AOB290L datasheet(2/6 Pages) AOSMD

2 / 6 page

AOT290L/AOB290L

Symbol

Min

Typ

Max

Units

BVDSS

100

VDS=100V, VGS=0V

TJ=55°C

IGSS

100

VGS(th)

Gate Threshold Voltage

2.9

3.5

4.1

ID(ON)

500

2.7

3.5

TJ=125°C

4.4

5.7

VGS=10V, ID=20A

TO263

gFS

VSD

0.67

140

Ciss

7180

9550

Coss

2780

3700

Crss

1.7

Ω

Qg(10V)

126

Qgs

Qgd

tD(on)

tD(off)

trr

Qrr

460

644

THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL

COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING

OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN,

FUNCTIONS AND RELIABILITY WITHOUT NOTICE.

RDS(ON)

Static Drain-Source On-Resistance

Body Diode Reverse Recovery Time

Drain-Source Breakdown Voltage

On state drain current

ID=250µA, VGS=0V

VGS=10V, VDS=5V

SWITCHING PARAMETERS

IDSS

µA

Electrical Characteristics (TJ=25°C unless otherwise noted)

STATIC PARAMETERS

Parameter

Conditions

VDS=VGS ID=250µA

VDS=0V, VGS= ±20V

Zero Gate Voltage Drain Current

Gate-Body leakage current

Forward Transconductance

Diode Forward Voltage

VGS=10V, ID=20A

Maximum Body-Diode Continuous Current

TO220

IS=1A,VGS=0V

VDS=5V, ID=20A

3.2

2.5

Ω

Body Diode Reverse Recovery Charge IF=20A, dI/dt=500A/µs

Input Capacitance

Output Capacitance

Turn-On DelayTime

Gate Drain Charge

Reverse Transfer Capacitance

IF=20A, dI/dt=500A/µs

VGS=0V, VDS=50V, f=1MHz

DYNAMIC PARAMETERS

Turn-On Rise Time

Turn-Off DelayTime

VGS=10V, VDS=50V, RL=2.5Ω,

RGEN=3Ω

Gate resistance

VGS=0V, VDS=0V, f=1MHz

Turn-Off Fall Time

Total Gate Charge

VGS=10V, VDS=50V, ID=20A

Gate Source Charge

A. The value of RθJA is measured with the device mounted on 1in

2 FR-4 board with 2oz. Copper, in a still air environment with T

A =25°C. The

Power dissipation PDSM is based on R θJA and the maximum allowed junction temperature of 150°C. The value in any given application

depends on the user's specific board design, and the maximum temperature of 175°C may be used if the P CB allows it.

B. The power dissipation PD is based on TJ(MAX)=175°C, using junction-to-case thermal resistance, and is more useful in setting the upper

dissipation limit for cases where additional heatsinking is used.

C. Repetitive rating, pulse width limited by junction temperature TJ(MAX)=175°C. Ratings are based on low frequency and duty cycles to keep

initial TJ =25°C.

D. The RθJA is the sum of the thermal impedance from junction to case RθJC and case to ambient.

E. The static characteristics in Figures 1 to 6 are obtained using <300

µs pulses, duty cycle 0.5% max.

F. These curves are based on the junction-to-case thermal impedance which is measured with the device mounted to a large heatsink,

assuming a maximum junction temperature of TJ(MAX)=175°C. The SOA curve provides a single pulse ratin g.

G. The maximum current limited by package is 120A.

H. These tests are performed with the device mounted on 1 in

2 FR-4 board with 2oz. Copper, in a still air environment with T

A=25°C.

Rev3 : Sep 2011

www.aosmd.com

Page 2 of 6

AOB290L Arkusz danych(PDF) 2 Page - Alpha & Omega Semiconductors

AOB290L Arkusz danych(HTML) 2 Page - Alpha & Omega Semiconductors

Html Pages

1 2 3 4 5 6

Arkusz danych Pobierz

Link URL