intertechnologies | SMD Chip Resistor 475 kohm 1 150 mW 0805 2012 Metric Thin Film Established Reliability (Alt: M55342K06B4E75RS2) RoHS : Not Compliant | 1,000 | |||
| UE75A206000T | Amphenol Corporation | Conn SFP RCP SMD 20 POS 08mm Solder RA SMD 20 Terminal 1 Port TR - Tape and Reel (Alt: UE75A206000T) RoHS : Compliant | 500 | |||
| XCSE7511 | Telemechanique Sensors | (Alt: XCSE7511) RoHS : Compliant | 0 | |||
| TE750B3R3J | TE Connectivity | Resistor 33 Ohm 5 750 W Wirewound High Power Solder Lug (Alt: 1879452-7) RoHS : Compliant | 0 | |||
| RE75N30R0C02 | Vishay Intertechnologies | (Alt: RE75N30R0C02) RoHS : Compliant | 0 | |||
| P1206E7501BNT | Vishay Intertechnologies | - Tape and Reel (Alt: P1206E7501BNT) RoHS : Compliant | 0 | |||
| RN73C1E75RBTD | TE Connectivity | SMD Chip Resistor 75 Ohm 01 63 mW 0402 1005 Metric Thin Film (Alt: 5-1879125-1) RoHS : Compliant | 0 | |||
| STE750-75T4KIE3 | Vishay Intertechnologies | (Alt: STE750-75T4KIE3) RoHS : Compliant | 0 | |||
| PTN0805E7502BST0 | Vishay Intertechnologies | SMD Chip Resistor 75 kohm 01 200 mW 0805 2012 Metric Thin Film Precision PTN Series - Tape and Reel (Alt: PTN0805E7502BST0) RoHS : Compliant | 0 | |||
| PRQE75W-E12-S28-D | Bel Fuse | dcdc isolated 75 W 975 Vdc input 28 Vdc 267 A single regulated output DIP (Alt: PRQE75W-E12-S28-D) RoHS : Compliant | 0 | |||
| MMA0204WE7501BB100 | Vishay Intertechnologies | MMA 020415 01 VG03 B1 7K5 - Tape and Reel (Alt: MMA0204WE7501BB100) RoHS : Compliant | 0 | |||
GQM1875C2E750JB12D | Murata Manufacturing Co Ltd | SMD Multilayer Ceramic Capacitor 75 pF 250 V 0603 1608 Metric 5 C0G NP0 GQM Series (Alt: GQM1875C2E750JB12D) RoHS : Compliant | 0 | |||
| T495B106K010ATE750 | KEMET Corporation | Surface Mount Tantalum Capacitor 10 uF 10 V 1411 3528 Metric 10 750 mohm 337 mA (Alt: T495B106K010ATE750) RoHS : Compliant | 0 | |||
| T495C225K035ATE750 | KEMET Corporation | Surface Mount Tantalum Capacitor 22 uF 35 V 2312 6032 Metric 10 750 mohm 383 mA - Tape and Reel (Alt: T495C225K035ATE750) RoHS : Compliant | 0 | |||
Avnet Asia | T495B106K010ATE750 | KEMET Corporation | Surface Mount Tantalum Capacitor, 10 uF, 10 V, 1411 [3528 Metric], ? 10%, 750 mohm, 337 mA (Alt: T495B106K010ATE750) RoHS : Compliant |
| 0 | |
| PHPA2512E75R0BSTS | Vishay Intertechnologies | (Alt: PHPA2512E75R0BSTS) RoHS : Compliant | 0 | |||
| SIT1602AC-12-18E-75.000000G | SiTime Corporation | (Alt: SIT1602AC-12-18E-75.000000G) RoHS : Compliant | 0 | |||
| M55342K12B4E75RS6 | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 100 mW, 0603 [1608 Metric], Thin Film, Established Reliability (Alt: M55342K12B4E75RS6) RoHS : Not Compliant | 0 | |||
| M55342K12B4E75RTSV | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 100 mW, 0603 [1608 Metric], Thin Film, Established Reliability (Alt: M55342K12B4E75RTSV) RoHS : Not Compliant | 0 | |||
| PHPA2512E75R0BST1 | Vishay Intertechnologies | (Alt: PHPA2512E75R0BST1) RoHS : Compliant | 0 | |||
TWAE757M075CBEZ0700 | Kyocera AVX Components | (Alt: TWAE757M075CBEZ0700) RoHS : Compliant | 0 | |||
| UE75-A20-3000T | Amphenol Corporation | Pluggable I/O Connector, SFP, 20 Contacts, 1 x 1 (Port), Surface Mount Right Angle, UE75 Series (Alt: UE75-A20-3000T) RoHS : Compliant | 0 | |||
| M55342H12B4E75RTS | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 100 mW, 0603 [1608 Metric], Thin Film, Established Reliability (Alt: M55342H12B4E75RTS) RoHS : Not Compliant | 0 | |||
| PHP01206E75R0BST5 | Vishay Intertechnologies | (Alt: PHP01206E75R0BST5) RoHS : Compliant | 0 | |||
| M55342K12B4E75RS2 | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 100 mW, 0603 [1608 Metric], Thin Film, Established Reliability (Alt: M55342K12B4E75RS2) RoHS : Not Compliant | 0 | |||
| M55342K12B4E75RWL | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 100 mW, 0603 [1608 Metric], Thin Film, Established Reliability (Alt: M55342K12B4E75RWL) RoHS : Not Compliant | 0 | |||
| 1V5KE75CA | Taiwan Semiconductor | Transient Voltage Suppressor Bi-Directional 64.1V 1500W 2-Pin DO-201AE (Alt: 1V5KE75CA) RoHS : Compliant | 0 | |||
| STE750-75T4MI | Vishay Intertechnologies | (Alt: STE750-75T4MI) RoHS : Not Compliant | 0 | |||
| PHP02512E75R0BST5 | Vishay Intertechnologies | (Alt: PHP02512E75R0BST5) RoHS : Compliant | 0 | |||
 Avnet Silica | M1.5KE7.5AE3 | Microchip Technology Inc | (Alt: M1.5KE7.5AE3) RoHS : Compliant | 0 | ||
| M1.5KE7.5CAE3 | Microchip Technology Inc | (Alt: M1.5KE7.5CAE3) RoHS : Compliant | 0 | |||
| MSMCJLCE7.5AE3 | Microchip Technology Inc | (Alt: MSMCJLCE75AE3) RoHS : Compliant | 0 | |||
| MSMCJLCE7.5A/TR | Microchip Technology Inc | (Alt: MSMCJLCE75A/TR) RoHS : Not Compliant | 0 | |||
| MASMCJLCE7.5AE3 | Microchip Technology Inc | (Alt: MASMCJLCE75AE3) RoHS : Compliant | 0 | |||
| MSMCJLCE7.5AE3/TR | Microchip Technology Inc | (Alt: MSMCJLCE75AE3/TR) RoHS : Compliant | 0 | |||
| AT30TSE754A-SS8M-B | Microchip Technology Inc | (Alt: AT30TSE754A-SS8M-B) RoHS : Compliant | 0 | |||
| AT30TSE758A-SS8M-T | Microchip Technology Inc | (Alt: AT30TSE758A-SS8M-T) RoHS : Compliant | 0 | |||
| AT30TSE754A-XM8M-B | Microchip Technology Inc | (Alt: AT30TSE754A-XM8M-B) RoHS : Compliant | 0 | |||
AT30TSE754A-MA8M-T | Microchip Technology Inc | (Alt: AT30TSE754A-MA8M-T) RoHS : Compliant | 0 | |||
| AT30TSE758A-XM8M-B | Microchip Technology Inc | (Alt: AT30TSE758A-XM8M-B) RoHS : Compliant | 0 | |||
| AT30TSE754A-XM8M-T | Microchip Technology Inc | (Alt: AT30TSE754A-XM8M-T) RoHS : Compliant | 0 | |||
