7 of 18
RF5146
Rev A1 DS050928
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com.
Pin
Function
Description
Interface Schematic
1NC
Internal circuit node. Do not externally connect.
2VCC2 GSM
Controlled voltage input to the GSM driver stage. This voltage is part of the
power control function for the module. This node must be connected to
VCC OUT. This pin should be externally decoupled.
3NC
Internal circuit node. Do not externally connect.
4GND
Internally connected to the package base.
5GND
Internally connected to the package base.
6
GSM850/
GSM900 OUT
RF output for the GSM bands. This is a 50
Ω output. The output matching
circuit and DC-block are internal to the package.
7GND
Internally connected to the package base.
8NC
Internal circuit node. Do not externally connect.
9NC
Internal circuit node. Do not externally connect.
10
NC
Internal circuit node. Do not externally connect.
11
NC
Internal circuit node. Do not externally connect.
12
NC
Internal circuit node. Do not externally connect.
13
NC
No internal or external connection.
14
NC
Internal circuit node. Do not externally connect.
15
NC
Internal circuit node. Do not externally connect.
16
NC
Internal circuit node. Do not externally connect.
17
NC
Internal circuit node. Do not externally connect.
18
VCC3 GSM
Controlled voltage input to the GSM output stage. This voltage is part of the
power control function for the module. This node must be connected to
VCC OUT. This pin should be externally decoupled.
19
VCC OUT
Controlled voltage output to feed VCC2 and VCC3. This voltage is part of
the power control function for the module. It cannot be connected to any
pins other than VCC2 and VCC3.
20
VCC OUT
Controlled voltage output to feed VCC2 and VCC3. This voltage is part of
the power control function for the module. It cannot be connected to any
pins other than VCC2 and VCC3.
21
VCC3
DCS/PCS
Controlled voltage input to the DCS/PCS output stage. This voltage is part
of the power control function for the module. This node must be connected
to VCC OUT. This pin should be externally decoupled.
See pin 18.
22
NC
Internal circuit node. Do not externally connect.
23
NC
Internal circuit node. Do not externally connect.
24
NC
No internal or external connection.
25
NC
Internal circuit node. Do not externally connect.
26
NC
Internal circuit node. Do not externally connect.
27
NC
Internal circuit node. Do not externally connect.
28
NC
Internal circuit node. Do not externally connect.
29
NC
Internal circuit node. Do not externally connect.
30
GND
Internally connected to the package base.
V CC2
VCC3
RF OUT
Output
Match
V CC3
Polish ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
