Ver.1.03

DI-16TY-USB

1

Digital Input Terminal for USB2.0

DI-16TY-USB

* Specifications, color and design of the products are subject to

change without notice.

This product is a USB2.0-compatible terminal that expands the

input function of a PC for digital signals. Being bus-powered,

it does not need an external power supply.

DI-16TY-USB has the 16ch of unisolated TTL level input. In

addition, it uses a protection circuit (surge protection) as its

Input circuit as well as an easily-wired terminal connector.

Windows driver is bundled with this product.

Using the dedicated library VI-DAQ makes it possible to create

each application for LabVIEW.

Unisolated TTL level input

DI-16TY-USB has the 16ch of unisolated TTL level input whose

response speed is 200nsec.

Compatible to USB1.1/USB2.0 and not necessary to power

this product externally as the bus power supply is used.

Compatible to USB1.1/USB2.0 and capable to achieve high

speed transfer at HighSpeed (480 Mbps). Not necessary to

power supply this product externally as the bus power of USB

is used.

Surge absorption diodes are built in the input circuit for

surge voltage protection.

DI-16TY-USB has a surge absorption diode connected to the

+5V output pin at each input point to protect against surge

voltages.

Windows compatible driver libraries are attached.

Using the attached driver library API-USBP(WDM) makes it

possible to create applications of Windows. In addition, a

diagnostic program by which the operations of hardware can

be checked is provided.

Terminal connector facilitating wiring

Wiring is easy as the terminal connector (screw type) is used.

LabVIEW is supported by a plug-in of dedicated library

VI-DAQ.

Using the dedicated library VI-DAQ makes it possible to make

a LabVIEW application.

Item

Specifications

Input section

Number of input signal points 16 points (1 common)

Input format

TTL-level input (Negative logic *1)

Input resistance

10kΩ (1 TTL load)

Surge protector

ESD Noise-Clipping Diodes NNCD6.8J (NEC) or equivalent

Response time

200nsec within *2

+5V output section

Output voltage

4.75 - 5.25V

External supply capable

current (Max.)

5VDC 100mA

Surge protector

ESD Noise-Clipping Diodes NNCD6.8J (NEC) or equivalent

USB

Bus specification

USB Specification 2.0/1.1 standard

USB transfer rate

12Mbps (Full-speed), 480Mbps (High-speed) *3

Power supply

Bus power

Common

Connector

14 pin (screw-terminal) plug header

Number of terminals used at

the same time

127 terminals (Max.) *4

Current consumption (Max.)

5VDC 300mA

Operating conditions

0 - 50ºC, 10 - 90%RH (No condensation)

Allowable distance of signal

extension

Approx. 1.5m (depending on wiring environment)

Physical dimensions (mm)

64(W) x 62(D) x 24(H) (exclusive of protrusions)

Weight

70g (Not including the USB cable, attachment)

Attached cable

USB cable 1.8m

Compatible wires

AWG28 - 16

*1

Data “0” and “1” correspond to the High and Low levels, respectively.

*2

Response time of the input/ IC

*3

This depends on the host PC environment used (OS and USB host controller).

*4

As a USB hub is also counted as one device, you cannot just connect 127 USB terminals.

Specification

Features