| P6KE7.5A _AY _10001 | PanJit Semiconductor | (Alt: P6KE7.5A_AY_10001) RoHS : Compliant | 0 | |||
| 1.5KE7.5CA_ R2 _10001 | PanJit Semiconductor | (Alt: 1.5KE7.5CA_R2_10001) RoHS : Compliant | 0 | |||
| SIT1602AI-13-33E-75.000000D | SiTime Corporation | (Alt: SIT1602AI-13-33E-75.000000D) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | ANLTE7-50HRA | Multi-Tech Systems Inc | LTE Antenna, 7.75" (2 dBi). 50-pack |
| 0 | |
| ASE7-50.000MHZ-LC-T | Abracon Corporation |
| 0 | |||
| ASE7-50.000MHZ-LR-T | Abracon Corporation |
| 0 | |||
 Chip-Germany GmbH | UE75-A20-2000T | Amphenol Corporation | RoHS : Compliant | 26 | ||
 Component Electronics, Inc | RM73B3ATE752J | KOA Speer Electronics Inc | IN STOCK SHIP TODAY RoHS : Not Compliant | 3,979 | ||
| RK73B2HTTE750J | KOA Speer Electronics Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 3,900 | ||
| T495B106K010ATE750 | KEMET Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,105 | ||
| 1.5KE75CA | Littelfuse Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 1,000 | ||
| K50-3C1-SE75.0000MR | KYOCERA Corporation | IN STOCK SHIP TODAY | 995 | |||
| MBA0204-50-1%-PE-75R | Vishay Beyschlag | IN STOCK SHIP TODAY |
| 430 | ||
| P6KE75A-E3 | GS Battery | IN STOCK SHIP TODAY |
| 390 | ||
| MBB0207-15-0.1%-PE-75R5 | Philips Semiconductors | IN STOCK SHIP TODAY |
| 225 | ||
| 1.5KE7.5CA | General Instrument | IN STOCK SHIP TODAY |
| 179 | ||
| 1.5KE7.5CA | Littelfuse Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 96 | ||
| P1206E75R0BBT | TEXAS COMP | IN STOCK SHIP TODAY | 94 | |||
| 1.5KE75CA | STMicroelectronics | IN STOCK SHIP TODAY RoHS : Compliant |
| 65 | ||
| RE75G5R00 | Ohmite Mfg Co | IN STOCK SHIP TODAY |
| 22 | ||
| RN55E7500F | Vishay Dale | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 17 | ||
| MS3130E7-50S | IN STOCK SHIP TODAY |
| 1 | |||
 DB Roberts | E-750 | Bivar Inc | ECON-O-GIDES, PRESS-IN CARD GUIDE, 7.5 IN. LENGTH, 0.078 |
| 73 | |
| SLCSE-750-4-01 | Essentra Components | 0 | ||||
| SLCSE-750-3-01 | Essentra Components | Wire SdlSpacerNatural3/16 in Spc Wire Saddle Spacer Natural | 0 | |||
 EBV Elektronik | BXE75T60HFHD | Bridgelux Inc | Transistor IGBT NCH 600V 150A 3Pin TO247 Tube (Alt: BXE75T60HFHD) RoHS : Compliant | 1,000 | ||
| P6KE75A | Taiwan Semiconductor | Diode TVS Single UniDirectional 641V 600W 2Pin DO204AC (Alt: P6KE75A) RoHS : Compliant | 0 | |||
| P6KE75A-E3/54 | Vishay Intertechnologies | Diode TVS Single UniDir 64V 600W 2Pin DO15 TR (Alt: P6KE75A-E3/54) RoHS : Compliant | 0 | |||
| P6KE7.5A-E3/54 | Vishay Intertechnologies | Diode TVS Single UniDir 64V 600W 2Pin DO15 TR (Alt: P6KE7.5A-E3/54) RoHS : Compliant | 0 | |||
| TLE75080ESDXUMA1 | Infineon Technologies AG | SPIDER (Alt: SP001635022) RoHS : Compliant | 0 | |||
| TLE75602ESDXUMA1 | Infineon Technologies AG | SPIDER (Alt: SP001635030) RoHS : Compliant | 0 | |||
| TLE75080ESHXUMA1 | Infineon Technologies AG | SPIDER (Alt: SP001635024) RoHS : Compliant | 0 | |||
| TLE75620ESTXUMA1 | Infineon Technologies AG | (Alt: SP001635034) RoHS : Compliant | 0 | |||
| AT30TSE754A-SS8M-B | Microchip Technology Inc | (Alt: AT30TSE754A-SS8M-B) RoHS : Compliant | 0 | |||
| AT30TSE758A-SS8M-T | Microchip Technology Inc | (Alt: AT30TSE758A-SS8M-T) RoHS : Compliant | 0 | |||
| AT30TSE754A-XM8M-B | Microchip Technology Inc | (Alt: AT30TSE754A-XM8M-B) RoHS : Compliant | 0 | |||
| AT30TSE754A-MA8M-T | Microchip Technology Inc | (Alt: AT30TSE754A-MA8M-T) RoHS : Compliant | 0 | |||
| TLE75602ESHDBTOBO1 | Infineon Technologies AG | TLE75602ESH Eight Channel LowSide and HighSide Power Switch Evaluation Board (Alt: SP002641482) RoHS : Compliant | 0 | |||
| AT30TSE758A-XM8M-B | Microchip Technology Inc | (Alt: AT30TSE758A-XM8M-B) RoHS : Compliant | 0 | |||
| AT30TSE754A-XM8M-T | Microchip Technology Inc | (Alt: AT30TSE754A-XM8M-T) RoHS : Compliant | 0 | |||
 FDH Electronics | MS3446E7-50P | TE Connectivity | Placeholder | 10 | ||
| PE75903 | Connector Technology Inc | Cable Assembly |
| 1 | ||
| MWDL-51S-4E7-5B | Glenair Inc | Connector | 0 | |||
| MWDM1L-15S-6E7-50B | Glenair Inc | Connector MIL M RoHS : Not Compliant | 0 | |||
| MWDM1L-100P-8E7-5P | Glenair Inc | Connector MIL M RoHS : Not Compliant | 0 | |||
| MS3320-E7.5V | Crouzet | Circuit Breaker | 0 | |||
| MWDM1L-15S-8E7-5P | Glenair Inc | Connector MIL M RoHS : Not Compliant | 0 | |||
| MWDM2L-100P-8E7-5B | Glenair Inc | Connector MIL M RoHS : Compliant | 0 | |||
| MWDL-21S-4E7-5B | Glenair Inc | Connector | 0 | |||
| MWDM1L-31P-6E7-5P | Glenair Inc | Connector | 0 | |||
| MWDM1L-100GP-6E7-50S | Glenair Inc | Connector | 0 | |||
| MWDM2L-37S-6E7-54S | Glenair Inc | Connector MIL M | 0 | |||
| MWDM2L-25P-4E7-5B | Glenair Inc | Connector | 0 | |||
| MWDM2L-51S-4E7-50B | Glenair Inc | Connector | 0 | |||
| MWDL-25S-4E7-5B | Glenair Inc | Connector | 0 | |||
 Maritex | 1.5KE7.5CA | Cyg Wayon Circuit Protection Co Ltd | Transil Diode (TVS); 1500W; 6.4V; 134.5A; bidirectional; -55+175 deg.C; THT; DO201AD |
| 3,266 | |
 Master Electronics | E75 | Thomas & Betts | Ring Tongue Terminal 6AWG Electrolytic Copper 37.84mm Electro Tin RoHS : Compliant |
| 125 | |
| M1.5KE7.5CAE3 | Microchip Technology Inc | TVS 7.5V 5% 1500W bi RoHS : Compliant |
| 0 | ||
| MP6KE75A | Microchip Technology Inc | TVS 75V 5% 600W uni RoHS : Compliant |
| 0 | ||
| MXLSMCGLCE75AE3 | Microchip Technology Inc | Low Cap TVS 75V 5% 1500W uni 100pF RoHS : Compliant |
| 0 | ||
| TE750B3R3J | TE Connectivity | TE 750W 3R3 5% Bracket Tubular Resistors Fixed Resistor RoHS : Compliant |
