TSX711 datasheet(21/31 Pages) STMICROELECTRONICS

Numer części	TSX711

Szczegółowy opis	Low-power, precision, rail-to-rail, 2.7 MHz, 16 V CMOS operational amplifiers

PDF	31 Pages

Scroll/Zoom	100%

Producent	STMICROELECTRONICS [STMicroelectronics]

Strona internetowa	http://www.st.com

Logo

21 / 31 page

TSX711, TSX711A, TSX712

Application information

DocID025959 Rev 5

21/31

Figure 35: Test configuration for Riso

5.9

PCB layout recommendations

Particular attention must be paid to the layout of the PCB, tracks connected to the amplifier,

load, and power supply. The power and ground traces are critical as they must provide

adequate energy and grounding for all circuits. The best practice is to use short and wide

PCB traces to minimize voltage drops and parasitic inductance.

In addition, to minimize parasitic impedance over the entire surface, a multi-via technique

that connects the bottom and top layer ground planes together in many locations is often

used.

The copper traces that connect the output pins to the load and supply pins should be as

wide as possible to minimize trace resistance.

5.10

Optimized application recommendation

It is recommended to place a 22 nF capacitor as close as possible to the supply pin. A

good decoupling will help to reduce electromagnetic interference impact.

Cload

VIN

VCC+

Riso

10 kΩ

VCC-

VOUT

TSX711 Arkusz danych(PDF) 21 Page - STMicroelectronics