| Zakładka z wyszukiwarką danych komponentów |
|
R11TAJ-R sprzedawcę |
| sprzedawcę | Numer części | Producent | Szczegółowy opis | Price | Qty. BuyNow | |
![]() Avnet Americas | AC1206FR-075R11L | YAGEO Corporation | SMD Chip Resistor, 5.11 Ohm, ? 1%, 250 mW, 1206 [3216 Metric], Thick Film, General Purpose - Tape and Reel (Alt: AC1206FR-075R11L) RoHS : Compliant |
| 345,000 | |
PMEG6020ETR,115![]() | Nexperia | - Tape and Reel (Alt: PMEG6020ETR,115) RoHS : Compliant |
| 117,000 | ||
PMEG6020ER,115![]() | Nexperia | Schottky Rectifier, 60 V, 2 A, Single, SOD-123W, 2 Pins, 530 mV - Tape and Reel (Alt: PMEG6020ER,115) RoHS : Compliant |
| 99,000 | ||
PMEG4010ETR,115![]() | Nexperia | - Tape and Reel (Alt: PMEG4010ETR,115) RoHS : Compliant |
| 51,000 | ||
PTVS5V0S1UR,115![]() | Nexperia | - Tape and Reel (Alt: PTVS5V0S1UR,115) RoHS : Compliant |
| 30,000 | ||
| CRCW04025R11FNED | Vishay Intertechnologies | - Tape and Reel (Alt: CRCW04025R11FNED) RoHS : Compliant |
| 10,000 | ||
| SDR1105-220ML | Bourns Inc | - Tape and Reel (Alt: SDR1105-220ML) RoHS : Not Compliant |
| 8,800 | ||
| IRFR110PBF-BE3 | Vishay Intertechnologies | Power MOSFET, N Channel, 100 V, 4.3 A, 540 MilliOhms, TO-252 (DPAK), 3 Pins, Surface Mount - Tape and Reel (Alt: IRFR110PBF-BE3) RoHS : Compliant |
| 3,000 | ||
PTVS60VS1UR,115![]() | Nexperia | - Tape and Reel (Alt: PTVS60VS1UR,115) RoHS : Compliant |
| 3,000 | ||
| 28R1127-200 | Qnity Laird | Flat Cable Core, 191 Ohm, 30 MHz to 500 MHz, 23.5mm x 1.7mm - Bulk (Alt: 28R1127-200) RoHS : Compliant |
| 1,260 | ||
| 28R1101-000 | Qnity Laird | - Bulk (Alt: 28R1101-000) RoHS : Compliant |
| 324 | ||
| CWR11MC475KB\\TR | Kyocera AVX Components | Surface Mount Tantalum Capacitor, 4.7 uF, 35 V, 2917 [7343-31 Metric], ? 10%, 1.5 Ohm, 320 mA - Custom Tape W/Leader (Alt: CWR11MC475KB\\TR) RoHS : Not Compliant |
| 100 | ||
| AQR113-B0-I | Marvell Technology Group Ltd | SINGLE PORT 10G/5G/2.5G/1G/100M/10M AQRATE PHY (GEN4), 7X11MM PACKAGE, I-TEMP - Bulk (Alt: AQR113-B0-I) RoHS : Not Compliant | 100 | |||
| RWR81S5R11FSB12 | Vishay Intertechnologies | Through Hole Resistor, 5.11 ohm, RWR Series, 1 W, ? 1%, Axial Leaded, Wirewound, ? 50ppm/?C - Bulk (Alt: RWR81S5R11FSB12) RoHS : Not Compliant |
| 20 | ||
| ATWILC3000-MR110UA | Microchip Technology Inc | - Bulk (Alt: ATWILC3000-MR110UA) RoHS : Compliant |
| 16 | ||
![]() Newark | PMEG4010ETR,115![]() | Nexperia | Diode, Schottky, 1A, 40V, Sod123; |Nexperia PMEG4010ETR,115 RoHS : Compliant |
| 9,134 | |
| SDR1105-220ML | Bourns Inc | Power Inductors Smd Power Inductors; |Bourns, Inc. SDR1105-220ML RoHS : Compliant |
| 3,200 | ||
| MF-R110-2 | Bourns Inc | Fuse Res Pptc, 2.2A, 30V, 1.1A; |Bourns, Inc. MF-R110-2 RoHS : Compliant |
| 2,377 | ||
| MF-R110-2 | Bourns Inc | Fuse Res Pptc, 2.2A, 30V, 1.1A; |Bourns, Inc. MF-R110-2 RoHS : Compliant |
| 2,377 | ||
| 4116R-1-100LF | Bourns Inc | Nw Res Fixed, 10R, Isolated, 8Resistors; |Bourns, Inc. 4116R-1-100LF RoHS : Compliant |
| 2,000 | ||
| SDR1105-151KL | Bourns Inc | Surface Mount Power Inductor, Sdr1105 Se; |Bourns, Inc. SDR1105-151KL RoHS : Compliant |
| 1,661 | ||
| SDR1105-151KL | Bourns Inc | Surface Mount Power Inductor, Sdr1105 Se; |Bourns, Inc. SDR1105-151KL RoHS : Compliant |
| 1,661 | ||
| BGT60LTR11SAIPXUMA1 | Infineon Technologies AG | Radar Sensor, Doppler, -10 To 70Deg C; |Infineon Technologies BGT60LTR11SAIPXUMA1 RoHS : Compliant |
| 291 | ||
| BGT60LTR11SAIPXUMA1 | Infineon Technologies AG | Radar Sensor, Doppler, -10 To 70Deg C; |Infineon Technologies BGT60LTR11SAIPXUMA1 RoHS : Compliant |
| 291 | ||
| 1SFA611100R1102 | ABB Low Voltage Products and Systems | Actuator, Pushbutton Switch, Grn; |Abb 1SFA611100R1102 (Alternate Part Number: 7320500261064 RoHS : Compliant |
| 18 | ||
OHD5R-110B![]() | KEMET Corporation | Thermostat Switch, Nc, 110Deg C, Radial; |Kemet OHD5R-110B RoHS : Compliant |
| 8 | ||
| 1SAX351001R1101 | ABB Low Voltage Products and Systems | Relay, Electronic Overload, 54A- 150A; |Abb 1SAX351001R1101 RoHS : Compliant |
| 7 | ||
| 28R1101-000 | Qnity Laird | Ferrite, Core, 23X1.5Mm, 140R, 100Mhz; |Laird 28R1101-000 RoHS : Compliant |
| 4 | ||
| 7TCA083870R1118 | ABB Low Voltage Products and Systems | Sa105-Tinman Solder In Approx 0.20 Kgs; |Abb 7TCA083870R1118 RoHS : Compliant |
| 1 | ||
| DEVR01-5081-S8-1024-R1/1 | DURAKOOL | Durakool Devr01 Hvdc Contactor; |Durakool DEVR01-5081-S8-1024-R1/1 RoHS : Compliant |
| 1 | ||
![]() Analog Devices Inc | ADTR1107-EVALZ | Analog Devices Inc | Front End Module, 6-18 GHz RoHS : Compliant |
| 68 | |
| ADTR1107ACCZ | Analog Devices Inc | Front End Module, 6-18 GHz RoHS : Compliant |
| 0 | ||
| ADTR1107ACCZ-R7 | Analog Devices Inc | Front End Module, 6-18 GHz RoHS : Compliant |
| 0 | ||
![]() RS | 1SSA265203R1100 | TE Connectivity | FIC F ADO 3P/5.08 ADO PLUG, ENTRELEC RoHS : Compliant |
| 400 | |
| RR112-BB-NN (CRR-00000001 | RR112-BB-NN | RR112BBNN) | Carling Technologies | SWITCH, ROCKER, ROUND, NON-ILLUMINATED, 10 AMPS, BLACK ACTUATOR, NO IMPRINTING |
| 281 | ||
| LRR112-1B-JN (LRR-00000008 | LRR112-1B-JN | LRR1121BJN) | Carling Technologies | ROCKER SWITCH, SPDT, ON-NONE-OFF, 125V NEON AMBER, 10A, QC, RR/LRR SERIES |
| 186 | ||
OHD5R-110B![]() | KEMET Corporation | SENSOR, THERMOHD5R 110C 1W BREAK RoHS : Compliant |
| 100 | ||
| CYR 1 1/4 S | Regal Rexnord Corporation | CAM FOLLOWER, CYLINDRICAL STEEL, 1 1/4 IN, 32 MM, LUBRI-DISC SEAL, CYR SERIES |
| 65 | ||
| ILR-11-0001 (ILR1-11-3) | Schurter Electronic Components | ILR1 PULSE TRANSFORMER THT 1A |
| 62 | ||
| LRR112-3B-KN (LRR-00000032 | LRR112-3B-KN | LRR1123BKN) | Carling Technologies | SWITCH ROCKER, ROUND, ILLUMINATED, RR/LRR SERIES |
| 20 | ||
| LRR112-2B-JN (LRR-00000010|LRR112-2B-JN|LRR1122BJN) | Carling Technologies | SWITCH ROCKER, SPDT, ON-NONE-OFF, 125V NEON, RED, 10A, 125VAC, QC, RR/LRR SERIES |
| 18 | ||
| 2TLA050007R1112 | ABB Jokab-Safety | 2TLA EXPLOSION PROOF SOL INTERLOCK SWITCHES, KEY ACTUATOR, POLYESTER, 24V AC/DC |
| 7 | ||
| H7CC-R11D (H7CCR11D) | OMRON Industrial Automation | TACHOMETER, 1-STAGE (1 INPUT/OUTPUT), 12-48VDC, CONTACT OUTPUT SPDT |
| 3 | ||
| H7CC-R11 (H7CCR11) | OMRON Industrial Automation | TACHOMETER, 1-STAGE (1 INPUT/OUTPUT), 100-240VAC, CONTACT OUTPUT SPDT |
| 2 | ||
| QOUR115 | Square D by Schneider Electric | MINIATURE CIRCUIT BREAKER 120/240V 15A |
| 1 | ||
| CE3K1-10R-11 | ABB Low Voltage Products and Systems | 30MM KE-REL RED 1 NO |
| 1 | ||
| BNS008K (BNS 819-X496-99-R-11) | Balluff Inc | SWITCH, MECHANICAL, STYLE 99 EGT, SNAP CONTACT |
| 1 | ||
