AS5510 datasheet(15/31 Pages) AMSOSRAM

15 / 31 page

Page 14

ams Datasheet

Document Feedback

[v1-07] 2015-Feb-27

AS5510 − Detailed Description

Data Valid

The state of the data line represents valid data when, after a

START condition, the data line is stable for the duration of the

HIGH period of the clock signal. The data on the line must be

changed during the LOW period of the clock signal. There is one

clock pulse per bit of data. Each data transfer is initiated with a

START condition and terminated with a STOP condition. The

number of data bytes transferred between START and STOP

conditions are not limited, and are determined by the master

device. The information is transferred byte-wise and each

receiver acknowledges with a ninth bit.

Acknowledge

Each receiving device, when addressed, is obliged to generate

an acknowledge bit after the reception of each byte. The master

device must generate an extra clock pulse that is associated

with this acknowledge bit. A device that acknowledges must

pull down the SDA line during the acknowledge clock pulse in

such a way that the SDA line is stable LOW during the HIGH

period of the acknowledge-related clock pulse. Of course, setup

and hold times must be taken into account. A master must

signal an end of READ access to the slave by not generating an

acknowledge bit on the last byte that has been clocked out of

the slave. In this case, the slave must leave the data line HIGH

to enable the master to generate the STOP condition.

Figure 15:

Data Read (Write Pointer, Then Read) - Slave Receive and Transmit

Depending upon the state of the R/W bit, two types of data

transfer are possible:

Data transfer from a Master Transmitter to a Slave

Receiver.

The first byte transmitted by the master is the slave address,

followed by R/W = 0. Next follows a number of data bytes. The

slave returns an acknowledge bit after each received byte. If the

slave does not understand the command or data it sends a “not

acknowledge”. Data is transferred with the most significant bit

(MSB) first.

...

SDA

SCL

Start

Condition

Stop Condition or

Repeated Start Condition

MSB

R/W

ACK

LSB

ACK

Slave Address

Repeated if more Bytes are transferred

AS5510 Arkusz danych(PDF) 15 Page - ams-OSRAM AG

AS5510 Arkusz danych(HTML) 15 Page - ams-OSRAM AG

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

Arkusz danych Pobierz

Link URL