P100SLASH2528SLASHB Price, sprzedawcę, Stock

Key Specifications, Antenna Type: RHCP Panel, Polarization: RHCP, Minimum Frequency: 902 MHz, Maximum Frequency: 928 MHz, Connector 1 Polarity: Reverse Polarity, Connector Series: TNC, Connector Gender: Plug, Impedance: 50 Ohm.

1 : $139.99
25 : $134.39
50 : $130.19
100 : $127.39

243

PE7AP1001-3

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 6 GHz, Impedance: 50 Ohm, Power Maximum: 15 Watt, VSWR Maximum: 1.15:1, Attenuation: 3 dB, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Series 2: 4.3-10, Connector Gender 2: Female, Body Material: Aluminum. 3 dB Fixed Attenuator, 4.3-10 Male to 4.3-10 Female Aluminum Body Rated to 15 Watts Up to 6 GHz. PE7AP1001-3 is a fixed 3 dB attenuator from Pasternack. This 3dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 4.3-10 attenuator has a male gender on side 1 and a 4.3-10 female connector on side 2. The Pasternack PE7AP1001-3 3 dB attenuator is rated for up to 6 GHz. Our microwave attenuator is rated to 15 Watts at the stated attenuation value. Our fixed RF attenuator PE7AP1001-3 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 3dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $747.99
10 : $718.07
25 : $688.15

PE73SP1002

Pasternack Enterprises

Key Specifications, Impedance: 50 Ohm, Connector In Series: N, Connector In Gender: Female, Connector Out Series: N, Connector Out Gender: Male, Minimum Frequency: 698 MHz, Maximum Frequency: 2.7 GHz, Maximum Input Power: 500 Watts, Direction: Bidirectional, Throughput Energy: 0.01 uJ. Type N F/M In/Out Bulkhead Coax RF Surge Protector, 698MHz - 2.7GHz, DC Block, 500W, IP67, 40kA, Filter with Bracket., RF coaxial surge protector (sometimes referred to as a lightning arrestor or surge suppressor) PE73SP1002 from Pasternack is in-stock and will ship same business day as it is purchased. This radio frequency coax surge protector suppressor protects against high electromagnetic pulses (EMP) / power surges that are typically caused by lightning or severe electrical changes. Our Type N F/M in/out bulkhead coax RF surge protector, 698MHz - 2.7GHz, DC block, 500W, IP67, 40kA, filter with bracket is typically used with a RF system of one or more components exposed to the outdoors, like an antenna. The coaxial lightning surge arrestor is designed to pass through the desired frequency range while protecting the RF equipment from DC surges. This Pasternack coax surge protector PE73SP1002 is 50 Ohm and has a type N input. The 50 Ohm type N surge protector is a female gender for input and N type in male for output. Our N type F/M surge protectors utilize surge filter protection technology. The frequency range of this surge filter type N F/M lightning surge arrestor is 698 MHz to 2.7 GHz. Power handling maximum of PE73SP1002 is 500 W. The Pasternack 500 Watts type N bulkhead surge suppressor is rated at 0.01 uJ let-through. Additional product specs and CAD drawing with dimensions for this IP 67 female to male bidirectional type N surge protector from Pasternack can be found in the details of the specifications datasheet PDF on this page. Pasternack is a supplier of one of the broadest and deepest inventory of RF, microwave and millimeter wave components available for shipping same business day. Our ISO 9001:2008 registered facilities will ship the coaxial surge protector components from stock the business day of your purchase. Expert technical support and a friendly, knowledgeable sales team are here to help you with your RF requirements. These and many other reasons are why Pasternack is one of the best websites where to find and buy coaxial bidirectional IP 67 N type bulkhead surge protector products.

