CS5490 datasheet(5/57 Pages) CIRRUS

5 / 57 page

CS5490

DS982F3

1. OVERVIEW

The CS5490 is a CMOS power measurement integrated circuit that uses two

 analog-to-digital

converters to measure line voltage and current. The CS5490 calculates active, reactive, and apparent

power as well as RMS voltage and current and peak voltage and current. It handles other system-related

functions, such as energy pulse generation, voltage sag and swell, overcurrent and zero-crossing

detection, and line frequency measurement. A separate analog-to-digital converter is used for on-chip

temperature measurement.

The CS5490 is optimized to interface to current transformers, shunt resistors, or Rogowski coils for

current measurement, and to resistive dividers or voltage transformers for voltage measurement. Two

full-scale ranges are provided on the current input to accommodate different types of current sensors. The

CS5490’s two differential inputs have a common-mode input range from analog ground (GNDA) to the

positive analog supply (VDDA).

An on-chip voltage reference (typically 2.4 volts) is generated and provided at analog output, VREF±.

The digital output (DO) provides a variety of output signals and, depending on the mode selected,

provides energy pulses, zero-crossings, or other choices.

The CS5490 includes a UART serial host interface to an external microcontroller. The UART signals

include serial data input (RX) and serial data output (TX).

CS5490 Arkusz danych(PDF) 5 Page - Cirrus Logic