| 0 | ||
| D55342H07B4E75R | TT Electronics Resistors | RoHS : Compliant |
| 0 | ||
| CP31E/7.5D | Fuji Electric Co Ltd | RoHS : Compliant |
| 0 | ||
| MP6KE7.5CAE3 | Microchip Technology Inc | TVS 7.5V 5% 600W bi RoHS : Compliant |
| 0 | ||
| MP6KE75CA | Microchip Technology Inc | TVS 75V 5% 600W bi RoHS : Compliant |
| 0 | ||
| AT30TSE754A-SS8M-B | Microchip Technology Inc | Temp Sensor Digital Serial (2-Wire I2C SMBus) 8-Pin SOIC Tube RoHS : Compliant |
| 0 | ||
| MAP4KE75AE3 | Microchip Technology Inc | TVS 75V 5% 400W uni RoHS : Compliant |
| 0 | ||
| MP4KE7.5CAE3 | Microchip Technology Inc | TVS 7.5V 5% 400W bi RoHS : Compliant |
| 0 | ||
| MXLSMCJLCE75AE3 | Microchip Technology Inc | Low Cap TVS 75V 5% 1500W uni 100pF RoHS : Compliant |
| 0 | ||
| RN73C1E75RBTD | TE Connectivity | RN 0402 75R 0.1% 10PPM 5K RL MOQ Reduction RoHS : Compliant |
| 0 | ||
| E75793-000 | TE Connectivity | TXR40AU00-1210BI MOQ Reduction RoHS : Not Compliant |
| 0 | ||
 Neutron USA | E75 | ABB Low Voltage Products and Systems | Fixed Terminal Blocks NONINS BS RNG TERM NO6 AWG 1/2 BOLT |
| 50 | |
| PRQE75W-E12-S24-D | CUI Inc | DC/DC Converters - 75 W, 24 Vdc, 3.12 A, single regulated output, DIP RoHS : Compliant |
| 50 | ||
| XCSTE7512 | Telemechanique Sensors | Limit Switches SAFETY INTERLOCK 240VAC 5AMP T-XCS+O |
| 50 | ||
| E750 | Sola/Hevi-Duty | Industrial Control Transformers 0.750KVA 240X480-120 |
| 20 | ||
| GAE75-10-11-81 | ABB Low Voltage Products and Systems | Gae75, 1P Dc Contr, 24Vdc |
| 5 | ||
| EA5E750Q | Banner Engineering Corp | Emitter, 750mm, Range 0.4-4m, 5mm Resolution, 12-30VDC, QD, EZ-Array |
| 5 | ||
| LE750 | ABB Low Voltage Products and Systems | Mounting Kit, LUG HARDWARE KIT for contactors AF580-AF750 |
| 2 | ||
| ZAE75-81 | ABB Low Voltage Products and Systems | AE45-75 COIL; 24VDC |
| 0 | ||
| AE75-30-00-81 | ABB Low Voltage Products and Systems | AE75 3P CONTR 24VDC |
| 0 | ||
| PRQE75W-E12-S48-D | CUI Inc | Isolated DC/DC Converter, 75W, 9-75Vin, 48V 1.56A, Posi Logic, DIP RoHS : Compliant |
| 0 | ||
| FLE7511 | Brother International | 1PK 0.82X1.7IN 0.41X1.7IN FOLD POLYP FLAG BLACKINK ON GREEN 72LABL |
| 0 | ||
| PRQE75W-E12-S12-D | CUI Inc | Isolated DC/DC Converter, 75W, 9-75Vin, 12V 6.25A, Posi Logic, DIP RoHS : Compliant |
| 0 | ||
| WBE750-100NAS | NETGEAR | 1PT INSIGHT MANAGED WIFI 7 TRI-BAND |
| 0 | ||
| T22CT 1TE75L000000 | Sifam Tinsley Precision Instrumentation Ltd | Current Transducer, True RMS, 4-20 mA DC Out., 250A |
| 0 | ||
| GAE75-10-00-87 | ABB Low Voltage Products and Systems | DC SWING CONT. 75A 600V 125VDC COIL |
| 0 | ||
 Pasternack Enterprises US | PE7510-10 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 50 GHz, Nominal Attenuation: 10 dB, VSWR, Max: 1.45:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: 2.4mm, Connector-In Gender: Male, Connector-Out Series: 2.4mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 10 dB Fixed Attenuator, 2.4mm Male to 2.4mm Female Stainless Steel Body Rated to 2 Watts Up to 50 GHz. PE7510-10 is a fixed 10 dB attenuator from Pasternack. This 10 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.45:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with 2.4mm connectors is constructed with stainless steel body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 10 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.4mm attenuator has a male gender on side 1 and a 2.4mm female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 10 dB. The Pasternack PE7510-10 attenuator is rated for up to 50 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 10 dB attenuator has a stainless steel connector built with plating. Our fixed RF attenuator PE7510-10 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 10 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 7 | |
| PE7510-3 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 50 GHz, Nominal Attenuation: 3 dB, VSWR, Max: 1.45:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: 2.4mm, Connector-In Gender: Male, Connector-Out Series: 2.4mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 3 dB Fixed Attenuator, 2.4mm Male to 2.4mm Female Stainless Steel Body Rated to 2 Watts Up to 50 GHz. PE7510-3 is a fixed 3 dB attenuator from Pasternack. This 3 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.45:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with 2.4mm connectors is constructed with stainless steel body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 3 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.4mm attenuator has a male gender on side 1 and a 2.4mm female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 3 dB. The Pasternack PE7510-3 attenuator is rated for up to 50 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 3 dB attenuator has a stainless steel connector built with plating. Our fixed RF attenuator PE7510-3 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 3 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 7 | ||
