SIM800 datasheet(23/380 Pages) SIMCOM

23 / 380 page

Smart Machine Smart Decision

SIM800 Series_AT Command Manual_V1.09

2015-08-03

shall be ignored since it is used for synchronization with PC tool. Only enter AT Command

through serial port after SIM800 Series is powered on and Unsolicited Result Code "RDY"

is received from serial port. If auto-bauding is enabled, the Unsolicited Result Codes

"RDY" and so on are not indicated when you start up the ME, and the "AT" prefix, or

"at" prefix must be set at the beginning of each command line.

All these AT commands can be split into three categories syntactically: "basic", "S parameter",

and "extended". These are as follows:

1.4.1 Basic syntax

These AT commands have the format of "AT<x><n>", or "AT&<x><n>", where "<x>"is the

Command, and "<n>"is/are the argument(s) for that Command. An example of this is "ATE<n>",

which tells the DCE whether received characters should be echoed back to the DTE according to

the value of "<n>". "<n>" is optional and a default will be used if missing.

1.4.2 S Parameter syntax

These AT commands have the format of "ATS<n>=<m>", where "<n>" is the index of the S

default value is assigned.

1.4.3 Extended Syntax

These commands can operate in several modes, as in the following table:

Table 1: Types of AT commands and responses

Test Command

AT+<x>=?

The mobile equipment returns the list of parameters

and value ranges set with the corresponding Write

Command or by internal processes.

Read Command

AT+<x>?

This command returns the currently set value of the

parameter or parameters.

Write Command

AT+<x>=<…>

This command sets the user-definable parameter

values.

Execution Command

AT+<x>

The

execution

command

reads

non-variable

parameters affected by internal processes in the GSM

engine.

1.4.4 Combining AT commands on the same Command line

You can enter several AT commands on the same line. In this case, you do not need to type the

"AT" or "at" prefix before every command. Instead, you only need type "AT" or "at" the

SIM800 Arkusz danych(PDF) 23 Page - SIMCom

SIM800 Arkusz danych(HTML) 23 Page - SIMCom

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Arkusz danych Pobierz

Link URL