AS3701 datasheet(35/110 Pages) AMSOSRAM

35 / 110 page

Page 34

ams Datasheet

Document Feedback

[v1-11] 2016-Dec-14

AS3701 − Detailed Description – System Functions

Start-Up

Normal Start-Up

The following gives a brief description on a start-up from

scratch (battery or charger insertion). More details can be found

in the start-up flow chart.

A start-up can be activated from 5 different sources:

• Battery insertion from scratch

• Charger insertion from scratch (VBAT < ResVoltFall)

• ON-key has been pulled high in power_off mode

• Reset cycle

• ResVoltRise level was reached

During a normal reset cycle a normal startup happens:

• Setting USB current limit and ResVoltRise

• Startup State machine reads out the internal Boot-OTP.

The start-up sequence of SD Converter, LDOs and GPIOs

are controlled by the Boot-OTP

• Reset-Timer is set by the Boot-OTP

• The reset is released when the Reset Timer expires

(external pin XRES)

Parameter

Figure 40:

Start-Up Condition

Note(s):

1. The internal pull-down resistor is just active if the bit on_invert is set to "0" (active high configuration). If the ON-key works active

low (on_invert = 1) the internal pull-down resistor is deactivated and an external pull-up resistor is needed in push-button

configuration!

Symbol

Parameter

Note

Min

Typ

Max

Unit

VON_IL

Low level voltage

ON pin

20% of

VSUP

VON_IH

High level voltage

ON pin

60% of

VSUP

ION_PD

(1)

Pull down current

Bit on_invert = 0 (active

high)

412

μA

Detailed Description –

System Functions

AS3701 Arkusz danych(PDF) 35 Page - ams-OSRAM AG

AS3701 Arkusz danych(HTML) 35 Page - ams-OSRAM AG

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Arkusz danych Pobierz

Link URL