AXK7L, 8L

ORDERING INFORMATION

Mated height

<Socket>

2: For mated height 0.9 mm

<Header>

1: For mated height 0.9 mm

Surface treatment (Contact portion / Terminal portion)

Note 2

<Socket>

7: Ni plating on base, Au plating on surface (for Ni barrier available)

<Header>

5: Ni plating on base, Au plating on surface

Other specifications

<Header>

B: Soldering terminals with fork type terminal

Note 1

Number of contacts (2 digits)

Packing

G: 3,000 pieces embossed tape and plastic reel

× 2

Notes: 1. “B” in the 11th digit of the header part number signifies a fork type soldering terminals to lessen the constraint on amount of solder when mounting,

and a construction that makes it difficult when mounting for excess solder to interfere with the socket.

Although compatible with the previous parts, these parts are not compatible with the recommended PC board pattern and recommended metal mask pattern.

2. The part number will be changed as follows due to the change in the plating specifications for the metal clips.

This change will apply to production from December 2009 onwards. (There will be no change to the contact portion and terminal portion.)

(Socket)

3: Ni plating on base, Au plating on surface (for Ni barrier available)

(Header)

4: Ni plating on base, Au plating on surface

AXK: Narrow Pitch Connector Series

Series name;

7L: F4 (0.4 mm pitch) Socket

8L: F4 (0.4 mm pitch) Header

Functions

2: Without positioning bosses

AXK

G

panasonic-electric-works.net/ac