| Zakładka z wyszukiwarką danych komponentów |
|
L9300 Arkusz danych(PDF) 2 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
L9300 Arkusz danych(HTML) 2 Page - STMicroelectronics |
|
2 / 178 page ![]() 1 Main features details 1.1 Supplies 1.1.1 VDD1 regulator VDD1 is a buck regulator with internal N-ch FET that can provide 6.5 V or 5 V with 3% accuracy. 1.1.2 VDD2 regulator VDD2 is a configurable internal regulator. It can work as tracking regulator (± 20 mV) or linear 5 V regulator (2% accuracy) and can provide up to 200 mA. VDD2 regulator is short to battery protected 1.1.3 VDD3 regulator VDD3 is a linear regulator based on an external pass transistor. The output voltage selection is obtained through an external voltage divider. The accuracy of VDD3 is ± 2%. 1.1.4 VDD4 regulator VDD4 is a linear regulator based on an external pass transistor. The output voltage selection is obtained through an external voltage divider. The accuracy of VDD4 is ± 2%. 1.1.5 TRK 1, 2, 3, 4 TRK1, TRK2, TRK3, TRK4 are 4 additional configurable tracking regulators. The regulators track the TRK_SEL pin voltage with an error of ± 20 mV. The tracking regulator outputs can be configured to be used alternatively as wheel speed interfaces. 1.2 Valve drivers 1.2.1 Current controlled channels The device provides 6 current controlled channels. Each channel is based on a LS/HS driver structure. The device is able to work as low–side driver (with high–side active freewheeling) or as high–side driver (with low–side active freewheeling). 1.3 Others 1.3.1 High–side pre-driver The device provides 2 High–side pre-drivers, and one of them is able to work in PWM mode up to roughly 18 kHz. 1.3.2 Watchdog Watchdog functionality to monitor CPU activity. 1.3.3 CAN The device includes a CAN interface. 1.3.4 RESET The device includes two Reset pins. Both of them can be used as output while one of them can be used also as input. 1.3.5 GPO The device provides a low–side open drain general purpose output. This output can be used as a standard low– side output or as a configurable interrupt generator through a dedicated SPI bit in the Service Enable register. L9300 Main features details DS12258 - Rev 5 page 2/178 |
|
Link URL |
| Czy Alldatasheet okazała się pomocna? [ DONATE ] |
O Alldatasheet | Reklama | Kontakt | Polityka prywatności | Link do karty katalogowej | Linki | Lista producentów All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |