DOC7707 datasheet(86/307 Pages) ETC1

86 / 307 page

7707F–AVR–11/10

AT90USB82/162

12.0.3

External Interrupt Mask Register – EIMSK

• Bits 7..0 – INT7 – INT0: External Interrupt Request 7 - 0 Enable

When an INT7 – INT0 bit is written to one and the I-bit in the Status Register (SREG) is set

(one), the corresponding external pin interrupt is enabled. The Interrupt Sense Control bits in the

External Interrupt Control Registers – EICRA and EICRB – defines whether the external inter-

rupt is activated on rising or falling edge or level sensed. Activity on any of these pins will trigger

an interrupt request even if the pin is enabled as an output. This provides a way of generating a

software interrupt.

12.0.4

External Interrupt Flag Register – EIFR

• Bits 7..0 – INTF7 - INTF0: External Interrupt Flags 7 - 0

When an edge or logic change on the INT7:0 pin triggers an interrupt request, INTF7:0 becomes

set (one). If the I-bit in SREG and the corresponding interrupt enable bit, INT7:0 in EIMSK, are

set (one), the MCU will jump to the interrupt vector. The flag is cleared when the interrupt routine

is executed. Alternatively, the flag can be cleared by writing a logical one to it. These flags are

always cleared when INT7:0 are configured as level interrupt. Note that when entering sleep

mode with the INT3:0 interrupts disabled, the input buffers on these pins will be disabled. This

may cause a logic change in internal signals which will set the INTF3:0 flags. See “Digital Input

Enable and Sleep Modes” on page 71 for more information.

12.0.5

Pin Change Interrupt Control Register - PCICR

• Bit 1..0 – PCIE1- PCIE0: Pin Change Interrupt Enable 1-0

When the PCIE1/0 bit is set (one) and the I-bit in the Status Register (SREG) is set (one),

Pin Change interrupt 1/0 is enabled. Any change on any enabled PCINT12..8/7..0 pin will

cause an interrupt. The corresponding interrupt of Pin Change Interrupt Request is exe-

cuted from the PCI1/0 Interrupt Vector. PCINT12..8/7..0 pins are enabled individually by the

PCMSK1/0 Register.

12.0.6

Pin Change Interrupt Flag Register – PCIFR

• Bit 1..0 – PCIF1- PCIF0: Pin Change Interrupt Flag 1-0

Bit

7654

INT7

INT6

INT5

INT4

INT3

INT2

INT1

IINT0

EIMSK

Read/Write

R/WR/W

Initial Value

0000

Bit

7654

INTF7

INTF6

INTF5

INTF4

INTF3

INTF2

INTF1

INTF0

EIFR

Read/Write

R/WR/W

Initial Value

0000

Bit

7654

3210

–

PCIE1

PCIE0

PCICR

Read/Write

RRRR

RRR/W

R/W

Initial Value

0000

Bit

7654

3210

–

PCIF1

PCIF0

PCIFR

Read/Write

RRRR

RRR/W

R/W

Initial Value

0000

DOC7707 Arkusz danych(PDF) 86 Page - List of Unclassifed Manufacturers

DOC7707 Arkusz danych(HTML) 86 Page - List of Unclassifed Manufacturers

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Arkusz danych Pobierz

Link URL