ML2002 datasheet(12/13 Pages) MINILOGIC

Numer części	ML2002

Szczegółowy opis	Static/Half Duty LCD COG Driver with Real Time Clock

PDF	13 Pages

Scroll/Zoom	100%

Producent	MINILOGIC [Minilogic Device Corporation Limited]

Strona internetowa	http://www.minilogic.com.hk

Logo

12 / 13 page

P12/13

Preliminary, November 2008

ML2002 Preliminary

1. To ensure the good flip-chip assembly quality, we suggest flip-chip bonding house add a “CHECK”

pin for each COG module as shown on the section of “Application Example”. Pin “LOAD” and Pin

“CHECK” shall be connected together if the flip-chip assembly is in good condition. The measured

resistance between Pin “LOAD” and Pin “CHECK” shall not more than 5 kohm.

2. The resistance of ITO glass shall between 15 ohm/□ to 25 ohm/□.

3. Each Common (ie. COM1A and COM1B) shall not cover more than 2,000 mm2 area. In case the

Viewing area of LCD has to be more than 2,000 mm2, more common output has to be used.

Example :

Note : COM1A and COM1B shall cover half of the Viewing Area (ie. Area = 1,300mm2)

Each Common shall not connect to each other.

Application Note

ML2002 Arkusz danych(PDF) 12 Page - Minilogic Device Corporation Limited