YMF754-R datasheet(31/60 Pages) YAMAHA

31 / 60 page

YMF754

June 28, 1999

-31-

2. ISA Compatible Device

DS-1E contains the following functions to maintain the compatibility with the past ISA Sound Devices.

These devices are considered Legacy devices and the functions are referred to as Legacy Audio.

Legacy Audio is independent from PCI Audio and can be used simultaneously.

The configuration is set in the Legacy Audio Control Register in the PCI Configuration Register space.

Basically, these registers are configured by the BIOS.

Also, logical device IDs are assigned to the devices to support Plug and Play.

Yamaha defines the following

logical IDs.

To control the device with the BIOS, the logical device IDs must be defined in the PnP BIOS extended ROM

space.

The logical IDs are determined by how it is configured.

IDs and configuration are as follows.

Functions used (Block)

Logical Device ID

(*)

MPU401

SB Pro

(*)

Joystick

YMH0100

YMH0101

YMH0102

YMH0103

YMH010A

* The blocks pertain to the following.

FM:

Points to the FM synthesizer mapped to AdLibBase (0x0388).

SB Pro:

Points to the Voice Playback section only.

These devices are independent from each other, and can be Enabled/Disabled individually.

However, both

AdLib and Sound Blaster must be disabled to disable the internal FM Synthesizer.

Disabling just AdLib

only masks the access.

The driver by Yamaha supports logical device ID, YMH0100, YMH0102, YMH0103 and YMH010A.

For YMH0101, use the driver provided by Microsoft.

YMF754-R Arkusz danych(PDF) 31 Page - YAMAHA CORPORATION