| E3S-CR11-M1J 0.3M (E3SCR11M1J03M) | OMRON Industrial Automation | DIFFUSE,70M, NPN/PNP, VERT;CONN. |
| 1 | ||
![]() STMicroelectronics | 2STR1160 | STMicroelectronics | Low voltage fast-switching NPN power transistor RoHS : Compliant |
| 42,384 | |
| VIPER114BLSTR | STMicroelectronics | Energy saving off-line high voltage converter |
| 1,962 | ||
| VIPER113BLSTR | STMicroelectronics | Energy saving off-line high voltage converter |
| 1,956 | ||
| VIPER113XSTR | STMicroelectronics | Energy saving off-line high voltage converter RoHS : Compliant |
| 1,696 | ||
| VIPER113LSTR | STMicroelectronics | Energy saving off-line high voltage converter RoHS : Compliant |
| 1,116 | ||
| VIPER115HSTR | STMicroelectronics | Energy saving off-line high voltage converter RoHS : Compliant |
| 113 | ||
| VIPER114XSTR | STMicroelectronics | Energy saving off-line high voltage converter RoHS : Compliant |
| 108 | ||
| VIPER114LSTR | STMicroelectronics | Energy saving off-line high voltage converter RoHS : Compliant |
| 6 | ||
| VIPER114LS | STMicroelectronics | Energy saving off-line high voltage converter |
| 0 | ||
| VIPER114HSTR | STMicroelectronics | Energy saving off-line high voltage converter RoHS : Compliant |
| 0 | ||
| VIPER115LSTR | STMicroelectronics | Energy saving off-line high voltage converter RoHS : Compliant |
| 0 | ||
| VIPER115XSTR | STMicroelectronics | Energy saving off-line high voltage converter RoHS : Compliant |
| 0 | ||
| VIPER115LS | STMicroelectronics | Energy saving off-line high voltage converter |
| 0 | ||
![]() Microchip Technology Inc | AR1100T-I/MQ![]() | Microchip Technology Inc | 4, 5 & 8 wire analog resistive touch controller USB & RS232 communication, QFN, Projected EOL: 2041-08-16 RoHS : Compliant |
| 3,300 | |
AR1100-I/SO![]() | Microchip Technology Inc | 4, 5 & 8 wire analog resistive touch controller USB & RS232 communication, SOIC, Projected EOL: 2041-08-16 RoHS : Compliant |
| 2,926 | ||
| SGR117AT | Microchip Technology Inc | Linear Voltage Regulator - Positive Adjustable Rad Hard, Adjustable, 1.5A, Projected EOL: 2046-01-27 RoHS : Not Compliant |
| 1,868 | ||
| SGR117AIG-883B | Microchip Technology Inc | Linear Voltage Regulator - Positive Adjustable Rad Hard, Adjustable, 1.5A, Projected EOL: 2046-01-27 RoHS : Compliant |
| 506 | ||
| SGR117AK-883B | Microchip Technology Inc | Linear Voltage Regulator - Positive Adjustable Rad Hard, Adjustable, 1.5A, Projected EOL: 2046-01-27 RoHS : Not Compliant |
| 256 | ||
AR1100-I/MQ![]() | Microchip Technology Inc | 4, 5 & 8 wire analog resistive touch controller USB & RS232 communication, QFN, Projected EOL: 2041-08-16 RoHS : Compliant |
| 217 | ||
| SGR117AIG | Microchip Technology Inc | Linear Voltage Regulator - Positive Adjustable Rad Hard, Adjustable, 1.5A, Projected EOL: 2046-01-27 RoHS : Compliant |
| 98 | ||
AR1100-I/SS![]() | Microchip Technology Inc | 4, 5 & 8 wire analog resistive touch controller USB & RS232 communication, SSOP, Projected EOL: 2041-08-16 RoHS : Compliant |
| 84 | ||
AR1100BRD![]() | Microchip Technology Inc | 4, 5 & 8 wire analog resistive touch controller board USB & RS232 communication, MODULE, Projected EOL: 2041-06-27 RoHS : Compliant |
| 74 | ||
| SGR117AT-883B | Microchip Technology Inc | Linear Voltage Regulator - Positive Adjustable Rad Hard, Adjustable, 1.5A, Projected EOL: 2046-01-27 RoHS : Not Compliant |
| 74 | ||
| UTR11 | Microchip Technology Inc | UFR,FRR _ A-Body, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| ATWILC3000-MR110UA | Microchip Technology Inc | SmartConnect WILC3000-MR110UA Module, MODULE, Projected EOL: 2046-10-24 RoHS : Compliant |
| 0 | ||
| ATWILC1000-MR110UB | Microchip Technology Inc | SmartConnect ATWILC1000B-MU-T Module, MODULE, Projected EOL: 2046-03-31 RoHS : Compliant |
| 0 | ||
| ATWILC3000-MR110UA-T | Microchip Technology Inc | SmartConnect WILC3000-MR110UA Module, MODULE, Projected EOL: 2046-03-26 RoHS : Compliant |
| 0 | ||
| ATWILC1000-MR110PB-T | Microchip Technology Inc | SmartConnect ATWILC1000B-MU-T Module, MODULE, Projected EOL: 2046-04-12 RoHS : Compliant |
| 0 | ||
![]() Bisco Industries | WR1-130 | Hutchinson Aerospace & Industry | 608 | |||
| 6035-02BR115 | Stanley Engineered Fastening | 499 | ||||
| R4-EM-R11-161 | Southco | Electronic Rotary Push-to-Close Latch, Auto Relock, With Latch Status Switch Only, Non-sealed Connector, 1/4-20 Thread, Steel, Zinc Plate, Bright chromate Housing |
| 270 | ||
| 12R1-1BB | Camloc Motion Control Ltd | 129 | ||||
| R4-EM-R11-131 | Southco | Electronic Rotary Push-to-Close Latch, Auto Relock, With No Switch, Non-sealed Connector, 1/4-20 Thread, Steel, Zinc Plate, Bright chromate Housing |
| 103 | ||
| TR1-16X16 | MISCELLANEOUS | 78 | ||||
| PR1110 | MISCELLANEOUS | 50 | ||||
| NM-11-R11 | Essentra Components | 31 | ||||
| HCR112-8-8 | MISC. FITTINGS/ELBOWS | 5 | ||||
| NAS1578C3R11 | NAS Bolts | 4 | ||||
| BACR11AW3AD | Boeing | 3 | ||||
| BACR11AW3C | Boeing | 2 | ||||
| GTR112G24NACS1 | MISCELLANEOUS | 2 | ||||
| 820-AR11D | TE Connectivity | 2 | ||||
| 828-AR11D | TE Connectivity | 1 | ||||
![]() Sager | HR11D1A61BR1-11-VA001 | Carling Technologies | Littelfuse HR11D1A61BR111VA001 | 0 | ||
| HR11D1A61BR1-11-SE001 | Carling Technologies | Littelfuse HR11D1A61BR111SE001 | 0 | |||
| HR11D1A11BR1-11-VP001 | Carling Technologies | Littelfuse SWTICH ROCKER | 0 | |||
| HR11D1A11BR1-11-WMRX1 | Carling Technologies | Rocker Switches | 0 | |||
| HR11D1A61BR1-11-00000 | Carling Technologies | Littelfuse HR11D1A61BR11100000 | 0 | |||
| HR11D1A21BR1-11-RX001 | Carling Technologies | Rocker Switches | 0 | |||
| HR11D1A61BR1-11-VC001 | Carling Technologies | Littelfuse HR11D1A61BR111VC001 | 0 | |||
| HR11D1A11GR1-11-00000 | Carling Technologies | Littelfuse HR11D1A11GR11100000 | 0 | |||
| HR11D1A11BR1-11-USRX1 | Carling Technologies | Rocker Switches | 0 | |||
| HR11D1A11BR1-11-TLSC1 | Carling Technologies | Littelfuse HR11D1A11BR111TLSC1 | 0 | |||
| HR11D1A11BR1-11-YKRX1 | Carling Technologies | Rocker Switches | 0 | |||
| HR11D1A51BR1-11-00000 | Carling Technologies | Littelfuse HR11D1A51BR11100000 | 0 | |||
| HR11D1A11BR1-11-NXRX1 | Carling Technologies | Rocker Switches | 0 | |||
| HR11D1A11BR1-11-00000 | Carling Technologies | Littelfuse HR11D1A11BR11100000 | 0 | |||
| HR11D1A11BR1-11-RNRX1 | Carling Technologies | Rocker Switches | 0 | |||
![]() Coilcraft Direct | 0603HP-R11XGRW | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 31,489 | |
| 0603CS-R11XGRW | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 11,065 | ||
| 0603DC-R11XJR | Coilcraft Inc | RF Inductor, ceramic core, 5% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 5,543 | ||
| 0603DC-R11XGR | Coilcraft Inc | RF Inductor, ceramic core, 2% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 3,890 | ||
| 0603DC-R11X | Coilcraft Inc | RF Inductor, ceramic core, 2% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 3,890 | ||
| 0603HP-R11X | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 1,728 | ||
| 0603HP-R11XGEW | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 1,728 | ||
| 0603HP-R11XGE | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 1,728 | ||
| 0603HP-R11XJR | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 1,480 | ||
| 0603HP-R11XJLW | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant |
| 515 | ||
| SLR1190-201KEC | Coilcraft Inc | Power inductor, shielded, 10% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 258 | ||
| 0603CS-R11XJL | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant |
| 106 | ||
| 0603CS-R11XJE | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 106 | ||
| SLR1190-271KEC | Coilcraft Inc | Power inductor, shielded, 10% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 10 | ||
| 0603CS-R11XHRW | Coilcraft Inc | RF inductor, ceramic core, 3% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 0 | ||
![]() Interstate Connecting Components | 28R1101-000 | Qnity Laird | Solid Flat Ribbon RoHS : Compliant |
| 114 | |
| 1SNA120491R1100 | TE Connectivity | DR4/6.1.N RoHS : Compliant |
| 0 | ||
| 1SSA265203R1100 | TE Connectivity | RoHS : Compliant |
| 0 | ||
| 390HS001ZR1106H4 | Glenair Inc | 38999 sIII&IV EMI BS STR SZ11 Al/ZiNi |
| 0 | ||
| 440HJ030ZR1103-K | Glenair Inc | 0 | ||||
| 440HS027ZR1103-2 | Glenair Inc | EMI/RFI BANDING BACKSHELL, SELF-LOCKING | 0 | |||
| 440HS030ZR1103-6 | Glenair Inc | RoHS : Compliant | 0 | |||
| 440HS069ZR1103-2 | Glenair Inc | BANDING CRIMP ADAPTER |
| 0 | ||
| MWDM2L-15SCBRR1-.140 | Glenair Inc | RoHS : Not Compliant | 0 | |||
| MWDM2L-25SCBRR1-.110 | Glenair Inc | RoHS : Not Compliant | 0 | |||
| MWDM2L-9SBR-.110 | Glenair Inc | RoHS : Not Compliant | 0 | |||
| MWDM3L-9SCBR-.110 | Glenair Inc | RoHS : Not Compliant | 0 | |||
| MWDM6L-25PCBR-.110 | Glenair Inc | RoHS : Not Compliant | 0 | |||
| GTR111G16N | Glenair Inc | D52 - CONNECTOR ACCESSORY | 0 | |||
| FR11FP922LM41/AA | Amphenol Positronic | FRS SERIES, CIRCULAR CONN, RFI 9#22, SKT | 0 | |||
![]() NexGen Digital | CLF 2512 470R 1% 100PPM/4 | Microtech GmbH Electronic | 28,000 | |||
| NFM41R11C102T1 | Murata Manufacturing Co Ltd | 7,542 | ||||
| BCR112E6327 | Infineon Technologies AG | RoHS : Compliant | 3,000 | |||
| NFM41R11C223T1 | Murata Manufacturing Co Ltd | 2,337 | ||||
PTVS22VS1UR,115![]() | Nexperia | RoHS : Compliant | 1,530 | |||
| NRC16TR1/10W | Nichicon Corporation | 1,160 | ||||
XTR116U/2K5![]() | Texas Instruments | RoHS : Compliant | 504 | |||
IX6R11S6![]() | IXYS Corporation | RoHS : Compliant | 484 | |||
| BMF-R110 | Bourns Inc | 273 | ||||
| IRFR110 | International Rectifier | RoHS : Not Compliant | 256 | |||
MUR115RL![]() | onsemi | RoHS : Compliant | 250 | |||
| 60R110XU | Littelfuse Inc | RoHS : Compliant | 209 | |||
| MR1122 | Solid State Devices Inc (SSDI) | 19 | ||||
![]() Powell Electronics | FJH-20-R-11.00-4 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 323 | |
| 400R1131-16-0/6/9-9 | TE Connectivity | Connectors RoHS : Not Compliant |
| 253 | ||
| HE1HWPR/11 | Altech Corporation | Eurostrip,11 pole, 8mm spacing |
| 165 | ||
| WTB90PR11SY-11 | AirBorn a molex company | Rectangular PCB Connector |
| 120 | ||
| WTB90PR11SY-48 | AirBorn a molex company | Rectangular PCB Connector |
| 120 | ||
| WG160PR11SY-45 | AirBorn a molex company | Right Angle Cable and Plated Thru Hole P |
| 59 | ||
| WTB100PR11SY-15 | AirBorn a molex company | Right Angle Cable and Plated Thru Hole P |
| 40 | ||
| WTB100PR11SY-60 | AirBorn a molex company | Right Angle Cable and Plated Thru Hole P |
| 40 | ||
| WTB100PR11SY-5 | AirBorn a molex company | Right Angle Cable and Plated Thru Hole P |
| 40 | ||
| WTB120PR11SY-53 | AirBorn a molex company | Right Angle Cable and Plated Thru Hole P |
| 39 | ||
| TR11-D-X-63-BB-2-N-3.0A | Altech Corporation | TR11sup.prot.,wingD,bl.slid.w/ |
| 29 | ||
| MWDM2L-9SBR-.110 | Glenair Inc | MICRO-D CONNECTORS - MICRO-D CONNECTORS RoHS : Not Compliant |
| 10 | ||
| CR1179-000 | TE Connectivity | shrink tube RoHS : Compliant |
| 5 | ||
| FDR1101-26 | Incon Inc | Connector |
| 2 | ||
| R-11479-28 | TE Connectivity | SENSOR R-11479-28 |
| 1 | ||
![]() PUI | 861HSSR115-DD | 8 | ||||
![]() Chip 1 Exchange | PMEG4010ER,115![]() | Nexperia | INSTOCK RoHS : Compliant | 74,777 | ||
| R1/12K | YAGEO Corporation | INSTOCK | 10,000 | |||
| MMA 0207-50 RP 22R11% | Vishay Beyschlag | INSTOCK | 8,000 | |||
GRM188R11H103KA01J![]() | Murata Manufacturing Co Ltd | INSTOCK RoHS : Compliant | 8,000 | |||
| 0603 1% 82R 1/16W | EUROH | INSTOCK | 7,000 | |||
| 0603 1% 150R 1/10 W | EUROH | INSTOCK | 5,000 | |||
| MUR115RLG | INSTOCK | 4,915 | ||||
| NFM40R11C222T1M00-54 | Murata Manufacturing Co Ltd | INSTOCK | 4,000 | |||
| FCR03 1% 200R 1/10W | EUROH | INSTOCK | 3,000 | |||
| TLR113A | Toshiba America Electronic Components | INSTOCK RoHS : Not Compliant | 1,000 | |||
| R1160N121B-F | INSTOCK | 200 | ||||
| BTR11H | Panasonic Electronic Components | INSTOCK | 38 | |||
| AQR113C-B0-C | Marvell Technology Group Ltd | INSTOCK | 5 | |||
| WPER-116GNV2 | INSTOCK | 3 | ||||
| PR11AYO | INSTOCK | 2 | ||||
![]() Avnet Asia | PMEG6010ER,115![]() | Nexperia | Schottky Rectifier, 60 V, 1 A, Single, SOD-123W, 2 Pins, 530 mV (Alt: PMEG6010ER,115) RoHS : Compliant |
| 48,000 | |
PTVS10VS1UR,115![]() | Nexperia | TVS Diode, PTVSxS1UR Series, Unidirectional, 10 V, 17 V, SOD-123, 2 Pins (Alt: PTVS10VS1UR,115) RoHS : Compliant | 45,000 | |||
PTVS6V5S1UR,115![]() | Nexperia | Diode TVS Single Uni-Dir 6.5V 400W 2-Pin SOD-123W T/R (Alt: PTVS6V5S1UR,115) RoHS : Compliant | 18,000 | |||
PTVS13VS1UR,115![]() | Nexperia | TVS Diode, PTVSxS1UR Series, Unidirectional, 13 V, 21.5 V, SOD-123, 2 Pins (Alt: PTVS13VS1UR,115) RoHS : Compliant |
| 15,000 | ||
IP4294CZ10-TBR,115![]() | Nexperia | ESD Protection Device, 4.1 V, SOT-1176-1, 10 Pins, 5.5 V, 0.6 pF (Alt: IP4294CZ10-TBR,115) RoHS : Compliant |
| 15,000 | ||
| R1180N331B-TR-AE | Nisshinbo Micro Devices | LDO Regulator Pos 3.3V 150mA 5-Pin SOT-23 T/R (Alt: R1180N331B-TR-AE) RoHS : Compliant |
| 15,000 | ||
PTVS3V3S1UR,115![]() | Nexperia | TVS Diode, PTVSxS1UR Series, Unidirectional, 3.3 V, 8 V, SOD-123, 2 Pins (Alt: PTVS3V3S1UR,115) RoHS : Compliant |