| PE7510-20 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 50 GHz, Nominal Attenuation: 20 dB, VSWR, Max: 1.45:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: 2.4mm, Connector-In Gender: Male, Connector-Out Series: 2.4mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 20 dB Fixed Attenuator, 2.4mm Male to 2.4mm Female Stainless Steel Body Rated to 2 Watts Up to 50 GHz. PE7510-20 is a fixed 20 dB attenuator from Pasternack. This 20 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.45:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with 2.4mm connectors is constructed with stainless steel body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 20 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.4mm attenuator has a male gender on side 1 and a 2.4mm female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 20 dB. The Pasternack PE7510-20 attenuator is rated for up to 50 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 20 dB attenuator has a stainless steel connector built with plating. Our fixed RF attenuator PE7510-20 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 20 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 6 | ||
| PE7500-10 | Pasternack Enterprises | Key Specifications, Design: Continuously Variable, Maximum Frequency: 4 GHz, Impedance: 50 Ohm, Power Maximum: 5 Watt, VSWR Maximum: 1.7:1, Connector Series 1: SMA, Connector Gender 1: Female, Connector Series 2: SMA, Connector Gender 2: Female, Minimum Attenuation: 0 dB, Maximum Attenuation: 10 dB, Step Type: Dial. 0 to 10 dB Variable Attenuator, SMA Female to SMA Female Rated to 5 Watts from 2 GHz to 4 GHz. PE7500-10 is a variable attenuator from Pasternack. This SMA microwave attenuator is a continuously variable attenuator design. Our coaxial 50 Ohm adjustable attenuator is precision manufactured to RF and microwave industry specifications. The Pasternack variable RF attenuator has a SMA female gender for connector 1 and a SMA female for connector 2. Our PE7500-10 variable attenuator has a maximum attenuation of 10 dB. This microwave variable attenuator has a frequency range of 2 GHz to 4 GHz and a maximum VSWR of 1.7:1. Our continuously variable attenuator is rated to 5 Watts at the stated attenuation. This variable RF attenuator has a flat attenuation accuracy of 1.5 dB over operating frequency range and a maximum insertion loss of 0.5 dB. Our continuously variable attenuator has an overall length of 2 inches, width of 1.25 inches, and weighs 0.02 lbs. This radio frequency continuously variable attenuator with SMA connectors is built with aluminum. Additional dimensions and specifications for this 10 dB variable attenuator are in our downloadable PDF datasheet above. Our variable attenuator PE7500-10 is shipped the same day as purchased from Pasternack's facility. This attenuator is part of our RF, microwave and millimeter-wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF variable attenuator as per your requirements. |
| 3 | ||
| PE7510-1 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 50 GHz, Nominal Attenuation: 1 dB, VSWR, Max: 1.45:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: 2.4mm, Connector-In Gender: Male, Connector-Out Series: 2.4mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 1 dB Fixed Attenuator, 2.4mm Male to 2.4mm Female Stainless Steel Body Rated to 2 Watts Up to 50 GHz. PE7510-1 is a fixed 1 dB attenuator from Pasternack. This 1 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.45:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with 2.4mm connectors is constructed with stainless steel body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 1 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.4mm attenuator has a male gender on side 1 and a 2.4mm female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 1 dB. The Pasternack PE7510-1 attenuator is rated for up to 50 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 1 dB attenuator has a stainless steel connector built with plating. Our fixed RF attenuator PE7510-1 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 1 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 3 | ||
| PE7510-2 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 50 GHz, Nominal Attenuation: 2 dB, VSWR, Max: 1.45:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: 2.4mm, Connector-In Gender: Male, Connector-Out Series: 2.4mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 2 dB Fixed Attenuator, 2.4mm Male to 2.4mm Female Stainless Steel Body Rated to 2 Watts Up to 50 GHz. PE7510-2 is a fixed 2 dB attenuator from Pasternack. This 2 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.45:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with 2.4mm connectors is constructed with stainless steel body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 2 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.4mm attenuator has a male gender on side 1 and a 2.4mm female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 2 dB. The Pasternack PE7510-2 attenuator is rated for up to 50 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 2 dB attenuator has a stainless steel connector built with plating. Our fixed RF attenuator PE7510-2 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 2 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 3 | ||
| PE7511-30 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 50 GHz, Nominal Attenuation: 30 dB, VSWR, Max: 1.45:1, Input Power, Max (CW): 5 Watts, Body Material: Aluminum, Connector-In Series: 2.4mm, Connector-In Gender: Male, Connector-Out Series: 2.4mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 30 dB Fixed Attenuator, 2.4mm Male to 2.4mm Female Aluminum Body Rated to 5 Watts Up to 50 GHz. PE7511-30 is a fixed 30 dB attenuator from Pasternack. This 30 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 5 Watts. This attenuator has a maximum VSWR of 1.45:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with 2.4mm connectors is constructed with aluminum body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 30 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.4mm attenuator has a male gender on side 1 and a 2.4mm female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 30 dB. The Pasternack PE7511-30 attenuator is rated for up to 50 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 30 dB attenuator has a stainless steel connector built with plating. Our fixed RF attenuator PE7511-30 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 30 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 3 | ||
| PE7501-20 | Pasternack Enterprises | Key Specifications, Design: Continuously Variable, Maximum Frequency: 14.5 GHz, Impedance: 50 Ohm, Power Maximum: 5 Watt, VSWR Maximum: 1.5:1, Connector Series 1: SMA, Connector Gender 1: Female, Connector Series 2: SMA, Connector Gender 2: Female, Minimum Attenuation: 0 dB, Maximum Attenuation: 20 dB, Step Type: Dial. 0 to 20 dB Variable Attenuator, SMA Female to SMA Female Rated to 5 Watts from 10.7 GHz to 14.5 GHz. PE7501-20 is a variable attenuator from Pasternack. This SMA microwave attenuator is a continuously variable attenuator design. Our coaxial 50 Ohm adjustable attenuator is precision manufactured to RF and microwave industry specifications. The Pasternack variable RF attenuator has a SMA female gender for connector 1 and a SMA female for connector 2. Our PE7501-20 variable attenuator has a maximum attenuation of 20 dB. This microwave variable attenuator has a frequency range of 10.7 GHz to 14.5 GHz and a maximum VSWR of 1.5:1. Our continuously variable attenuator is rated to 5 Watts at the stated attenuation. This variable RF attenuator has a flat attenuation accuracy of 1.5 dB over operating frequency range and a maximum insertion loss of 0.5 dB. Our continuously variable attenuator has an overall length of 2 inches, width of 1.25 inches, and weighs 0.02 lbs. This radio frequency continuously variable attenuator with SMA connectors is built with aluminum. Additional dimensions and specifications for this 20 dB variable attenuator are in our downloadable PDF datasheet above. Our variable attenuator PE7501-20 is shipped the same day as purchased from Pasternack's facility. This attenuator is part of our RF, microwave and millimeter-wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF variable attenuator as per your requirements. |
| 2 | ||
| PE7502-20 | Pasternack Enterprises | Key Specifications, Design: Continuously Variable, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Power Maximum: 5 Watt, VSWR Maximum: 1.6:1, Connector Series 1: SMA, Connector Gender 1: Female, Connector Series 2: SMA, Connector Gender 2: Female, Minimum Attenuation: 0 dB, Maximum Attenuation: 20 dB, Step Type: Dial. 0 to 20 dB Variable Attenuator, SMA Female to SMA Female Rated to 5 Watts from 8 GHz to 18 GHz. PE7502-20 is a variable attenuator from Pasternack. This SMA microwave attenuator is a continuously variable attenuator design. Our coaxial 50 Ohm adjustable attenuator is precision manufactured to RF and microwave industry specifications. The Pasternack variable RF attenuator has a SMA female gender for connector 1 and a SMA female for connector 2. Our PE7502-20 variable attenuator has a maximum attenuation of 20 dB. This microwave variable attenuator has a frequency range of 8 GHz to 18 GHz and a maximum VSWR of 1.6:1. Our continuously variable attenuator is rated to 5 Watts at the stated attenuation. This variable RF attenuator has a flat attenuation accuracy of 2 dB over operating frequency range and a maximum insertion loss of 0.5 dB. Our continuously variable attenuator has an overall length of 2 inches, width of 1.25 inches, and weighs 0.02 lbs. This radio frequency continuously variable attenuator with SMA connectors is built with aluminum. Additional dimensions and specifications for this 20 dB variable attenuator are in our downloadable PDF datasheet above. Our variable attenuator PE7502-20 is shipped the same day as purchased from Pasternack's facility. This attenuator is part of our RF, microwave and millimeter-wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF variable attenuator as per your requirements. |
| 2 | ||
| PE7511-10 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 50 GHz, Nominal Attenuation: 10 dB, VSWR, Max: 1.45:1, Input Power, Max (CW): 5 Watts, Body Material: Aluminum, Connector-In Series: 2.4mm, Connector-In Gender: Male, Connector-Out Series: 2.4mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 10 dB Fixed Attenuator, 2.4mm Male to 2.4mm Female Aluminum Body Rated to 5 Watts Up to 50 GHz. PE7511-10 is a fixed 10 dB attenuator from Pasternack. This 10 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 5 Watts. This attenuator has a maximum VSWR of 1.45:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with 2.4mm connectors is constructed with aluminum body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 10 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.4mm attenuator has a male gender on side 1 and a 2.4mm female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 10 dB. The Pasternack PE7511-10 attenuator is rated for up to 50 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 10 dB attenuator has a stainless steel connector built with plating. Our fixed RF attenuator PE7511-10 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 10 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 2 | ||