1 : $241.99
25 : $229.89
50 : $217.79
100 : $208.11

PEANLP1004

Pasternack Enterprises

Key Specifications, Antenna Type: Log Periodic, Polarization: Vertical and Horizontal, Minimum Frequency: 600 MHz, Maximum Frequency: 3.8 GHz, Connector 1 Polarity: Standard, Connector Series: N, Connector Gender: Female, Impedance: 50 Ohm, Nominal Gain: 7 dBi, Maximum Input VSWR: 2.5:1. 600-960 / 1710-2700 / 3300-3800 MHz, 7 / 9 / 11, MIMO Log Periodic Antenna, 2 x N Female Connector., Pasternack’s PEANLP1004 high gain log periodic antenna is designed to operate from 600 to 3800 MHz. With 11 dbi of gain, PEANLP1004 is ideal for boosting 5G, LTE, CMDA, LoRA, IoT, WIFI. The Pasternack log periodic PEANLP1004 can be used for long distance directional communication over a wide range of frequencies. Log periodic antennas from Pasternack function as boosters where the existing cellular signal is weak and needs to reach further distances. The PEANLP1004 has V/H polarization, 85 horizontal beamwidth, and 65 vertical beamwidth for point to point communication. The included mounting brackets allow for either vertical or horizontal mounting configurations. The directional PEANLP1004 antenna has 2 Type N Female connector on a 20 Inches long pigtail. The 11 dBi max gain log periodic PEANLP1004 antenna operates in 5G bands n1, n2, n3, n5, n7, n8, n12, n13, n14, n18, n20, n25, n26, n28, n29, n30, n34, n38, n39, n40, n41, n48, n53, n65, n66, n67, n67, n70, n71, n77, n78, n80, n81, n82, n83, n84, n85, n86, n89, n90, n91, n92, n93, n94, n95, n97, n98. This 600 to 3800 MHz 5G directional log periodic antenna with Type N connector is in stock and ready to ship the same day. Contact Pasternack’s knowledgeable and friendly technical support and sales staff for your answers on antennas or other products.

1 : $572.99
25 : $544.34
50 : $515.69
100 : $492.77

PEWSP1005

Pasternack Enterprises

Key Specifications, Waveguide Size 1: WR-62, Flange Size 1: UG-419/U, Waveguide Size 2: WR-62, Flange Size 2: UG-419/U, Length: 4.25 inches, Frequency, Min: 12.4 GHz, Frequency, Max: 18 GHz. WR-62 Waveguide Pressurizing Section 4.25 Inch Length, UG-419/U Square Cover Flange from 12.4 GHz to 18 GHz. PEWSP1005 62 waveguide section is straight and is 4.25 inches long. This 4.25 inch 62 straight waveguide section from Pasternack is standard and has a UG-419/U flange. Our straight 62 waveguide section with UG-419/U flange has a minimum frequency of 12.4 GHz and a maximum frequency of 18 GHz. 62 waveguide section PEWSP1005 is part of over 40,000 RF, microwave and millimeter wave components. Our standard 62 straight waveguide section will ship same the day as it is purchased worldwide as with our other RF parts.

1 : $492.99
5 : $473.27
10 : $453.55

PE80P1004

Pasternack Enterprises

Key Specifications, Biased Detector or Zero Biased Detector: Power, Layout: Positive Output Slope, Minimum Frequency: 6 GHz, Maximum Frequency: 18 GHz, Detector Polarity: Positive, Voltage Sensitivity, Typ: 0.5 mV/mW, Power, Max Input: 23 Watts, VSWR, Typ: 1.4:1, VSWR, Max: 1.5:1, Connector In Series: Field Replaceable SMA, Connector-In Group (Threaded, Bayonet): Threaded, Connector In Gender: Male, Connector Out Series: Field Replaceable SMA, Connector-Out Group (Threaded, Bayonet): Threaded, Connector Out Gender: Female, Body Material: Aluminum, Min Operating Temperature: -40 deg C, Max Operating Temperature: 85 deg C. 6 GHz to 18 GHz Power Detector, Positive Output Slope, +23 dBm Max Pin, SMA. The Pasternack power detector PE80P1004 is part of our extensive in-stock RF, microwave and millimeter wave components specifically stocked to be readily available for same-day shipment. The Pasternack radio frequency detector is available in a positive output slope power design. This positive RF power detector is manufactured with threaded Field Replaceable SMA male to Field Replaceable SMA female connectors. The Pasternack power detector with Field Replaceable SMA type connector has a maximum tangential sensitivity of dBm. This Field Replaceable SMA male to Field Replaceable SMA female detector comes with a maximum VSWR of 1.5:1. Our positive output slope RF power detector has an aluminum body. The PE80P1004 Field Replaceable SMA power detector has a minimum frequency of 6 GHz and a maximum frequency of 18 GHz. This Field Replaceable SMA coaxial RF power detector has a maximum input power of 23 dBm. Our positive output slope RF power detector is designed to operate at temperatures ranging between -40 to +85 deg C. PE80P1004 coaxial Field Replaceable SMA detector is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. Our RF, microwave and millimeter wave products are part of the broadest selection in the industry. This coaxial power Field Replaceable SMA detector is ready to buy and be shipped worldwide. Our power detector can be bought and shipped worldwide on the same-day as Pasternack's other in-stock RF parts.

