106963 datasheet(20/25 Pages) PHOENIX

20 / 25 page

TRIO-PS-2G/1AC/12DC/5/C2LPS

106963_en_00

PHOENIX CONTACT 20 / 25

Derating

16.1

Temperature-dependent derating

With an ambient temperature of up to +60°C, the device

supplies the continuous output current of I

N. In the case of

ambient temperatures above +60°C, the output current must

be reduced by 2.5 % per Kelvin increase in temperature.

The device does not switch off at ambient temperatures of

+70°C or thermal overload. The output capacity is reduced

as far as necessary to provide device protection. After it has

cooled down, the output capacity is increased again.

Figure 19

Temperature derating in normal mounting

position

16.2

Installation height

The power supply can be operated at an installation height

of up to 2000 m without any limitations. Different data

applies for installation locations above 2000 m due to the

differing air pressure and the reduced convection cooling

associated with this (see technical data section).

Figure 20

Output power depending on the installation

height

16.3

Position-dependent derating

The power supply can be installed onto all 35 mm DIN rails

according to EN 60715. The normal mounting position of the

power supply is horizontal.

When installing in a different mounting position, derating

should be adhered to.

The characteristic curve can be used to determine the

maximal output power to be drawn for each ambient

temperature for different mounting positions.

[°C]

-25

H [m]

100

125

150

175

200

= P

150 %

60 °C

Dyn.

= P

100 %

60 °C

1000

2000

3000

4000

5000

106963 Arkusz danych(PDF) 20 Page - PHOENIX CONTACT

106963 Arkusz danych(HTML) 20 Page - PHOENIX CONTACT

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

Arkusz danych Pobierz

Link URL