CSG14K_CSG8K datasheet(24/114 Pages) AMSOSRAM

Numer części	CSG14K_CSG8K

Szczegółowy opis	13.8 Mp_8.3 Mp High Speed Global Shutter CMOS Image Sensor

PDF	114 Pages

Scroll/Zoom	100%

Producent	AMSOSRAM [ams-OSRAM AG]

Strona internetowa	https://ams-osram.com/

Logo

24 / 114 page

Document Feedback

CSG14K_CSG8K

Functional Description

Datasheet

• PUBLIC

DS000571

• v2-01 • 2023-Feb-10

113

│ 23

Internally, the supply regulators are not connected to the actual image sensor. Connections

have to be made on PCB level (from a Vxx_H/L_OUT pin to a Vxx_H/L_IN pin). In addition,

each supply regulator requires to be decoupled by a 10 µF and 100 nF capacitor.

ams OSRAM recommends to use at least X7R-rated ceramic capacitors.

To obtain an accurate bias reference in the sensor, an external bias resistor of 15.2 k

Ω must

be placed between BIAS_IDAC_RES and ground. It is advised to use a low tolerance (± 1%)

and low temperature coefficient (50 ppm/°C or better).

Next figure shows the positive and negative voltage regulator as well as the bias connections.

Figure 15:

On-Chip Regulators Connection Diagram

After power-up of the sensor, the recommended register settings will set the correct supply

levels for these regulators. Figure 15 gives an overview of the available supply regulators, the

connection to the bias pin and the required voltage on that pin.

CSG14K_CSG8K Arkusz danych(PDF) 24 Page - ams-OSRAM AG