1

TECHNICAL DATA SHEET

Low Loss 9 dB 7/16 DIN Unequal Tapper Optimized For Mobile Networks From 380 MHz to 6 GHz Rated

To 300 Watts

Pasternack’s Line of High Power Wideband Tappers have been designed to maintain a Split Ratio across all frequencies

between 380MHz and 6Ghz. There is minimal Insertion Loss, VSWR, and Low PIM. Mechanically the parts have no

solder joints inside the Aluminum Casing and are IP65 / IP67 rated allowing for placement in rugged environments. This

setup along with select bands optimization makes them ideal for Mobile Networks Infrastructure.

• Split Ratios Ranging from 1:3 to 1:1000

• Power Ratings up to 300 Watts

• Low PIM (150dBc) Low VSWR (1.15)

• Rugged Designs available with optional mounting brackets

Configuration

Design

Low Loss Tapper

Frequency Range, GHz

0.38 to 6

Input

7/16 DIN Female

Output

7/16 DIN Female

Sample Port

7/16 DIN Female

Number of Output Ports

2

Housing Material and Plating

Passivated Aluminum

Electrical Specifications

Split Ratio

1:7

Number of Bands

4

Impedance, Ohms

50

Maximum Insertion Loss, dB *

0.75

Maximum Input Power, Watts

300

Maximum Input VSWR

1.3:1

Peak Input Power, KWatts

3

Passive Intermodulation (2 x 43 dBm), dBc

150

Band 1

Frequency, GHz

0.38 to 1.55

Coupling Tolerance, dB

0.5

VSWR

1.2

Band 2

Frequency, GHz

1.65 to 2.7

Coupling Tolerance, dB

0.5

VSWR

1.2:1

Band 3

Frequency, GHz

3.4 to 4.5

Coupling Tolerance, dB

1

VSWR

1.3:1

Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,

inventoryandcertifications: Low Loss 9 dB 7/16 DIN Unequal Tapper Optimized For Mobile Networks From 380 MHz to

6 GHz Rated To 300 Watts PE-T2002

PE-T2002

PE-T2002 REV 1.0

Low Loss 9 dB 7/16 DIN Unequal Tapper Optimized For Mobile

Networks From 380 MHz to 6 GHz Rated To 300 Watts