STMPE2401 datasheet(35/55 Pages) STMICROELECTRONICS

35 / 55 page

STMPE2401

PWM controller

35/55

11.2

PWM control and status register (PWMCS)

Bit

210

Reserved

II2

II1

II0

EN2

EN1

EN0

Read/Write

Reset Value

Table 32. Bit description

Bits

Name

Description

EN0

PWM Channel 0 Enable bit.

‘1’ – Enable the PWM Channel 0

‘0’ – Reset the PWM Channel 0. Only when the PWM channel is in reset

state, the stream of commands can be written into its data port, which in

this case is PWM_Command_Channel_0.

EN1

PWM Channel 1 Enable bit.

‘1’ – Enable the PWM Channel 1

‘0’ – Reset the PWM Channel 1. Only when the PWM channel is in reset

state, the stream of commands can be written into its data port, which in

this case is PWM_Command_Channel_1.

EN2

PWM Channel 2 Enable bit.

‘1’ – Enable the PWM Channel 2

‘0’ – Reset the PWM Channel 2. Only when the PWM channel is in reset

state, the stream of commands can be written into its data port, which in

this case is PWM_Command_Channel_2.

II0

PWM Invalid Instruction Status bit for PWM Channel 0

‘0’ – No invalid command encountered during the instruction execution.

‘1’ – Invalid command encountered and this puts the PWM Channel 0 into

reset state.

II1

PWM Invalid Instruction Status bit for PWM Channel 1

‘0’ – No invalid command encountered during the instruction execution.

‘1’ – Invalid command encountered and this puts the PWM Channel 1 into

reset state.

II2

PWM Invalid Instruction Status bit for PWM Channel 2

‘0’ – No invalid command encountered during the instruction execution.

‘1’ – Invalid command encountered and this puts the PWM Channel 2 into

reset state.

STMPE2401 Arkusz danych(PDF) 35 Page - STMicroelectronics

STMPE2401 Arkusz danych(HTML) 35 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55

Arkusz danych Pobierz

Link URL