1 : $2,010.0
5 : $1,929.6
10 : $1,849.2
25 : $1,768.8

PE80P1007

Pasternack Enterprises

Key Specifications, Biased Detector or Zero Biased Detector: Power, Layout: Negative Output Slope, Minimum Frequency: 10 MHz, Maximum Frequency: 40 GHz, Detector Polarity: Negative, Voltage Sensitivity, Typ: 0.3 mV/mW, Power, Max Input: 23 Watts, VSWR, Typ: 1.5:1, VSWR, Max: 2:1, Connector In Series: Field Replaceable 2.92mm, Connector-In Group (Threaded, Bayonet): Threaded, Connector In Gender: Male, Connector Out Series: Field Replaceable SMA, Connector-Out Group (Threaded, Bayonet): Threaded, Connector Out Gender: Female, Body Material: Aluminum, Min Operating Temperature: -40 deg C, Max Operating Temperature: 85 deg C. 10 MHz to 40 GHz Power Detector, Negative Output Slope, +23 dBm Max Pin, SMA Output. The Pasternack power detector PE80P1007 is part of our extensive in-stock RF, microwave and millimeter wave components specifically stocked to be readily available for same-day shipment. The Pasternack radio frequency detector is available in a negative output slope power design. This negative RF power detector is manufactured with threaded Field Replaceable 2.92mm male to Field Replaceable SMA female connectors. The Pasternack power detector with Field Replaceable 2.92mm type connector has a maximum tangential sensitivity of dBm. This Field Replaceable 2.92mm male to Field Replaceable SMA female detector comes with a maximum VSWR of 2:1. Our negative output slope RF power detector has an aluminum body. The PE80P1007 Field Replaceable 2.92mm power detector has a minimum frequency of 10 MHz and a maximum frequency of 40 GHz. This Field Replaceable 2.92mm coaxial RF power detector has a maximum input power of 23 dBm. Our negative output slope RF power detector is designed to operate at temperatures ranging between -40 to +85 deg C. PE80P1007 coaxial Field Replaceable 2.92mm detector is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. Our RF, microwave and millimeter wave products are part of the broadest selection in the industry. This coaxial power Field Replaceable 2.92mm detector is ready to buy and be shipped worldwide. Our power detector can be bought and shipped worldwide on the same-day as Pasternack's other in-stock RF parts.

1 : $3,890.0
5 : $3,734.4
10 : $3,578.8
25 : $3,423.2

PE2CP1008

Pasternack Enterprises

Key Specifications, Directionality: Dual Directional, Connector Series: N, Connector Gender: Female, Design: Coupler, Minimum Frequency: 80 MHz, Maximum Frequency: 1,000 MHz, Maximum Input Power: 1,000 Watt, Coupling Value: 50 dB. Dual Directional 50 dB N Coupler From 80 MHz to 1,000 MHz Rated To 1000 Watts. RF coupler part number PE2CP1008 from Pasternack is one of over 40,000 RF components available for same day shipping worldwide. This RF coupler is dual directional and is manufactured with N ports. Our dual directional coupler design uses N ports that are female gender and 50 Ohm impedance. The Pasternack dual directional coupler design is rated for a minimum frequency of 80 MHz and a maximum frequency of 1,000 MHz. Dual directional coupler part # PE2CP1008 is constructed with a coupling value of 50 dB and a coupler directivity of 20 dB. This female N dual directional coupler is built with a maximum insertion loss of 0.25 dB and a maximum input power of 1000 watts. Our dual directional coupler design with N connector is rated for a maximum insertion loss of 0.25 dB and a maximum VSWR of 1.3. Additional female N coupler specs for this RF component can be found on its radio frequency dual directional coupler PDF specifications datasheet above. PE2CP1008 dual directional 50 dB N coupler is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack and it can be bought and then shipped worldwide the same-day as with Pasternack's other in-stock RF parts.

1 : $4,380.0
5 : $4,204.8
10 : $4,029.6

PE51MP1008

Pasternack Enterprises

Key Specifications, Antenna Type: Vehicular, Polarization: Linear, Vertical, Minimum Frequency: 440 MHz, Maximum Frequency: 480 MHz, Connector Series: NMO Mount, Impedance: 50 Ohm, Maximum Input VSWR: 2:1.

