Eaton

Electronics Division

1000 Eaton Boulevard

Cleveland, OH 44122

United States

Eaton.com/electronics

© 2022 Eaton

All Rights Reserved

Printed in USA

Publication No. ELX1180 BU-ELX22040

June 2022

Technical Data ELX1180

Effective June 2022

MFSA

SMD current sensing resistor-metal foil

Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written

approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used

in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.

Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also

reserves the right to change or update, without notice, any technical information contained in this bulletin.

Eaton is a registered trademark.

All other trademarks are property

of their respective owners.

Follow us on social media to get the

latest product and support information.

t

tP

ts

TC -5°C

Time 25°C to Peak

Time

25°C

Tsmin

Tsmax

TL

TP

Preheat

A

Max. Ramp Up Rate = 3°C/s

Max. Ramp Down Rate = 6°C/s

Profile feature

Lead (Pb) free solder

Preheat and soak • Temperature min. (Tsmin)

150 °C

• Temperature max. (Tsmax)

200 °C

• Time (Tsmin to Tsmax) (ts)

60-150 seconds

Ramp up rate TL to Tp

3 °C/ second max.

Liquidous temperature (Tl)

Time (tL) maintained above T

L

217 °C

60-120 seconds

Peak package body temperature (TP)*

260 °C

Time (tp)* within 5 °C of the specified classification temperature (Tc)

10 seconds*

Ramp-down rate (Tp to TL)

6 °C/ second max.

Time 25 °C to peak temperature

8 minutes max.

* Tolerance for peak profile temperature (Tp) is defined as a supplier minimum and a user maximum.

Manual solder

+350 °C ±10 °C , 3 +1/-0 seconds 1 time (by soldering iron), generally manual, hand soldering is not recommended

Solder reflow profile