| PE7510-30 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 50 GHz, Nominal Attenuation: 30 dB, VSWR, Max: 1.45:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: 2.4mm, Connector-In Gender: Male, Connector-Out Series: 2.4mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 30 dB Fixed Attenuator, 2.4mm Male to 2.4mm Female Stainless Steel Body Rated to 2 Watts Up to 50 GHz. PE7510-30 is a fixed 30 dB attenuator from Pasternack. This 30 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.45:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with 2.4mm connectors is constructed with stainless steel body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 30 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.4mm attenuator has a male gender on side 1 and a 2.4mm female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 30 dB. The Pasternack PE7510-30 attenuator is rated for up to 50 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 30 dB attenuator has a stainless steel connector built with plating. Our fixed RF attenuator PE7510-30 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 30 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 1 | ||
| PE7511-20 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 50 GHz, Nominal Attenuation: 20 dB, VSWR, Max: 1.45:1, Input Power, Max (CW): 5 Watts, Body Material: Aluminum, Connector-In Series: 2.4mm, Connector-In Gender: Male, Connector-Out Series: 2.4mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 20 dB Fixed Attenuator, 2.4mm Male to 2.4mm Female Aluminum Body Rated to 5 Watts Up to 50 GHz. PE7511-20 is a fixed 20 dB attenuator from Pasternack. This 20 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 5 Watts. This attenuator has a maximum VSWR of 1.45:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with 2.4mm connectors is constructed with aluminum body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 20 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.4mm attenuator has a male gender on side 1 and a 2.4mm female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 20 dB. The Pasternack PE7511-20 attenuator is rated for up to 50 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 20 dB attenuator has a stainless steel connector built with plating. Our fixed RF attenuator PE7511-20 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 20 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 1 | ||
| PE7511-3 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 50 GHz, Nominal Attenuation: 3 dB, VSWR, Max: 1.45:1, Input Power, Max (CW): 5 Watts, Body Material: Aluminum, Connector-In Series: 2.4mm, Connector-In Gender: Male, Connector-Out Series: 2.4mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 3 dB Fixed Attenuator, 2.4mm Male to 2.4mm Female Aluminum Body Rated to 5 Watts Up to 50 GHz. PE7511-3 is a fixed 3 dB attenuator from Pasternack. This 3 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 5 Watts. This attenuator has a maximum VSWR of 1.45:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with 2.4mm connectors is constructed with aluminum body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 3 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.4mm attenuator has a male gender on side 1 and a 2.4mm female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 3 dB. The Pasternack PE7511-3 attenuator is rated for up to 50 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 3 dB attenuator has a stainless steel connector built with plating. Our fixed RF attenuator PE7511-3 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 3 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 1 | ||
| PE7511-6 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 50 GHz, Nominal Attenuation: 6 dB, VSWR, Max: 1.45:1, Input Power, Max (CW): 5 Watts, Body Material: Aluminum, Connector-In Series: 2.4mm, Connector-In Gender: Male, Connector-Out Series: 2.4mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 6 dB Fixed Attenuator, 2.4mm Male to 2.4mm Female Aluminum Body Rated to 5 Watts Up to 50 GHz. PE7511-6 is a fixed 6 dB attenuator from Pasternack. This 6 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 5 Watts. This attenuator has a maximum VSWR of 1.45:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with 2.4mm connectors is constructed with aluminum body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 6 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.4mm attenuator has a male gender on side 1 and a 2.4mm female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 6 dB. The Pasternack PE7511-6 attenuator is rated for up to 50 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 6 dB attenuator has a stainless steel connector built with plating. Our fixed RF attenuator PE7511-6 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 6 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 1 | ||
