| Zakładka z wyszukiwarką danych komponentów |
|
LM93 Arkusz danych(PDF) 79 Page - National Semiconductor (TI) |
|
|
|
|||||||||||||||||||||||||||||
LM93 Arkusz danych(HTML) 79 Page - National Semiconductor (TI) |
|
79 / 92 page ![]() 16.0 Registers (Continued) 16.8.25 Register E3h LM93 Configuration Register Address Read/ Write Register Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Default Value E3h R/W LM93 Configuration READY RES P1P2_ PROCHOT ALERT _EN GMSK LOCK START 00h Lock Bit Name R/W Description x 0 START R/W When this bit is 0, the LM93 operates in basic mode. All error events are masked. The auto fan control algorithm is disabled. Both PWMs are set to 0%, but the Fan Boost function operates based on default limits. All monitoring functions are active and the value registers are updated. Once this bit is set, error events are no longer globally masked, and the auto-fan control algorithm is enabled. Fan boost uses the programmed values instead of the defaults. It is expected that all limit and setup registers are set by BIOS or application software prior to setting this bit. X 1 LOCK R/W Setting this bit locks all registers and register bits that are indicated as lockable. Lockable registers have an “x”inthe Lock column of their description. This register is locked once it is set. This bit can only be cleared by an external device asserting RESET. 2 GMSK R/W Global Mask When this bit is set by software, all error events are masked. Setting this bit does not effect any other mask registers or value registers. 3 ALERT_EN R/W When this bit is set, the ALERT output is enabled. If this bit is cleared, the ALERT output is disabled. 4 P1P2_ PROCHOT R/W In some configurations it may be required to have both processors throttling at the same rate. When this bit is set, the LM93 connects P1_PROCHOT to P2_PROCHOT. If P1_PROCHOT and P2_PROCHOT are already shorted by some other means, this bit should NOT be set. Doing so would cause both PROCHOT signals to be stuck low until this bit is cleared. 6:5 RES R/W Reserved 7 READY R The LM93 sets this bit automatically after valid data has been collected for all temperatures and voltages. Software should not use any temperature or voltage values until this bit has been set. www.national.com 79 |
|
Link URL |
| Czy Alldatasheet okazała się pomocna? [ DONATE ] |
O Alldatasheet | Reklama | Kontakt | Polityka prywatności | Link do karty katalogowej | Linki | Lista producentów All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |