FS9721_LP3 datasheet(4/39 Pages) FORTUNE

4 / 39 page

FS9721_LP3

Rev. 2.1

4/39

Introduction

FS9721_LP3 is a high performance, low power consumption and 3

3/4 digits (4000 Counts) Analog to

Digital Converter that built-in the microprocessor (ADC+MCU). It includes the 8 bits microprocessor, low

noise and high stability OPAMP, AC rectifier OPAMP, voltage promotion and regulated voltage power, high

regulated bandgap, auto measurement switch and function control circuit, buzzer driver circuit, clock

oscillation circuit, backlight display control circuit, LCD display driver circuit and so on.

With the microprocessor, FS9721_LP3 can process the logic function control via I/O ports, and through

the codes of MEA1〜MEA4 pins, it can assemble various measurement functions, as well as construct fully

auto measurement meter through the code settings. For the settings of Range, Select, Hold, Rel, BLCTR,

Hz/Duty and Reset keys, it can be fulfilled the measurement mode select, function switch, reading hold,

relative value measurement, backlight display, frequency and duty cycle measurement, reset and so on

functions by triggering these keys.

FS9721_LP3 has the serial data output function so that users can connect the meter and the

equipment of computer for recording, analyzing, processing and printing the measuring data.

With regard to the auto power off function, when there is no action within 30 minutes on the switch or

keys of the meter, the system will enter the sleep mode automatically to save the power. In the process of

using the meter, if it is not necessary to power off automatically, the function can also be cancelled in use.

FS9721_LP3 is made by large integrated circuit technology so that rise greatly up the reliability of the

product, and make the design be simple and the volume be small. It takes low power voltage so as to be low

power consumption and is convenient to use the power supply of battery, especially is proper for the use on

the palm mode meter.

FS9721_LP3 is a microprocessor-embedded and multifunctional measuring ADC so that just less

external components added, it can be a high accuracy, lots functions and low cost measuring meter.

Features

2.1

Max. Display: 4000 Counts (3 3/4 digits).

2.2

Conversion Rate: 3 times/sec.

2.3

The Negative Indication: Auto.

2.4

Power Voltage Range: 2.4V〜

〜

〜3.6V.

2.5

Chip Power Consumption: ≤6mW.

2.6

Low Battery Warning: Approx. 2.4V.

2.7

Buzzer Driver Circuit (Frequency is about 2.7kHz).

2.8

RS232 Serial Data Output

2.9

Embedded OPAMP for AC/DC conversion.

2.10 Function Keys: Range, Hold/BLCTR, Rel, Select, Hz/Duty, RS232 and Reset.

2.11 Unit Symbol and Backlight Display.

2.12 Auto Power-off.

Measurable Modes

3.1

DC Voltage: 400.0mV, 4.000V, 40.00V, 400.0V, 1000V.

3.2

AC Voltage: 400.0mV, 4.000V, 40.00V, 400.0V, 1000V.

3.3

DC Current: 400.0μA / 4000μA,40.00mA / 400.0mA,10.00A.

3.4

AC Current: 400.0μA / 4000μA,40.00mA / 400.0mA,10.00A,400.0A / 4000A.

3.5

Resistance: 400.0Ω, 4.000kΩ, 40.00kΩ, 400.0kΩ, 4.000MΩ, 40.00MΩ.

3.6

Capacitance: 51.20nF,512.0nF,5.120μF,51.20μF,100.0μF(15Sec).

3.7

Frequency: 5.120Hz,51.20Hz,512.0Hz,5.120kHz,51.20kHz,512.0kHz,5.120MHz.

3.8

Duty Cycle: 0.1%〜99.9%.

3.9

Diode: 0V〜1.5 V.

3.10 Open-Short Test: Sound when lower than 50Ω.

FS9721_LP3 Arkusz danych(PDF) 4 Page - Fortune Semiconductor Corp.

FS9721_LP3 Arkusz danych(HTML) 4 Page - Fortune Semiconductor Corp.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39

Arkusz danych Pobierz

Link URL