| 9,000 | ||
PTVS60VS1UTR,115![]() | Nexperia | TVS Diode, PTVSxS1UTR Series, Unidirectional, 60 V, 96.8 V, SOD-123W, 2 Pins (Alt: PTVS60VS1UTR,115) RoHS : Compliant | 9,000 | |||
| TL1211V1-R110-R | Eaton Corporation | (Alt: TL1211V1-R110-R) RoHS : Compliant |
| 7,000 | ||
| FTR-110-03-G-D-06-P-FR | Samtec Inc | (Alt: FTR-110-03-G-D-06-P-FR) RoHS : Compliant |
| 875 | ||
| GH10R11312HR | Amphenol Corporation | MINI COOL EDGE IO 85OHM R/A 38PIN, PCIE GEN6 (Alt: GH10R11312HR) RoHS : Compliant |
| 150 | ||
PMEG4010ETR,115![]() | Nexperia | (Alt: PMEG4010ETR,115) RoHS : Compliant | 0 | |||
PMEG4030ER,115![]() | Nexperia | (Alt: PMEG4030ER,115) RoHS : Compliant |
| 0 | ||
| BT150S-600R,118 | WeEn Semiconductor Co Ltd | Thyristor SCR 600V 38A 3-Pin(2+Tab) DPAK T/R (Alt: BT150S-600R,118) RoHS : Compliant | 0 | |||
PTVS43VS1UR,115![]() | Nexperia | TVS Diode, PTVSxS1UR Series (Alt: PTVS43VS1UR,115) RoHS : Compliant | 0 | |||
![]() DB Roberts | SQR111227A | Essentra Components | 80MM SQR 2.0-4.0 GA TEXTURED I | 0 | ||
| ESR-1-12 | Sugatsune Kogyo Co Ltd | 0 | ||||
| R1185-7 | HeliCoil | R PACK 7/16-14 1-1/2DIA. | 0 | |||
| R4-EM-R11-132 | Southco | R4-EM-R11-132 | 0 | |||
| E5-91-325-RR1-13 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| SQR111202A | Essentra Components | 1-38 SQR 11-19 GA POLISHED INS | 0 | |||
| R1185-6 | HeliCoil | R PACK 3/8-16 1-1/2-DIA. | 0 | |||
| R1191-9 | HeliCoil | R PACK 9 16 18 1 1 2 | 0 | |||
| R4-EM-R11-131 | Southco | 0 | ||||
| RCR111355A | Essentra Components | 25 X 10MM RECT TUBE GLIDE TEXT | 0 | |||
| RCR111481A | Essentra Components | 60 X 30MM RECT TUBE GLIDE POLI | 0 | |||
| RDR111053A | Essentra Components | 0.5 IN ROUND TUBE GLIDE TEXTUR | 0 | |||
| RCR111511A | Essentra Components | 40 X 25MM RECT TUBE GLIDE POLI | 0 | |||
| RCR111548A | Essentra Components | 1.5 X 1.0IN RECT TUBE GLIDE TE | 0 | |||
| RDR111084A | Essentra Components | 1.25 IN ROUND TUBE GLIDE POLIS | 0 | |||
![]() Flip Electronics | MUR110RLG![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 155,000 | |
MUR115RLG![]() | onsemi | Stock RoHS : Compliant | 20,000 | |||
PCA9622DR,118![]() | NXP Semiconductors | Stock RoHS : Compliant | 20,000 | |||
MBR1100RLG![]() | onsemi | Stock, Ship Today RoHS : Compliant | 15,000 | |||
| AFBR-1150L | Broadcom Limited | Stock, Ship Today RoHS : Compliant |
| 8,100 | ||
| S25FL512SAGMFAR11 | Cypress Semiconductor | Stock RoHS : Compliant | 3,686 | |||
| S25FL128SAGMFIR11 | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 1,382 | ||
| S25FL256SAGMFAR11 | Cypress Semiconductor | Stock RoHS : Not Compliant | 1,227 | |||
| IR11662SPBF | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 1,205 | ||
| S25FL512SAGMFVR11 | Cypress Semiconductor | Stock RoHS : Compliant | 1,076 | |||
| S25FL512SAGMFBR11 | Cypress Semiconductor | Stock RoHS : Compliant | 1,076 | |||
| BLF578XR,112 | Flip Electronics Manufacturing Services | Stock, Ship Today | 648 | |||
| BLF178XR,112 | Flip Electronics Manufacturing Services | Stock, Ship Today | 360 | |||
| BLF574XR,112 | Flip Electronics Manufacturing Services | Stock, Ship Today | 334 | |||
| BLA6G1011-200R,112 | Flip Electronics Manufacturing Services | Stock, Ship Today |
| 259 | ||
![]() Master Electronics | HR11D1A61BR1-11-VA001 | Carling Technologies | HR11D1A61BR111VA001 RoHS : Compliant |
| 0 | |
| HR11D1A51BR1-11-VDVF1 | Carling Technologies | HR11D1A51BR111VDVF1 RoHS : Compliant |
| 0 | ||
| HR11D1A61BR1-11-SE001 | Carling Technologies | HR11D1A61BR111SE001 RoHS : Compliant |
| 0 | ||
| HR11D1A11BR1-11-VP001 | Carling Technologies | HR11D1A11BR1-11-VP001 RoHS : Compliant |
| 0 | ||
| HR11D1A11BR1-11-WMRX1 | Carling Technologies | HR11D1A11BR111WMRX1 RoHS : Compliant |
| 0 | ||
| HR11D1A61BR1-11-00000 | Carling Technologies | HR11D1A61BR11100000 RoHS : Compliant |
| 0 | ||
| HR11D1A21BR1-11-RX001 | Carling Technologies | HR11D1A21BR111RX001 RoHS : Compliant |
| 0 | ||
| HR11D1A61BR1-11-VC001 | Carling Technologies | HR11D1A61BR111VC001 RoHS : Compliant |
| 0 | ||
| HR11D1A11GR1-11-00000 | Carling Technologies | HR11D1A11GR11100000 RoHS : Compliant |
| 0 | ||
| HR11D1A11BR1-11-USRX1 | Carling Technologies | HR11D1A11BR111USRX1 RoHS : Compliant |
| 0 | ||
| HR11D1A11BR1-11-TLSC1 | Carling Technologies | HR11D1A11BR111TLSC1 RoHS : Compliant |
| 0 | ||
| HR11D1A11BR1-11-YKRX1 | Carling Technologies | HR11D1A11BR111YKRX1 RoHS : Compliant |
| 0 | ||
| HR11D1A51BR1-11-00000 | Carling Technologies | HR11D1A51BR11100000 RoHS : Compliant |
| 0 | ||
| HR11D1A11BR1-11-NXRX1 | Carling Technologies | HR11D1A11BR111NXRX1 RoHS : Compliant |
| 0 | ||
| HR11D1A11BR1-11-00000 | Carling Technologies | HR11D1A11BR11100000 RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE6TR1135 | Pasternack Enterprises | Key Specifications, Termination Type: RF Load, Connector Series: TNC, Connector Gender: Female, Minimum Frequency: DC, Maximum Frequency: 12.4 GHz, Impedance: 50 Ohm, Maximum VSWR: 1.25:1, Maximum Power: 5 Watt. 5 Watt RF Load (Termination) Up to 12.4 GHz With TNC Female Input Aluminum Body. Pasternack's PE6TR1135 RF load termination (also known as a dummy load) has a TNC female connector. This Pasternack 5 watt TNC female load / termination is rated for a maximum frequency of 12.4 GHz. Our TNC female termination load is a RF load termination with a 50 Ohm impedance. The max input power rating (CW) of this RF termination is 5 Watts. This TNC coax terminator is manufactured with a aluminum housing body. Pasternack's 50 Ohm TNC coaxial termination has a maximum input power of 5 Watts and a maximum VSWR of 1.25:1. Additional TNC female RF load specs for this component can be found on its radio frequency termination load PDF specification datasheet above. Pasternack's PE6TR1135 has a TNC connector and is designed to withstand temperatures between -55 to +85 deg C. This RF load termination has a 5 Watts and a maximum input power and 500 Watts peak power. Our coax termination is suitable for WIFI 6E, 5G cellular bands, SatCom, radar systems, test and measurement, commercial and military communication applications. Pasternack is where to buy a 12.4 GHz RF load/termination for quick shipment worldwide because this is only one of more than a million RF parts/components we have available. Our 5 watt TNC female load termination is one of over 40,000 RF, microwave, and millimeter wave components in-stock at Pasternack. Our TNC female 5 watt termination load will ship worldwide the same day as purchased. |
| 23 | |
| PE6TR1117 | Pasternack Enterprises | Key Specifications, Termination Type: RF Load, Connector Series: Mini SMP, Connector Gender: Female, Minimum Frequency: DC, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Maximum VSWR: 1.15:1, Maximum Power: 1 Watt. 1 Watt RF Load Up to 18 GHz with Mini SMP Female Push-On. PE6TR1117 1 Watts RF load (also known as termination or dummy load) has a Mini SMP connector that is female. This Pasternack 1 watt Mini SMP female load / termination is rated for a maximum frequency of 18 GHz. Our Mini SMP female termination load is a rf load termination with a 50 Ohm impedance. This Mini SMP load / coax terminator is manufactured with no chain and beryllium copper body. Pasternack 50 Ohm Mini SMP coaxial termination / load is RoHS compliant and has an average maximum VSWR of 1.15:1. PE6TR1117 1 watt Mini SMP female load termination is one of over 40,000 RF, microwave and millimeter wave components in-stock at Pasternack. Our Mini SMP female 1 watt termination load will ship worldwide the same day as purchased. |
| 21 | ||
| PE6TR1172C | Pasternack Enterprises | Key Specifications, Termination Type: RF Load, Impedance: 50 Ohm, Maximum Frequency: 18 GHz, Maximum VSWR: 1.2:1, Minimum Frequency: DC, Maximum Power: 2 Watt, Body Material: Stainless Steel, Connector Series: TNC, Connector Gender: Female, Temperature, Max Operating: 70 deg C, Temperature, Min Operating: -55 deg C. 2 Watt RF Load With Chain Up to 18 GHz With TNC Female Input Stainless Steel Body. Pasternack’s PE6TR1172C RF load termination (also known as a dummy load) has a TNC female connector. This Pasternack TNC female load / termination is rated for a maximum frequency of 18 GHz. Our TNC female RF termination comes with a 50 Ohm impedance. The max input power rating (CW) of this RF termination is 2 Watts. Make your online purchase right now to take advantage of our same-day shipping. This TNC terminator is manufactured with a stainless steel body. Pasternack's 50 Ohm TNC coaxial termination has a maximum input power (CW) of 2 Watts and a maximum VSWR of 1.2:1. This RF termination is commonly used to terminate devices such as couplers, circulators, hybrids, and combiners. Our 50 Ohm RF terminator has gasket made from silicone. Additional dimensions and specifications for this RF load termination are on our downloadable PDF datasheet above. Pasternack's PE6TR1172C terminator has a TNC connector and is designed to withstand temperatures between -55 to +70 deg C. Our RF load termination is an indispensable component in many RF, microwave and millimeter wave systems where signal reflection from unused ports can potentially damage the device or reduce signal integrity. This 2 Watts RF termination has a heatsink body that is designed to provide adequate heat dissipation within its full frequency of operation. Our radio frequency termination is suitable for wireless, SatCom, radar systems, test and measurement, commercial and military communications applications. Pasternack is where to buy a 18 GHz RF load/termination for quick shipment worldwide because this is only one of more than a million RF parts/components we have available. Our 2 watt TNC female load termination is one of over 40,000 RF, microwave and millimeter wave components in-stock at Pasternack. Our RF load termination load will ship worldwide the same business day as purchased. |
| 11 | ||
| PE6TR1132 | Pasternack Enterprises | Key Specifications, Termination Type: RF Load, Connector Series: N, Connector Gender: Male, Minimum Frequency: DC, Maximum Frequency: 12.4 GHz, Impedance: 50 Ohm, Maximum VSWR: 1.25:1, Maximum Power: 5 Watt. 5 Watt RF Load (Termination) Up to 12.4 GHz With N Male Input Aluminum Body. Pasternack's PE6TR1132 RF load termination (also known as a dummy load) has a N male connector. This Pasternack 5 watt N male load / termination is rated for a maximum frequency of 12.4 GHz. Our N male termination load is a RF load termination with a 50 Ohm impedance. The max input power rating (CW) of this RF termination is 5 Watts. This N coax terminator is manufactured with a aluminum housing body. Pasternack's 50 Ohm N coaxial termination has a maximum input power of 5 Watts and a maximum VSWR of 1.25:1. Additional N male RF load specs for this component can be found on its radio frequency termination load PDF specification datasheet above. Pasternack's PE6TR1132 has a N connector and is designed to withstand temperatures between -55 to +85 deg C. This RF load termination has a 5 Watts and a maximum input power and 1,000 Watts peak power. Our coax termination is suitable for WIFI 6E, 5G cellular bands, SatCom, radar systems, test and measurement, commercial and military communication applications. Pasternack is where to buy a 12.4 GHz RF load/termination for quick shipment worldwide because this is only one of more than a million RF parts/components we have available. Our 5 watt N male load termination is one of over 40,000 RF, microwave, and millimeter wave components in-stock at Pasternack. Our N male 5 watt termination load will ship worldwide the same day as purchased. |
| 7 | ||
| PE6TR1190 | Pasternack Enterprises | Key Specifications, Termination Type: RF Load, Impedance: 75 Ohm, Maximum Frequency: 12 GHz, Maximum VSWR: 1.25:1, Minimum Frequency: DC, Maximum Power: 2 Watt, Body Material: Brass, Connector Series: BNC, Connector Gender: Male, Temperature, Max Operating: 165 deg C, Temperature, Min Operating: -55 deg C. 2 Watt RF Termination (Load), DC to 12 GHz 75 Ohm BNC Male, Brass., Pasternack’s PE6TR1190 RF load termination (also known as a dummy load) has a BNC male connector. This Pasternack BNC male load/termination is rated for a maximum frequency of 12 GHz. Our BNC male RF termination comes with a 75 Ohm impedance. The maximum input power rating (CW) of this RF termination is 2 Watts. Make your online purchase right now to take advantage of our same-business-day shipping. This BNC terminator is manufactured with a brass housing body. Pasternack’s 75 Ohm BNC coaxial termination has a maximum input power (CW) of 2 Watts and a maximum VSWR of 1.25:1. This termination is commonly used to terminate devices such as couplers, circulators, hybrids and combiners. Additional dimensions and specifications for this RF load termination are on our downloadable PDF datasheet above. Pasternack’s PE6TR1190 terminator is designed to withstand temperatures ranging from -55 to +165 deg C. Our RF load/termination is an indispensable component in many RF, microwave and millimeter wave systems where signal reflection from unused ports can potentially damage the device or reduce signal integrity. Our radio frequency termination is suitable for 8k UHD TV, video distribution and test and measurement applications. Our RF terminator has a beryllium copper inner conductor material with gold over nickel-phosphorus alloy over copper plating. Pasternack is where to buy a high-quality 12 GHz RF load/termination for quick shipment worldwide because this is only one of more than a million RF parts/components we have available. This 2 Watts BNC male load termination is part of over one million RF, microwave and millimeter wave components in stock at Pasternack. Our RF load termination will ship worldwide the same business day as purchased. |
