ICS8524 datasheet(8/17 Pages) IDT

Numer części	ICS8524

Szczegółowy opis	LOW SKEW, 1-TO-22 DIFFERENTIAL-TO-HSTL FANOUT BUFFER

PDF	17 Pages

Scroll/Zoom	100%

Producent	IDT [Integrated Device Technology]

Strona internetowa	http://www.idt.com

Logo

8 / 17 page

8524AY

www.icst.com/products/hiperclocks.html

REV. B AUGUST 1, 2007

ICS8524

LOW SKEW, 1-TO-22

DIFFERENTIAL-TO-HSTL FANOUT BUFFER

APPLICATION INFORMATION

Figure 2 shows how the differential input can be wired to accept

single ended levels. The reference voltage V_REF = V

DD/2 is

generated by the bias resistors R1, R2 and C1. This bias circuit

should be located as close as possible to the input pin. The ratio

FIGURE 2. SINGLE ENDED SIGNAL DRIVING DIFFERENTIAL INPUT

CLK_IN

0.1uF

V_REF

WIRING THE DIFFERENTIAL INPUT TO ACCEPT SINGLE ENDED LEVELS

of R1 and R2 might need to be adjusted to position the V_REF in

the center of the input voltage swing. For example, if the input

clock swing is only 2.5V and V

DD = 3.3V, V_REF should be 1.25V

and R2/R1 = 0.609.

ICS8524 Arkusz danych(PDF) 8 Page - Integrated Device Technology