| PE7510-6 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 50 GHz, Nominal Attenuation: 6 dB, VSWR, Max: 1.45:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: 2.4mm, Connector-In Gender: Male, Connector-Out Series: 2.4mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 6 dB Fixed Attenuator, 2.4mm Male to 2.4mm Female Stainless Steel Body Rated to 2 Watts Up to 50 GHz. PE7510-6 is a fixed 6 dB attenuator from Pasternack. This 6 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.45:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with 2.4mm connectors is constructed with stainless steel body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 6 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.4mm attenuator has a male gender on side 1 and a 2.4mm female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 6 dB. The Pasternack PE7510-6 attenuator is rated for up to 50 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 6 dB attenuator has a stainless steel connector built with plating. Our fixed RF attenuator PE7510-6 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 6 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 0 | ||
 TE Connectivity | RQ73C1E75RBTD | TE Connectivity | RQ 0402 75R 0.1% 10PPM 5K RL Resistance Value: 75 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0402 Surface Mount Resistor | 75 Ω Thin Film Precision Resistor .1 % | Part Number: RQ73C1E75RBTD | Internal Number: 2-2176362-7 | TE Connectivity RoHS : Compliant |
| 10,711 | |
| RT73F1E75KBTH | TE Connectivity | RT 1E 0.125W 75K 0.1% 25PPM 10K RL Resistance Value: 75K Ω Element Type: Thick Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0402 Thick Film Precision Resistors - Type Rt73 Series | 75K Ω Thick Film Precision Resistor .1 % | Part Number: RT73F1E75KBTH | Internal Number: 3-2176756-3 | TE Connectivity RoHS : Compliant |
| 9,980 | ||
| RT73F1E750RBTH | TE Connectivity | RT 1E 0.125W 750R 0.1% 25PPM 10K RL Resistance Value: 750 Ω Element Type: Thick Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0402 Thick Film Precision Resistors - Type Rt73 Series | 750 Ω Thick Film Precision Resistor .1 % | Part Number: RT73F1E750RBTH | Internal Number: 3-2176754-9 | TE Connectivity RoHS : Compliant |
| 6,530 | ||
| RP73PF1E750RBTD | TE Connectivity | RP 1E 0.1W 750R 0.1% 25PPM 5K RL Resistance Value: 750 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0402 Surface Mount Resistor | 750 Ω Thin Film Precision Resistor .1 % | Part Number: RP73PF1E750RBTD | Internal Number: 8-2176305-2 | TE Connectivity RoHS : Compliant |
| 2,415 | ||
| TE750B1R0J | TE Connectivity | TE 750W 1R0 5% Bracket Resistance Value: 1 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Wirewound Resistor: Mineral & 2.5 Kw | 1 Ω Wire Wound 5 % Power Resistor | Part Number: TE750B1R0J | Internal Number: 1879452-1 | TE Connectivity RoHS : Compliant |
| 211 | ||
| TE750B10RJ | TE Connectivity | TE 750W 10R 5% Bracket Resistance Value: 10 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Wirewound Resistor: Mineral & 2.5 Kw | 10 Ω Wire Wound 5 % Power Resistor | Part Number: TE750B10RJ | Internal Number: 1-1879452-3 | TE Connectivity RoHS : Compliant |
| 14 | ||
| TE750B180RJ | TE Connectivity | TE 750W 180R 5% Bracket Resistance Value: 180 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Wirewound Resistor: Mineral & 2.5 Kw | 180 Ω Wire Wound 5 % Power Resistor | Part Number: TE750B180RJ | Internal Number: 2-1879452-8 | TE Connectivity RoHS : Compliant |
| 11 | ||
| TE750B2R7J | TE Connectivity | TE 750W 2R7 5% Bracket Resistance Value: 2.7 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Wirewound Resistor: Mineral & 2.5 Kw | 2.7 Ω Wire Wound 5 % Power Resistor | Part Number: TE750B2R7J | Internal Number: 1879452-6 | TE Connectivity RoHS : Compliant |
| 10 | ||
| TE750B2R2J | TE Connectivity | TE 750W 2R2 5% Bracket Resistance Value: 2.2 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Wirewound Resistor: Mineral & 2.5 Kw | 2.2 Ω Wire Wound 5 % Power Resistor | Part Number: TE750B2R2J | Internal Number: 1879452-5 | TE Connectivity RoHS : Compliant |
| 10 | ||
| TE750B47RJ | TE Connectivity | TE 750W 47R 5% Bracket Resistance Value: 47 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Wirewound Resistor: Mineral & 2.5 Kw | 47 Ω Wire Wound 5 % Power Resistor | Part Number: TE750B47RJ | Internal Number: 2-1879452-1 | TE Connectivity RoHS : Compliant |
| 7 | ||
| TE750B470RJ | TE Connectivity | TE 750W 470R 5% Bracket Resistance Value: 470 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Wirewound Resistor: Mineral & 2.5 Kw | 470 Ω Wire Wound 5 % Power Resistor | Part Number: TE750B470RJ | Internal Number: 3-1879452-3 | TE Connectivity RoHS : Compliant |
| 7 | ||
| TE750B12RJ | TE Connectivity | TE 750W 12R 5% Bracket Resistance Value: 12 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Wirewound Resistor: Mineral & 2.5 Kw | 12 Ω Wire Wound 5 % Power Resistor | Part Number: TE750B12RJ | Internal Number: 1-1879452-4 | TE Connectivity RoHS : Compliant |
| 6 | ||
| TE750B220RJ | TE Connectivity | TE 750W 220R 5% Bracket Resistance Value: 220 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Wirewound Resistor: Mineral & 2.5 Kw | 220 Ω Wire Wound 5 % Power Resistor | Part Number: TE750B220RJ | Internal Number: 2-1879452-9 | TE Connectivity RoHS : Compliant |
| 5 | ||
| TE750B33RJ | TE Connectivity | TE 750W 33R 5% Bracket Resistance Value: 33 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Wirewound Resistor: Mineral & 2.5 Kw | 33 Ω Wire Wound 5 % Power Resistor | Part Number: TE750B33RJ | Internal Number: 1-1879452-9 | TE Connectivity RoHS : Compliant |
| 2 | ||
| TE750B15RJ | TE Connectivity | TE 750W 15R 5% Bracket Resistance Value: 15 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Wirewound Resistor: Mineral & 2.5 Kw | 15 Ω Wire Wound 5 % Power Resistor | Part Number: TE750B15RJ | Internal Number: 1-1879452-5 | TE Connectivity RoHS : Compliant |