| 7 | ||
| PE6TR1133 | Pasternack Enterprises | Key Specifications, Termination Type: RF Load, Connector Series: N, Connector Gender: Female, Minimum Frequency: DC, Maximum Frequency: 12.4 GHz, Impedance: 50 Ohm, Maximum VSWR: 1.25:1, Maximum Power: 5 Watt. 5 Watt RF Load (Termination) Up to 12.4 GHz With N Female Input Aluminum Body. Pasternack's PE6TR1133 RF load termination (also known as a dummy load) has a N female connector. This Pasternack 5 watt N female load / termination is rated for a maximum frequency of 12.4 GHz. Our N female termination load is a RF load termination with a 50 Ohm impedance. The max input power rating (CW) of this RF termination is 5 Watts. This N coax terminator is manufactured with a aluminum housing body. Pasternack's 50 Ohm N coaxial termination has a maximum input power of 5 Watts and a maximum VSWR of 1.25:1. Additional N female RF load specs for this component can be found on its radio frequency termination load PDF specification datasheet above. Pasternack's PE6TR1133 has a N connector and is designed to withstand temperatures between -55 to +85 deg C. This RF load termination has a 5 Watts and a maximum input power and 1,000 Watts peak power. Our coax termination is suitable for WIFI 6E, 5G cellular bands, SatCom, radar systems, test and measurement, commercial and military communication applications. Pasternack is where to buy a 12.4 GHz RF load/termination for quick shipment worldwide because this is only one of more than a million RF parts/components we have available. Our 5 watt N female load termination is one of over 40,000 RF, microwave, and millimeter wave components in-stock at Pasternack. Our N female 5 watt termination load will ship worldwide the same day as purchased. |
| 5 | ||
| PE6TR1193C | Pasternack Enterprises | Key Specifications, Termination Type: RF Load, Impedance: 75 Ohm, Maximum Frequency: 12 GHz, Maximum VSWR: 1.25:1, Minimum Frequency: DC, Maximum Power: 2 Watt, Body Material: Brass, Connector Series: TNC, Connector Gender: Female, Temperature, Max Operating: 165 deg C, Temperature, Min Operating: -55 deg C. 2 Watt RF Termination (Load), DC to 12 GHz 75 Ohm TNC Female with Chain, Brass., Pasternack’s PE6TR1193C RF load termination (also known as a dummy load) has a TNC female connector. This Pasternack TNC female load/termination is rated for a maximum frequency of 12 GHz. Our TNC female RF termination comes with a 75 Ohm impedance. The maximum input power rating (CW) of this RF termination is 2 Watts. Make your online purchase right now to take advantage of our same-business-day shipping. This TNC terminator comes with a chain and is manufactured with a brass housing body. Pasternack’s 75 Ohm TNC coaxial termination has a maximum input power (CW) of 2 Watts and a maximum VSWR of 1.25:1. This termination is commonly used to terminate devices such as couplers, circulators, hybrids and combiners. Additional dimensions and specifications for this RF load termination are on our downloadable PDF datasheet above. Pasternack’s PE6TR1193C terminator is designed to withstand temperatures ranging from -55 to +165 deg C. Our RF load/termination is an indispensable component in many RF, microwave and millimeter wave systems where signal reflection from unused ports can potentially damage the device or reduce signal integrity. Our radio frequency termination is suitable for 8k UHD TV, video distribution and test and measurement applications. Our RF terminator has a beryllium copper inner conductor material with gold over nickel-phosphorus alloy over copper plating. Pasternack is where to buy a high-quality 12 GHz RF load/termination for quick shipment worldwide because this is only one of more than a million RF parts/components we have available. This 2 Watts TNC female load termination is part of over one million RF, microwave and millimeter wave components in stock at Pasternack. Our RF load termination will ship worldwide the same business day as purchased. |
| 4 | ||
| PE6TR1190C | Pasternack Enterprises | Key Specifications, Termination Type: RF Load, Impedance: 75 Ohm, Maximum Frequency: 12 GHz, Maximum VSWR: 1.25:1, Minimum Frequency: DC, Maximum Power: 2 Watt, Body Material: Brass, Connector Series: BNC, Connector Gender: Male, Temperature, Max Operating: 165 deg C, Temperature, Min Operating: -55 deg C. 2 Watt RF Termination (Load), DC to 12 GHz 75 Ohm BNC Male with Chain, Brass., Pasternack’s PE6TR1190C RF load termination (also known as a dummy load) has a BNC male connector. This Pasternack BNC male load/termination is rated for a maximum frequency of 12 GHz. Our BNC male RF termination comes with a 75 Ohm impedance. The maximum input power rating (CW) of this RF termination is 2 Watts. Make your online purchase right now to take advantage of our same-business-day shipping. This BNC terminator comes with a chain and is manufactured with a brass housing body. Pasternack’s 75 Ohm BNC coaxial termination has a maximum input power (CW) of 2 Watts and a maximum VSWR of 1.25:1. This termination is commonly used to terminate devices such as couplers, circulators, hybrids and combiners. Additional dimensions and specifications for this RF load termination are on our downloadable PDF datasheet above. Pasternack’s PE6TR1190C terminator is designed to withstand temperatures ranging from -55 to +165 deg C. Our RF load/termination is an indispensable component in many RF, microwave and millimeter wave systems where signal reflection from unused ports can potentially damage the device or reduce signal integrity. Our radio frequency termination is suitable for 8k UHD TV, video distribution and test and measurement applications. Our RF terminator has a beryllium copper inner conductor material with gold over nickel-phosphorus alloy over copper plating. Pasternack is where to buy a high-quality 12 GHz RF load/termination for quick shipment worldwide because this is only one of more than a million RF parts/components we have available. This 2 Watts BNC male load termination is part of over one million RF, microwave and millimeter wave components in stock at Pasternack. Our RF load termination will ship worldwide the same business day as purchased. |
