M41T00 audio section specifications

AN2583

16/18

3

M41T00 audio section specifications

In summary, the audio section of the M41T00AUD uses a bridged amplifier output stage

which can deliver 300 mW into an 8 ohm load. The device produces less than 2% total

harmonic distortion at this output level, typically 0.2%.

20 k and C = 0.1 uF, the input will be attenuated below 80 Hz. The low pass filter after the

input amplifier will attenuate signals above 8 kHz thus forming a band pass of 80 – 8000 Hz.

The end-to-end gain is controlled by the input and feedback resistors along with the

+12 dB. Lastly, with a PSRR of –55 dB, any noise present on the power supply will be

reduced by at least 55 dB at the output.