HT360 datasheet(34/46 Pages) HANTEK

Numer części	HT360

Szczegółowy opis	Leeb Hardness Tester

PDF	46 Pages

Scroll/Zoom	100%

Producent	HANTEK [Qingdao Hantek Electronic Co., Ltd.]

Strona internetowa	http://www.hantek.com/

Logo

34 / 46 page

Function introduction

HT360 series user manual

Function

Settings

Description

Delete All

- -

Delete all data in ten groups.

Table 52 Storage menu functions

5.5

Information

In the main interface, Pgdn > Info to enter the<Information>interface.

Display the instrument model, serial number, hardware version, software version and

whether Bluetooth printing is supported.

5.6

Calibration

In the main interface, Pgdn >Cal to enter the<Calibrate>interface.

If the instrument is used for the first time or not used for a long time, the instrument and

impact device must be calibrated with a random Leeb hardness block. The number of

measurements is 5, and the displayed value is the average value. Press

adjust.

Press the Save key to complete the calibration, and press the Back key to cancel the

calibration. The calibration range is ±15HL.

5.7

Printing

Only HT360C supports printing.

Figure 5 Printer

HT360 Arkusz danych(PDF) 34 Page - Qingdao Hantek Electronic Co., Ltd.