| 4 | ||
| PE6TR1108 | Pasternack Enterprises | Key Specifications, Termination Type: RF Load, Connector Series: 2.92mm, Connector Gender: Female, Minimum Frequency: DC, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Maximum VSWR: 1.15:1, Maximum Power: 1 Watt. 1 Watt RF Load Up to 40 GHz with 2.92mm Female. PE6TR1108 1 Watts RF load (also known as termination or dummy load) has a 2.92mm connector that is female. This Pasternack 1 watt 2.92mm female load / termination is rated for a maximum frequency of 40 GHz. Our 2.92mm female termination load is a rf load termination with a 50 Ohm impedance. This 2.92mm load / coax terminator is manufactured with no chain and passivated stainless steel body. Pasternack 50 Ohm 2.92mm coaxial termination / load is RoHS compliant and has an average maximum VSWR of 1.15:1. PE6TR1108 1 watt 2.92mm female load termination is one of over 40,000 RF, microwave and millimeter wave components in-stock at Pasternack. Our 2.92mm female 1 watt termination load will ship worldwide the same day as purchased. |
| 3 | ||
| PE6TR1153 | Pasternack Enterprises | Key Specifications, Termination Type: RF Load, Impedance: 50 Ohm, Maximum Frequency: 6 GHz, Minimum Frequency: 400 MHz, Maximum Power: 100 Watt, Power, Peak: 1,000 Watts, Body Material: Brass, Connector Series: 4.3-10, Connector Gender: Female, Temperature, Max Operating: 75 deg C, Temperature, Min Operating: -40 deg C. Low PIM 100 Watt RF Load 0.4 GHz to 6 GHz with 4.3-10 Female Black Anodized Aluminum. Pasternack's PE6TR1153 RF load termination (also known as a dummy load) has a 4.3-10 female connector. This Pasternack 4.3-10 female load / termination is rated for a frequency range between 400 MHz to 6 GHz. Our 4.3-10 female termination load is a RF load termination with a 50 Ohm impedance. The max input power rating (CW) of this RF termination is 100 Watts. This low PIM RF load termination has a typical PIM performance of 0 dBc. This 4.3-10 terminator is manufactured with a black anodized aluminum heatsink housing body. This connectorized RF termination is commonly used to terminate devices such as couplers, circulators, hybrids and combiners. Additional dimensions and specifications for this RF load termination are on our downloadable PDF datasheet above. Pasternack's PE6TR1153 terminator has a 4.3-10 connector and is designed to withstand temperatures between -40 to +75 deg C. This RF load termination has a 100 Watts and a maximum input power and 1,000 Watts peak power. Our RF load termination is an indispensable component in many RF, microwave and millimeter wave systems where signal reflection from unused ports can potentially damage the device or reduce signal integrity. This 100 Watts RF termination has a heatsink body that is designed to provide adequate heat dissipation within its full frequency of operation. Our radio frequency termination is suitable for wireless, SatCom, test and measurement, commercial and military communication, base station and 4G/AWS/PCS applications. Pasternack is where to buy a 6 GHz RF load/termination for quick shipment worldwide because this is only one of more than a million RF parts/components we have available. Our 100 watt 4.3-10 female load termination is one of over 40,000 RF, microwave and millimeter wave components in-stock at Pasternack. Our 4.3-10 female 100 watt termination load will ship worldwide the same day as purchased. |
| 2 | ||
| PE6TR1154 | Pasternack Enterprises | Key Specifications, Termination Type: RF Load, Impedance: 50 Ohm, Maximum Frequency: 6 GHz, Minimum Frequency: 400 MHz, Maximum Power: 200 Watt, Power, Peak: 2,000 Watts, Body Material: Brass, Connector Series: N, Connector Gender: Female, Temperature, Max Operating: 75 deg C, Temperature, Min Operating: -40 deg C. Low PIM 200 Watt RF Load 0.4 GHz to 6 GHz with N-type Female Black Anodized Aluminum. Pasternack's PE6TR1154 RF load termination (also known as a dummy load) has a N-type female connector. This Pasternack N-type female load / termination is rated for a frequency range between 400 MHz to 6 GHz. Our N-type female termination load is a RF load termination with a 50 Ohm impedance. The max input power rating (CW) of this RF termination is 200 Watts. This low PIM RF load termination has a typical PIM performance of 0 dBc. This N-type terminator is manufactured with a black anodized aluminum heatsink housing body. This connectorized RF termination is commonly used to terminate devices such as couplers, circulators, hybrids and combiners. Additional dimensions and specifications for this RF load termination are on our downloadable PDF datasheet above. Pasternack's PE6TR1154 terminator has a N-type connector and is designed to withstand temperatures between -40 to +75 deg C. This RF load termination has a 200 Watts and a maximum input power and 2,000 Watts peak power. Our RF load termination is an indispensable component in many RF, microwave and millimeter wave systems where signal reflection from unused ports can potentially damage the device or reduce signal integrity. This 200 Watts RF termination has a heatsink body that is designed to provide adequate heat dissipation within its full frequency of operation. Our radio frequency termination is suitable for wireless, SatCom, test and measurement, commercial and military communication, base station and 4G/AWS/PCS applications. Pasternack is where to buy a 6 GHz RF load/termination for quick shipment worldwide because this is only one of more than a million RF parts/components we have available. Our 200 watt N-type female load termination is one of over 40,000 RF, microwave and millimeter wave components in-stock at Pasternack. Our N-type female 200 watt termination load will ship worldwide the same day as purchased. |
| 1 | ||
