FS4012D datasheet(67/86 Pages) POSITRONIC

67 / 86 page

4 Higher reliability in harsh environments and repeated

mating cycles.

4 PosiBand crimp contacts do not need to be annealed. Split

tine D-subminiature contacts are commonly annealed at the

crimp barrel, with the possibility of reliability problems at the

contact interface if the annealing is performed incorrectly.

4 Electrical and mechanical function of the contact interface are

separated since the PosiBand contact is a two-piece design.

Contact normal force is provided by the “Posiband spring

member”, which allows higher mechanical reliability. The

electrical continuity path is supported through the base contact, which allows a greater number of electrical

paths on a “micro” level when compared to split tine contact design.

4 Higher reliability at prices comparable to the “split tine” design.

4 PosiBand is protected by US Patent 7,115,002.

For a detailed white paper visit: www.connectpositronic.com/posiband

Legacy “split tine” contact with sleeve

PosiBand spring member

placed on base contact

REMOVABLE CONTACT TECHNICAL CHARACTERISTICS

MECHANICAL CHARACTERISTICS, continued:

SHIELDED:

Insert contact to rear face of insulator,

release from front face of insulator. Size 8

contacts. See page 78 table of cable sizes

for contact termination dimensions.

Durability:

500 cycles minimum.

Vibration:

20g from 10 Hz to 500 Hz.

Shock:

30g-11ms.

AIR LINE COUPLER:

Insert contact to rear face of insulator,

release from front face of insulator.

ELECTRICAL CHARACTERISTICS:

POWER CONTACTS:

For electrical characteristics, see page 4.

HIGH VOLTAGE:

Flash over Voltage:

3600 V r.m.s.

Proof Voltage:

2700 V r.m.s.

Initial Contact Resistance:

0.008 ohms maximum.

SHIELDED:

Initial Contact Resistance:

0.008 ohms maximum.

Nominal Impedance:

50 ohms.

Insertion Loss:

-0.46 dB at 1 GHz

-1.5 dB at 2 GHz

VSWR:

1.15 average at 1 GHz

1.56 average at 2 GHz

Above values measured using frequency domain techniques.

Proof Voltage:

1000 V r.m.s.

OPTIONAL PLATING FINISHES

-14

0.000030 [0.76 µ] gold over nickel by adding

“-14” suffix onto part number. Example:

FC120N4-14.

-15

0.000050 inch [1.27µ] gold over nickel by

adding “-15”. Example: FC120N4-15.

RoHS OPTIONS:

/AA

Environmental Compliance Option:

RoHS compliant can be achieved by

adding “/AA” suffix onto part number.

Examples: FC120N4/AA or for optional

finishes use FC120N4/AA-14.

continued from previous page . . .

What makes Positronic’s

PosiBand ® contact

interface significant?

For information regarding crimp tool and crimping tool techniques, see Application Tools section, page 82.

DIMENSIONS ARE IN INCHES [MILLIMETERS].

ALL DIMENSIONS ARE SUBJECT TO CHANGE.

REMOVABLE CONTACTS

Combo-D

D-Sub

Positronic

connectpositronic.com

FS4012D Arkusz danych(PDF) 67 Page - Positronic.

FS4012D Arkusz danych(HTML) 67 Page - Positronic.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86

Arkusz danych Pobierz

Link URL