DATA SHEET

This Data Sheet states AMD’s current technical specifications regarding the Product described herein. This Data

Sheet may be revised by subsequent versions or modifications due to changes in technical specifications.

Publication# 21195

Rev: E Amendment: 5

Issue Date: September 12, 2006

Am29F017D

16 Megabit (2 M x 8-Bit)

CMOS 5.0 Volt-only, Uniform Sector Flash Memory

DISTINCTIVE CHARACTERISTICS

Optimized for memory card applications

— Backwards-compatible with Am29F016C and

Am29F017B

5.0 V

± 10%, single power supply operation

— Minimizes system level power requirements

Manufactured on 0.23 µm process technology

High performance

— Access times as fast as 70 ns

Low power consumption

— 25 mA typical active read current

— 30 mA typical program/erase current

— 1 µA typical standby current (standard access

time to active mode)

Flexible sector architecture

— 32 uniform sectors of 64 Kbytes each

— Any combination of sectors can be erased.

— Supports full chip erase

— Group sector protection:

A hardware method of locking sector groups to

prevent any program or erase operations within

that sector group

Temporary Sector Group Unprotect allows code

changes in previously locked sectors

Embedded Algorithms

— Embedded Erase algorithm automatically

preprograms and erases the entire chip or any

combination of designated sectors

— Embedded Program algorithm automatically

writes and verifies bytes at specified addresses

Unlock Bypass Program Command

— Reduces overall programming time when

issuing multiple program command sequences

Minimum 1,000,000 program/erase cycles per

sector guaranteed

20-year data retention at 125

°C

— Reliable operation for the life of the system

Package options

— 40-pin TSOP

— 48-pin TSOP

Compatible with JEDEC standards

— Pinout and software compatible with

single-power-supply Flash standard

— Superior inadvertent write protection

Data# Polling and toggle bits

— Provides a software method of detecting

program or erase cycle completion

Ready/Busy# output (RY/BY#)

— Provides a hardware method for detecting

program or erase cycle completion

Erase Suspend/Erase Resume

— Suspends a sector erase operation to read data

from, or program data to, a non-erasing sector,

then resumes the erase operation

Hardware reset pin (RESET#)

— Resets internal state machine to the read mode

This product has been retired and is not recommended for designs. Please contact your Spansion representative for alternates. Availability of this document is retained for reference

and historical purposes only.