| PE6TR1109 | Pasternack Enterprises | Key Specifications, Termination Type: RF Load, Connector Series: 3.5mm, Connector Gender: Male, Minimum Frequency: DC, Maximum Frequency: 34.5 GHz, Impedance: 50 Ohm, Maximum VSWR: 1.15:1, Maximum Power: 1 Watt. 1 Watt RF Load Up to 34.5 GHz with 3.5mm Male. PE6TR1109 1 Watts RF load (also known as termination or dummy load) has a 3.5mm connector that is male. This Pasternack 1 watt 3.5mm male load / termination is rated for a maximum frequency of 34.5 GHz. Our 3.5mm male termination load is a rf load termination with a 50 Ohm impedance. This 3.5mm load / coax terminator is manufactured with no chain and passivated stainless steel body. Pasternack 50 Ohm 3.5mm coaxial termination / load is RoHS compliant and has an average maximum VSWR of 1.15:1. PE6TR1109 1 watt 3.5mm male load termination is one of over 40,000 RF, microwave and millimeter wave components in-stock at Pasternack. Our 3.5mm male 1 watt termination load will ship worldwide the same day as purchased. |
| 0 | ||
| PE6TR1180 | Pasternack Enterprises | Key Specifications, Termination Type: RF Load, Impedance: 50 Ohm, Maximum Frequency: 6 GHz, Maximum VSWR: 1.25:1, Minimum Frequency: DC, Maximum Power: 5 Watt, Body Material: Brass, Connector Series: 7/16 DIN, Connector Gender: Male, Temperature, Max Operating: 75 deg C, Temperature, Min Operating: -40 deg C. 5 Watt RF Load (Termination) Up to 6 GHz With 7/16 DIN Male Input Black Anodized Aluminum Body. Pasternack’s PE6TR1180 RF load termination (also known as a dummy load) has a 7/16 DIN male connector. This Pasternack 7/16 DIN male load / termination is rated for a maximum frequency of 6 GHz. Our 7/16 DIN male termination load is a RF load termination with a 50 Ohm impedance. The max input power rating (CW) of this RF termination is 5 Watts. Make your online purchase right now to take advantage of our same-day shipping. This 7/16 DIN terminator is manufactured with a black anodized aluminum housing body. Pasternack's 50 Ohm 7/16 DIN coaxial termination has a maximum input power (CW) of 5 Watts and a maximum VSWR of 1.25:1. This connectorized RF termination is commonly used to terminate devices such as couplers, circulators, hybrids, and combiners. Additional dimensions and specifications for this RF load termination are on our downloadable PDF datasheet above. Pasternack's PE6TR1180 terminator has a 7/16 DIN connector and is designed to withstand temperatures between -40 to +75 deg C. Our RF load termination is an indispensable component in many RF, microwave and millimeter wave systems where signal reflection from unused ports can potentially damage the device or reduce signal integrity. This 5 Watts RF termination has a heatsink body that is designed to provide adequate heat dissipation within its full frequency of operation. Our radio frequency termination is suitable for 5G cellular bands, SatCom, radar systems, test and measurement, commercial and military communication, DAS systems applications. Pasternack is where to buy a 6 GHz RF load/termination for quick shipment worldwide because this is only one of more than a million RF parts/components we have available. Our 5 watt 7/16 DIN male load termination is one of over 40,000 RF, microwave and millimeter wave components in-stock at Pasternack. Our RF load termination load will ship worldwide the same day as purchased. |
| 0 | ||
| PE6TR1175 | Pasternack Enterprises | Key Specifications, Termination Type: RF Load, Impedance: 50 Ohm, Maximum Frequency: 18 GHz, Maximum VSWR: 1.2:1, Minimum Frequency: DC, Maximum Power: 5 Watt, Body Material: Brass, Connector Series: N, Connector Gender: Female, Temperature, Max Operating: 70 deg C, Temperature, Min Operating: -55 deg C. 5 Watt RF Load Up to 18 GHz With N-Type Female Input Brass Body. Pasternack’s PE6TR1175 RF load termination (also known as a dummy load) has a N-type female connector. This Pasternack N-type female load / termination is rated for a maximum frequency of 18 GHz. Our N-type female RF termination comes with a 50 Ohm impedance. The max input power rating (CW) of this RF termination is 5 Watts. Make your online purchase right now to take advantage of our same-day shipping. This N-type terminator is manufactured with a brass body. Pasternack's 50 Ohm N-type coaxial termination has a maximum input power (CW) of 5 Watts and a maximum VSWR of 1.2:1. This RF termination is commonly used to terminate devices such as couplers, circulators, hybrids, and combiners. Additional dimensions and specifications for this RF load termination are on our downloadable PDF datasheet above. Pasternack's PE6TR1175 terminator has a N-type connector and is designed to withstand temperatures between -55 to +70 deg C. Our RF load termination is an indispensable component in many RF, microwave and millimeter wave systems where signal reflection from unused ports can potentially damage the device or reduce signal integrity. This 5 Watts RF termination has a heatsink body that is designed to provide adequate heat dissipation within its full frequency of operation. Our radio frequency termination is suitable for wireless, SatCom, radar systems, test and measurement, commercial and military communications applications. Pasternack is where to buy a 18 GHz RF load/termination for quick shipment worldwide because this is only one of more than a million RF parts/components we have available. Our 5 watt N-type female load termination is one of over 40,000 RF, microwave and millimeter wave components in-stock at Pasternack. Our RF load termination load will ship worldwide the same business day as purchased. |
| 0 | ||
| PE6TR1101 | Pasternack Enterprises | Key Specifications, Termination Type: RF Load, Connector Series: 1.85mm, Connector Gender: Male, Minimum Frequency: DC, Maximum Frequency: 67 GHz, Impedance: 50 Ohm, Maximum VSWR: 1.6:1, Maximum Power: 1 Watt. 1 Watt RF Load with Chain Up to 67 GHz with 1.85mm Male. PE6TR1101 1 Watts RF load (also known as termination or dummy load) has a 1.85mm connector that is male. This Pasternack 1 watt 1.85mm male load / termination is rated for a maximum frequency of 67 GHz. Our 1.85mm male termination load is a rf load termination with a 50 Ohm impedance. This 1.85mm load / coax terminator is manufactured with chain and passivated stainless steel body. Pasternack 50 Ohm 1.85mm coaxial termination / load is RoHS compliant and has an average maximum VSWR of 1.6:1. PE6TR1101 1 watt 1.85mm male load termination is one of over 40,000 RF, microwave and millimeter wave components in-stock at Pasternack. Our 1.85mm male 1 watt termination load will ship worldwide the same day as purchased. |
| 0 |
| Czy Alldatasheet okazała się pomocna? [ DONATE ] |
O Alldatasheet | Reklama | Kontakt | Polityka prywatności | Link do karty katalogowej | Linki | Lista producentów All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |