| Zakładka z wyszukiwarką danych komponentów |
|
STM32L162VC Arkusz danych(PDF) 81 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32L162VC Arkusz danych(HTML) 81 Page - STMicroelectronics |
|
81 / 123 page ![]() DocID022881 Rev 10 81/123 STM32L162VC, STM32L162RC 104 Output driving current The GPIOs (general purpose input/outputs) can sink or source up to ±8 mA, and sink or source up to ±20 mA with the non-standard VOL/VOH specifications given in Table 44. In the user application, the number of I/O pins which can drive current must be limited to respect the absolute maximum rating specified in Section 6.2: • The sum of the currents sourced by all the I/Os on VDD, plus the maximum Run consumption of the MCU sourced on VDD, cannot exceed the absolute maximum rating IVDD(Σ) (see Table 12). • The sum of the currents sunk by all the I/Os on VSS plus the maximum Run consumption of the MCU sunk on VSS cannot exceed the absolute maximum rating IVSS(Σ) (see Table 12). Output voltage levels Unless otherwise specified, the parameters given in Table 44 are derived from tests performed under the conditions summarized in Table 14. All I/Os are CMOS and TTL compliant. Table 44. Output voltage characteristics Symbol Parameter Conditions Min Max Unit VOL(1)(2) 1. The IIO current sunk by the device must always respect the absolute maximum rating specified in Table 12 and the sum of IIO (I/O ports and control pins) must not exceed IVSS. 2. Guaranteed by test in production. Output low level voltage for an I/O pin IIO = 8 mA 2.7 V < VDD < 3.6 V -0.4 V VOH(2)(3) 3. The IIO current sourced by the device must always respect the absolute maximum rating specified in Table 12 and the sum of IIO (I/O ports and control pins) must not exceed IVDD. Output high level voltage for an I/O pin VDD-0.4 - VOL (3)(4) Output low level voltage for an I/O pin IIO = 4 mA 1.65 V < VDD < 3.6 V -0.45 VOH (3)(4) Output high level voltage for an I/O pin VDD-0.45 - VOL(1)(4) 4. Guaranteed by characterization results. Output low level voltage for an I/O pin IIO = 20 mA 2.7 V < VDD < 3.6 V -1.3 VOH(3)(4) Output high level voltage for an I/O pin VDD-1.3 - |
|
Link URL |
| Czy Alldatasheet okazała się pomocna? [ DONATE ] |
O Alldatasheet | Reklama | Kontakt | Polityka prywatności | Link do karty katalogowej | Linki | Lista producentów All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |