SAMC21 datasheet(36/46 Pages) ATMEL

36 / 46 page

5.2.

Connecting a SAM-ICE to an Xplained Pro Board

Xplained Pro kits featuring a 10-pin 50mil debug connector can use external debug tools like SAM-ICE

™

or Atmel-ICE instead of the built-in EDBG. Devices using SWD interface on-board will have a connector

with the pinout compatible with the Cortex Debug Connector.

You can connect the SAM-ICE to the debug connector on an Xplained Pro using either an Atmel-ICE

adapter, SAM-ICE adapter, or a 10-pin 50-mil header to squid cable. When using a squid cable, see the

table and figures below for how to connect the SAM-ICE to the Xplained Pro board.

Table 5-1. Squid Cable Connections

Squid Cable pin

SAM-ICE pin

1 (VCC)

1 (VTref)

2 (SWDIO/TMS)

7 (TMS)

3 (GND)

4 (GND)

4 (SWCLK/TCK)

9 (TCK)

5 (GND)

6 (GND)

6 (SWO/TDO)

13 (TDO) (1)

7 (Not used)

8 (Not used)

9 (Not used)

10 (RESET)

15 (RESET)

Note:

Optional, if the device has this functionality.

Figure 5-6. SAM-ICE using a Squid Cable

Atmel SAM C21 Xplained Pro [USER GUIDE]

Atmel-42460D-SAM-C21-Xplained-Pro_User Guide-08/2016

SAMC21 Arkusz danych(PDF) 36 Page - ATMEL Corporation