1 : $124.99
10 : $119.99
25 : $114.99
100 : $109.99

PE2CP1004

Pasternack Enterprises

Key Specifications, Directionality: Dual Directional, Connector Series: SMA, Connector Gender: Female, Design: Coupler, Minimum Frequency: 20 MHz, Maximum Frequency: 1,000 MHz, Maximum Input Power: 200 Watt, Coupling Value: 50 dB. Dual Directional 50 dB SMA Coupler From 20 MHz to 1,000 MHz Rated To 200 Watts. RF coupler part number PE2CP1004 from Pasternack is one of over 40,000 RF components available for same day shipping worldwide. This RF coupler is dual directional and is manufactured with SMA ports. Our dual directional coupler design uses SMA ports that are female gender and 50 Ohm impedance. The Pasternack dual directional coupler design is rated for a minimum frequency of 20 MHz and a maximum frequency of 1,000 MHz. Dual directional coupler part # PE2CP1004 is constructed with a coupling value of 50 dB and a coupler directivity of 20 dB. This female SMA dual directional coupler is built with a maximum insertion loss of 0.35 dB and a maximum input power of 200 watts. Our dual directional coupler design with SMA connector is rated for a maximum insertion loss of 0.35 dB and a maximum VSWR of 1.25. Additional female SMA coupler specs for this RF component can be found on its radio frequency dual directional coupler PDF specifications datasheet above. PE2CP1004 dual directional 50 dB SMA coupler is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack and it can be bought and then shipped worldwide the same-day as with Pasternack's other in-stock RF parts.

1 : $2,820.0
5 : $2,707.2
10 : $2,594.4

PE8DP1007

Pasternack Enterprises

Key Specifications, Filter Impedance: 75 Ohm, LP Passband Frequency, Min: 5 MHz, LP Passband Frequency, Max: 204 MHz, HP Passband Frequency, Min: 258 MHz, HP Passband Frequency, Max: 1.8 GHz, Connector Series: F, Connector Gender: Female, Connector Group: Threaded, Filter Length: 2.933 in, Filter Width: 1.299 in, Filter Height: 0.705 in, LP Return Loss, Min: 14 dB, HP Return Loss, Min: 12 dB, LP Insertion Loss, Max: 1.5 dB, HP Insertion Loss, Max: 1.8 dB. Diplexer 75 Ohm Type F Female, 5 to 204 MHz Low Pass, 258 to 1800 MHz High Pass., The Pasternack PE8DP1007 diplexer with 75 Ohm impedance is a passive RF device that enables frequency-domain multiplexing and covers different low-pass and high-pass frequency bands depending on the end-user applications. This is a 3-port device that has good insertion loss and VSWR performance with one low pass 5 MHz to 204 MHz frequency port, one high pass 258 MHz to 1.8 GHz frequency port, and one common port. Pasternack’s high pass 258 MHz to 1.8 GHz diplexer filter has a threaded type F female connector that is rugged and vibration resistant. The PE8DP1007 threaded type RF diplexer body has a polished surface finish that provides uniformity of surfaces and increases aesthetics. The filter has a 2.933 in length, a 1.299 in width, and a height of 0.705 in making it the best fit for satellite TV and cable TV applications. PE8DP1007 diplexer has a minimum low pass return loss of 14 dB, a minimum high pass return loss of 12 dB, maximum low pass insertion loss of 1.5 dB, and maximum high pass insertion loss of 1.8 dB which indicates that the line is well matched and gives better performance compared to the low-cost options in the market space. The body of this 75 Ohm RF diplexer with F female threaded type connectors is made of zinc. This Pasternack PE8DP1007 RF diplexer with 75 Ohm impedance is in stock and ready to ship the same day you order. Based on your specifications, our expert technical support and highly trained sales team can find the ideal 75 Ohm zinc diplexer with threaded type F female connector.

1 : $141.99
10 : $136.31
25 : $130.63
100 : $124.95

PE3W03264/SP-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Male Right Angle to MCX Plug Right Angle Low Loss Cable 100 CM Length Using LMR-100 Coax with 180 Deg. Clock., Radio frequency assembly SMA male right angle to MCX plug right angle low loss cable 100 cm length using LMR-100 coax with 180 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to MCX plug right angle low loss cable 100 cm length using LMR-100 coax with 180 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a right angle MCX cable connection on the other. Our low loss right angle SMA to right angle MCX cable assembly has a male gender on end 1 and a plug on end 2. PE3W03264/SP-100CM can also be known as a low loss right angle SMA plug to right angle MCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03264/SP-100CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 60 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle SMA male to right angle MCX plug cable has a maximum VSWR of 1.4:1. SMA plug to MCX male cable assembly PE3W03264/SP-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle MCX cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03264/SP-100CM can also be used in the other direction and will be a right angle MCX plug to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to MCX right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to MCX cable assembly for quick shipment worldwide. Variations of SMA and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to MCX low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $93.09
25 : $88.44
50 : $83.78
100 : $80.06

PE51FP1003

Pasternack Enterprises

Key Specifications, Antenna Type: Panel, Polarization: Vertical/Horizontal, Connector 1 Polarity: Standard, Connector Series: N, Connector Gender: Female, Impedance: 50 Ohm, Maximum Input VSWR: 2:1. 2.4/4.9-5.8 GHz High Density 4-Element, Dual Polarized MIMO Flat Panel Antenna. Panel antenna PE51FP1003 from Pasternack (sometimes known as a patch antenna) is part of our extensive in-stock RF directional antenna selection. This multi band panel / patch antenna has a frequency range of 2.4 GHz to 2.5 GHz, 4.9 GHz to 5.85 GHz, and a nominal dBi gain. Our patch panel antenna uses type N female connector and is rated for 50 Watts input. PE51FP1003 radio frequency panel / patch antenna is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our panel aerial can ship worldwide the same day of the purchase as with our other available RF parts.

1 : $415.99
25 : $395.19
50 : $374.39
100 : $357.75

PE2CP1006

Pasternack Enterprises

Key Specifications, Directionality: Dual Directional, Connector Series: SC, Connector Gender: Female, Design: Coupler, Minimum Frequency: 20 MHz, Maximum Frequency: 1,000 MHz, Maximum Input Power: 1,000 Watt, Coupling Value: 50 dB. Dual Directional 50 dB SC Coupler From 20 MHz to 1,000 MHz Rated To 1000 Watts. RF coupler part number PE2CP1006 from Pasternack is one of over 40,000 RF components available for same day shipping worldwide. This RF coupler is dual directional and is manufactured with SC ports. Our dual directional coupler design uses SC ports that are female gender and 50 Ohm impedance. The Pasternack dual directional coupler design is rated for a minimum frequency of 20 MHz and a maximum frequency of 1,000 MHz. Dual directional coupler part # PE2CP1006 is constructed with a coupling value of 50 dB and a coupler directivity of 20 dB. This female SC dual directional coupler is built with a maximum insertion loss of 0.35 dB and a maximum input power of 1000 watts. Our dual directional coupler design with SC connector is rated for a maximum insertion loss of 0.35 dB and a maximum VSWR of 1.25. Additional female SC coupler specs for this RF component can be found on its radio frequency dual directional coupler PDF specifications datasheet above. PE2CP1006 dual directional 50 dB SC coupler is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack and it can be bought and then shipped worldwide the same-day as with Pasternack's other in-stock RF parts.

1 : $2,220.0
5 : $2,131.2
10 : $2,042.4

Relay Specialties

C-106-P100

Custom Connector Corporation

Din-Rail Steel, Zinc Plated; Special

1 : $0.67
5 : $0.58
10 : $0.57
25 : $0.56
50 : $0.55

P1004-17

Littelfuse Inc

SSAC VERSA POTENTIOMETER, 500K

1 : $56.82
5 : $54.98
10 : $53.26
25 : $51.65
50 : $42.61

P1004-95

Littelfuse Inc

SSAC* POTENTIOMETER 100K 10% T

1 : $12.79
5 : $12.38
10 : $11.99
25 : $11.63
50 : $9.59

Teledyne HiRel

CY37064P100-125AXC

Teledyne HiRel

PLD, 64 MACROCELL, ELECTRICALLY ALTERABLE, 150 MHZ TOGGLE SPEED

Venkel Ltd.

HPTF1206-TP-1000BT

VENKEL LTD

High Power Thin Film CR;1206;1/4W;�5PPM;100R;�0.1%
RoHS : Compliant

HPTF1206-TP-1001UT

VENKEL LTD

High Power Thin Film CR;1206;1/4W;�5PPM;1K;�0.01%
RoHS : Compliant

MELFC0204-ZP-1000BT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�5PPM;100R;�0.1%
RoHS : Compliant

MELFC0207-XP-1002CT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�5PPM;10K;�0.25%
RoHS : Compliant

HPTF1210-UP-1000CT

VENKEL LTD

High Power Thin Film CR;1210;1/3W;�5PPM;100R;�0.25%
RoHS : Compliant

HPTF2010-UP-1001CT

VENKEL LTD

High Power Thin Film CR;2010;1/3W;�5PPM;1K;�0.25%
RoHS : Compliant

CRG0402-P-1005FT

VENKEL LTD

RoHS 10/10 Green CR;0402;1/16W;10M;�1%
RoHS : Compliant

MELFC0204-ZP-1003BT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�5PPM;100K;�0.1%
RoHS : Compliant

HPTF0805-RP-1001BT

VENKEL LTD

High Power Thin Film CR;0805;1/8W;�5PPM;1K;�0.1%
RoHS : Compliant

HPTF0805-RP-1002UT

VENKEL LTD

High Power Thin Film CR;0805;1/8W;�5PPM;10K;�0.01%
RoHS : Compliant

HPTF0603-QP-1000DT

VENKEL LTD

High Power Thin Film CR;0603;1/10W;�5PPM;100R;�0.5%
RoHS : Compliant

HPTF1206-TP-1001FT

VENKEL LTD

High Power Thin Film CR;1206;1/4W;�5PPM;1K;�1%
RoHS : Compliant

MELFC0204-TP-1001CT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�5PPM;1K;�0.25%
RoHS : Compliant

MELFC0207-VP-1002CT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�5PPM;10K;�0.25%
RoHS : Compliant

MELFC0207-XP-1003BT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�5PPM;100K;�0.1%
RoHS : Compliant

Vyrian

C48-16R18-11P-100

Bel Fuse

11 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Plug

16,343

NCP1028P100G

onsemi

Switching Regulator, Current-mode, 0.88A, 110kHz Switching Freq-Max, PDIP7
RoHS : Compliant

12,401

ADSP1009SD

Analog Devices Inc

Multiplier Accumulator/Summer, CMOS, CDIP64
RoHS : Not Compliant

11,614

5KP100CA-HRA

Littelfuse Inc

Trans Voltage Suppressor Diode, 5000W, 100V V(RWM), Bidirectional, 1 Element, Silicon
RoHS : Compliant

10,895

DS1230WP-100IND+

Analog Devices Inc

Non-Volatile SRAM Module, 256KX8, 100ns, CMOS
RoHS : Compliant

10,844

RSP-1000-12

Mean Well Enterprises

AC-DC Power Factor Correction Module, 1 Output, 720W, Hybrid

10,743

ADSP1009KG

Analog Devices Inc

Multiplier Accumulator/Summer, CMOS, CPGA68
RoHS : Not Compliant

8,872

NCP1079AAP100G

onsemi

Switching Controller, Current-mode, 110kHz Switching Freq-Max, MOS, PDIP7
RoHS : Compliant

8,191

PMP10055

Texas Instruments

4,779

NCP1079BBP100G

onsemi

Switching Controller, Current-mode, 110kHz Switching Freq-Max, MOS, PDIP7
RoHS : Compliant

4,480

NCP1014AP100G

onsemi

Switching Regulator, Current-mode, 1A, 110kHz Switching Freq-Max, PDIP7
RoHS : Compliant

4,026

NCP1124AP100G

onsemi

Analog Circuit, PDIP7
RoHS : Compliant

2,793

ASGTX-P-10.000MHZ-2

Abracon Corporation

LVPECL Output Clock Oscillator, 10MHz Nom
RoHS : Compliant

634

MSP-1000-12

Mean Well Enterprises

AC-DC Power Factor Correction Module

550

BKP1005HS330-TV

TAIYO YUDEN

Ferrite Chip, 1 Function(s), 1.7A, 2 Pin(s)
RoHS : Compliant

468

Waytek, Inc.

AL-MP-1000-9-C-5M

Advanced Cable Ties Inc

ACT AL-MP-1000-9-C-5M cable tie mounting base is a natural nylon mount designed to anchor cable ties to panels and flat surfaces. It features a square base, four-way tie entry, and a screw-mount style for organized wire routing and harness support in general-purpose installations.

50 : $0.2754
200 : $0.2552
500 : $0.2313
1,000 : $0.2142
5,000 : $0.2038

26,768

AL-MP-1000-0-C-5M

Advanced Cable Ties Inc

ACT AL-MP-1000-0-C-5M cable tie mounting base is a black 1" mount designed to anchor cable ties to panels and flat surfaces. It features a square base, four-way tie entry, and rubber adhesive backing for organized wire routing and harness support in general-purpose installations.

100 : $0.24
200 : $0.2218
500 : $0.2016
1,000 : $0.1865
5,000 : $0.1777

18,000

99502-P1000

FTZ Industries

1-1/2" Battery Terminal Bolt 5/16"-18 Zinc Plated

10 : $0.5759
2 : $0.5446
5 : $0.5258
10 : $0.5039
20 : $0.4852

Win Source Electronics

RK73H1ETTP1001F

KOA Speer Electronics Inc

RES 1K OHM 1% 1/10W 0402
RoHS : Compliant

157,895 : $0.0019
119,050 : $0.0021
90,910 : $0.0022
65,220 : $0.0023
43,480 : $0.0023
17,860 : $0.0028

990,000

DMP1005UFDF-13

Diodes Incorporated

MOSFET P-CH 12V 26A 6UDFN
RoHS : Compliant

540 : $0.5591
430 : $0.5819
335 : $0.6046
235 : $0.65
150 : $0.6728
70 : $0.7182

190,520

CDRH5D28NP-100NC

Sumida Corporation

SMD Power Inductor CDRH5D28
RoHS : Compliant

1,285 : $0.2338
960 : $0.2607
745 : $0.2697
540 : $0.2787
350 : $0.2877
145 : $0.3506

80,000

DS28E01P-100

Maxim Integrated Products

RoHS : Not Compliant

260 : $1.1754
195 : $1.3111
150 : $1.3563
110 : $1.4015
70 : $1.4467
30 : $1.7631

80,000

DS28E01P-100+T&R

Maxim Integrated Products

RoHS : Compliant

260 : $1.1653
210 : $1.2127
160 : $1.2601
115 : $1.3548
75 : $1.4022
35 : $1.4969

79,520

RP100K281B5-TR

Nisshinbo Micro Devices

IC REG LIN 2.85V 200MA DFN1612-4
RoHS : Compliant

700 : $0.5544
565 : $0.5775
435 : $0.6007
300 : $0.6468
195 : $0.6699
95 : $0.716

35,240

TMP100AQDBVRQ1

Texas Instruments

SENSOR DIGITAL -55C-125C SOT23-6
RoHS : Compliant

209 : $1.4372
156 : $1.603
121 : $1.6583
88 : $1.7136
57 : $1.7688
24 : $2.1557

30,000

SP1001-02JTG

Littelfuse Inc

TVS DIODE 5.5VWM 13VC SC703
RoHS : Compliant

760 : $0.397
565 : $0.4428
440 : $0.4581
320 : $0.4733
205 : $0.4886
85 : $0.5955

9,000

CDRH4D22HPNP-100MC

Sumida Corporation

FIXED IND 10UH 1.3A 143.8MOHM SM
RoHS : Compliant

1,260 : $0.2388
940 : $0.2663
730 : $0.2755
530 : $0.2847
345 : $0.2939
140 : $0.3581

8,000

EFM32GG380F1024G-E-QFP100

Silicon Laboratories Inc

IC MCU 32BIT 1MB FLASH 100LQFP / ARM® Cortex®-M3 series Microcontroller IC 32-Bit Single-Core 48MHz 1MB (1M x 8) FLASH 100-LQFP (14x14)
RoHS : Compliant

61 : $5.5385
46 : $6.1776
36 : $6.3906
26 : $6.6036
17 : $6.8167
7 : $8.3078

1,800

ASP1000RMGQW

Richtek Technology Corp

221 : $1.359
165 : $1.5158
128 : $1.5681
93 : $1.6203
60 : $1.6726
25 : $2.0385

1,768

A3P1000-1FGG144M

Microsemi Corporation (now Microchip)

Military ProASIC3/EL Low-Power Flash FPGAs | IC FPGA 97 I/O 144FBGA
RoHS : Compliant

3 : $141.2538
2 : $157.5523
1 : $162.9851

1,660

A3P1000-FGG256