TC4420CAT datasheet(8/20 Pages) MICROCHIP

8 / 20 page

TC4420/TC4429

DS21419C-page 8

 2004 Microchip Technology Inc.

3.0

PIN DESCRIPTIONS

The descriptions of the pins are listed in Table 3-1.

TABLE 3-1:

PIN FUNCTION TABLE

3.1

Supply Input (VDD)

The VDD input is the bias supply for the MOSFET driver

and is rated for 4.5V to 18V with respect to the ground

pins. The VDD input should be bypassed to ground with

a local ceramic capacitor. The value of the capacitor

should be chosen based on the capacitive load that is

being driven. A minimum value of 1.0 µF is suggested.

3.2

Control Input

The MOSFET driver input is a high-impedance,

TTL/CMOS compatible input. The input circuitry of the

TC4420/TC4429 MOSFET driver also has a “speed-

up” capacitor. This helps to decrease the propagation

delay times of the driver. Because of this, input signals

with slow rising or falling edges should not be used, as

this can result in double-pulsing of the MOSFET driver

output.

3.3

CMOS Push-Pull Output

The MOSFET driver output is a low-impedance,

CMOS, push-pull style output capable of driving a

capacitive load with 6.0A peak currents. The MOSFET

driver output is capable of withstanding 1.5A peak

reverse currents of either polarity.

3.4

Ground

The ground pins are the return path for the bias current

and the high peak currents that discharge the load

capacitor. The ground pins should be tied into a ground

plane or have very short traces to the bias supply

source return.

3.5

Exposed Metal Pad

The exposed metal pad of the 6x5 DFN package is not

internally connected to any potential. Therefore, this

pad can be connected to a ground plane or other

copper plane on a printed circuit board (PCB) to aid in

heat removal from the package.

Pin No.

8-Pin CERDIP/

PDIP/SOIC

Pin No.

8-Pin DFN

Pin No.

5-Pin TO-220

Symbol

Description

—

VDD

Supply input, 4.5V to 18V

INPUT

Control input, TTL/CMOS compatible input

—

No Connection

GND

Ground

GND

Ground

OUTPUT

CMOS push-pull output

—

OUTPUT

CMOS push-pull output

VDD

Supply input, 4.5V to 18V

—PAD

—

Exposed Metal Pad

——

TAB

VDD

Metal Tab is at the VDD Potential

TC4420CAT Arkusz danych(PDF) 8 Page - Microchip Technology

TC4420CAT Arkusz danych(HTML) 8 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Arkusz danych Pobierz

Link URL