TSL25403 datasheet(10/38 Pages) OSRAM

10 / 38 page

Datasheet, Public

Page 9

[v2-00] 2022-Dec-05

Document Feedback

TSL2540 − Detailed Description

the final byte the master places an ACK on the bus (9th clock

pulse). Termination of the Read transaction is indicated by a

NACK being placed on the bus by the master, followed by STOP.

The I²C bus protocol was developed by Philips (now NXP). For

a complete description of the I²C protocol, please review the

NXP I²C design specification at:

www.i2c-bus.org/references/

Timing Diagrams

Figure 11:

I²C Timing

Principles of Operation

System State Machine

An internal state machine provides system control of the ALS

and power management features of the device. At power up,

an internal power-on-reset initializes the device and puts it in

a low power Sleep state. When a write on I²C bus to the Enable

state. If PON is disabled, the device will return to the Sleep state

to save power. Otherwise, the device will remain in the Idle state

until the ALS function is enabled. Once enabled, the device will

execute the ALS and Wait states in sequence as indicated in

Figure 12. Upon completion, the device will automatically

begin a new ALS-Wait cycle as long as PON and AEN remain

enabled. If the ALS function generates an interrupt and the

Sleep-After-Interrupt (SAI) feature is enabled, the device will

transition to the Sleep state and remain in a low-power mode

until an I²C command is received clearing the interrupts in the

STATUS register. See Interrupts for additional information.

TSL25403 Arkusz danych(PDF) 10 Page - OSRAM GmbH