| 1 | ||
 Venkel Ltd. | MELFC0102-RE-7502DT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/8W;�25PPM;75K;�0.5% RoHS : Compliant | 0 | ||
| MELFC0204-ZE-7500CT | VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�25PPM;750R;�0.25% RoHS : Compliant | 0 | |||
| MELFC0207-XE-7502DT | VENKEL LTD | MELF Coated Thin Film CR;0207;1W;�25PPM;75K;�0.5% RoHS : Compliant | 0 | |||
| MELFM0207-VE-7500BT | VENKEL LTD | MELF Molded Thin Film CR;0207;1/2W;�25PPM;750R;�0.1% RoHS : Not Compliant | 0 | |||
| UPTF0402-16W-E-75R0AT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�25PPM;75R;�0.05% RoHS : Compliant | 0 | |||
| UPTF0805-10W-E-75R0AT | VENKEL LTD | Ultra Precision Thin Film CR;0805;1/10W;�25PPM;75R;�0.05% RoHS : Compliant | 0 | |||
| TFCR0201-20W-E-7500DT | VENKEL LTD | Thin Film CR;0201;1/20W;�25PPM;750R;�0.5% RoHS : Compliant | 0 | |||
| TFCR0402-16W-E-75R9FT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�25PPM;75.9R;�1% RoHS : Compliant | 0 | |||
| TFCR0603-10W-E-7590FT | VENKEL LTD | Thin Film CR;0603;1/10W;�25PPM;759R;�1% RoHS : Compliant | 0 | |||
| TFCR0603-10W-E-75R9BT | VENKEL LTD | Thin Film CR;0603;1/10W;�25PPM;75.9R;�0.1% RoHS : Compliant | 0 | |||
| TFCR0603-16W-E-7503FT | VENKEL LTD | Thin Film CR;0603;1/16W;�25PPM;750K ;�1% RoHS : Compliant | 0 | |||
| TFCR0603-16W-E-7591FT-1K | VENKEL LTD | Thin Film CR;0603;1/16W;�25PPM;7.59K;�1% RoHS : Compliant | 0 | |||
| TFCR0805-8W-E-7503CT | VENKEL LTD | Thin Film CR;0805;1/8W;�25PPM;750K ;�0.25% RoHS : Compliant | 0 | |||
| TFCR0805-8W-E-7593DT | VENKEL LTD | Thin Film CR;0805;1/8W;�25PPM;759K ;�0.5% RoHS : Compliant | 0 | |||
| TFCR1206-4W-E-7503FT-1K | VENKEL LTD | Thin Film CR;1206;1/4W;�25PPM;750K ;�1% RoHS : Compliant | 0 | |||
 Vyrian | TWAE757M060CBEZ0700 | KYOCERA AVX | Tantalum Capacitor, Polarized, Tantalum (wet), 60V, 20% +Tol, 20% -Tol, 750uF, Through Hole Mount | 16,810 | ||
| ADE7566ASTZF16 | Analog Devices Inc | Analog Circuit, 1 Func RoHS : Compliant | 11,824 | |||
| ADE7566ACPZF16 | Analog Devices Inc | Analog Circuit, 1 Func RoHS : Compliant | 11,599 | |||
| TWAE757K100SBYZ0700 | KYOCERA AVX | Tantalum Capacitor, Polarized, Tantalum (wet), 100V, 10% +Tol, 10% -Tol, 750uF, Through Hole Mount | 10,304 | |||
| ADE7566ASTZF16-RL | Analog Devices Inc | Analog Circuit, 1 Func RoHS : Compliant | 9,774 | |||
| TLE75602EMDXUMA1 | Infineon Technologies AG | Buffer/Inverter Based Peripheral Driver, 0.5A, PDSO24 RoHS : Compliant | 9,112 | |||
| MLCE7.5A | Microchip Technology Inc | Trans Voltage Suppressor Diode, 1500W, 7.5V V(RWM), Unidirectional, 1 Element, Silicon RoHS : Not Compliant | 6,289 | |||
| TP6KE75CA | Littelfuse Inc | Trans Voltage Suppressor Diode, 600W, 64.1V V(RWM), Bidirectional, 1 Element, Silicon, DO-204AC RoHS : Compliant | 5,975 | |||
| TLS24E754PT | Texas Instruments | 4,168 | ||||
EP4CE75F29C7N | Altera Corporation | Field Programmable Gate Array, 75408 CLBs, 472.5MHz, 75408-Cell, PBGA780 RoHS : Compliant | 3,231 | |||
| EP4CE75F23C7N | Intel Corporation | Field Programmable Gate Array, 4713 CLBs, 472.5MHz, 75408-Cell, PBGA484 RoHS : Compliant | 2,238 | |||
| EP4CE75F29 | Altera Corporation | Field Programmable Gate Array, 47 CLBs, PBGA780 | 2,037 | |||
| EP4CE75F29C7 | Altera Corporation | Field Programmable Gate Array, 75408-Cell, PBGA780 RoHS : Not Compliant | 1,722 | |||
| HAE75-24S48W | P-duke Technology | DC-DC Regulated Power Supply Module, 1 Output, 75W, Hybrid | 700 | |||
MSMCJLCE7.5AE3 | Microsemi Corporation (now Microchip) | Trans Voltage Suppressor Diode, 1500W, 7.5V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB RoHS : Compliant | 482 | |||
 Win Source Electronics | TLE75602-ESH?INFINEON | Infineon Technologies AG | Switches & Controller |
| 15,000 | |
| TLE75602-ESH | Infineon Technologies AG | 8 330mA TSDSO-24 Power Distribution Switches, Load Drivers RoHS RoHS : Compliant |
| 10,000 | ||
| TLE75008ESDXUMA1 | Infineon Technologies AG | IC PWR DRVR N-CHAN 1:8 TSDSO-24 RoHS : Compliant |
| 9,560 | ||
| TLE75602ESHXUMA1 | Infineon Technologies AG | IC PWR DRVR N-CHAN 1:8 TSDSO-24 / Power Switch/Driver 1:8 N-Channel 330mA PG-TSDSO-24-21 RoHS : Compliant |
| 8,347 | ||
| TLE75242-ESD | Infineon Technologies AG | 16 bit Multichannel SPI Switches & Controller RoHS : Compliant |
| 3,000 | ||
| TLE75080ESHXUMA1 | Infineon Technologies AG | IC PWR DRVR N-CHAN 1:8 TSDSO-24 RoHS : Compliant |
| 2,316 | ||
| EP4CE75F23C8N | Altera Corporation | IC FPGA 292 I/O 484FBGA RoHS : Compliant |
| 2,000 | ||
| EP4CE75F23I7N | Altera Corporation | IC FPGA 292 I/O 484FBGA RoHS : Compliant |
| 1,680 | ||
| EP4CE75F29I7N | Intel Corporation | IC FPGA 426 I/O 780FBGA / series Field Programmable Gate Array (FPGA) IC 426 2810880 75408 780-BGA RoHS : Compliant |
| 1,042 | ||
| EP4CE75F23C6 | Altera Corporation | IC FPGA 292 I/O 484FBGA RoHS : Not Compliant |
| 623 | ||
| EP4CE75U19I7N | Intel Corporation | IC FPGA 292 I/O 484UBGA RoHS : Compliant |
| 252 | ||
| TLE75602-ESD | Infineon Technologies AG | Switches & Controller RoHS : Compliant |
| 90 | ||
| EP4CE75F29I7 | Intel Corporation | IC FPGA 426 I/O 780FBGA RoHS : Not Compliant |
| 16 |
| Czy Alldatasheet okazała się pomocna? [ DONATE ] |
O Alldatasheet | Reklama | Kontakt | Polityka prywatności | Link do karty katalogowej | Linki | Lista producentów All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Polish ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Vietnamese
Indian
Mexican
British
New Zealand