6

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ASSEMBLY

1. Fit the castor (24) to the base

(28) using 4 bolts (16), lock

washers (17) and nuts (23).

2. Repeat for both castors.

3. Slide the right leg (32) into the

base (28) as shown, line up the

holes and insert two lock pins (26).

4. Repeat the procedure for the left

leg (31).

5. Secure the pins using the R clips

(27) and small chains (25).

• Make sure the chain

passes through the loop

shown on the left.

6. Attach the main support post (20)

onto the base assembly (28) using

five bolts (8), five washers (9) and

five nuts (10).